Page 3 - Contents
WLBARGMO Manual PB 1 1. Product Introduction ...................................................................................................3 1.1 Package Contents ............................................................................................ 3 1.2 Features ............................
Page 5 - Wall Mount Kit; compatible on-line gaming, and IM software at the same time.; Product Introduction
2 3 2 3 WLBARGMO Manual 2 3 Corega WLBARGMO is a MISO wireless broadband Router with IEEE802.11g wireless access point standard. Its MIMO XR technique can improve transmit speed and coverage area. The maximum transmit length is up to 450m and the coverage area can be six times more than general 802....
Page 6 - Hardware Introduction
WLBARGMO Manual 4 5 4 5 4 5 1.3 Hardware Introduction 134 5 7 6 2 8 9 11 10 1. Initial Button Press this button it will reset to default setting 2. WLAN LED (Green) ON:Connected 3. Power LED (Green) Indicate power status 4.Status LED (Red) Blink:Working normal ON:Firmware upgrade 5. WAN LED (Green) ...
Page 7 - Hardware Installation; Following the steps below to set up WLBARGMO and the connection.; Installation Procedure; Quick; PC with compatible wireless card for wireless connection.; Product Installation
4 5 4 5 WLBARGMO Manual 4 5 2.1 Hardware Installation Following the steps below to set up WLBARGMO and the connection. (1) Insert the cable connector into the Network Adapter embeded in PC, and insert the other side into one of LAN ports (1~4) of the Router. (2) Insert the connect into the WAN port ...
Page 8 - PC Setting
WLBARGMO Manual 6 7 6 7 6 7 3.1 TCP/IP Configuration The following steps and screenshots maybe dissimilar in different operat-ing systems. This manual takes Windows XP/2000, 95/98/ME, and Mac O/S as examples: 3.1.1 Windows XP O/S (1) Enter [Control Panel] -> click [Network Connection] -> right...
Page 10 - and
WLBARGMO Manual 8 9 8 9 (5) Click [DNS] tab, unselect [Register this connection’s address in DNS], and press [OK]. (6) Go back to [Internet Protocol TCP/IP] and press [OK].(7) Press [OK] to close [Local Area Connection Properties]. 3.1.2 Windows 2000 O/S (1) Go to [My Computer], and enter [Control P...
Page 14 - the PC is not shown this message, restart the PC manually.
WLBARGMO Manual 12 13 12 13 (4) Click [Gateway] tab, remove all the gateways, and press [OK] to close the window. (5) Go to [Network] and press [OK] to close the page.(6) The [Restart the windows] screen will pop-up, press [OK] to restart the PC. If the PC is not shown this message, restart the PC m...
Page 15 - Browser Configuration
12 13 WLBARGMO Manual 12 13 3.2 Browser Configuration 3.2.1 Windows O/S The following examples are for Windows XP O/S, skip this chapter if you are using Windows 2000/98/ME. (1) Open Internet Explorer (IE 6.0), select [ Tools] menu and click [Internet Options]. If a [Dial-up Connection] window is po...
Page 17 - Quick Network Configuration; Network Configuration
14 15 14 15 WLBARGMO Manual 14 15 4.1 Quick Network Configuration Basic configuration is required before connection your computer to the inter-net via WLBARGMO. The connection methods may be differed by your contract to the ISP. Please reconfirm your connection conditions with your ISP prior to conf...
Page 21 - Fixed IP
18 19 WLBARGMO Manual 18 19 4.1.2 Fixed IP (1) If you are subscribing Fixed IP connection from your ISP, then select [Fixed IP], and click on [Next]. (2) Enter the network setting provided by your ISP. Then click on [Next].
Page 25 - Establishing the Wireless Internet Connection
22 23 WLBARGMO Manual 22 23 (5) Open the web browser (IE 6.0), and test with any website for testing the connection. *Note: If the connection to the website fails. Please make sure the data you entered are correct , or any mistake occured in the process of the installation, such as the LAN/WAN conne...
Page 26 - (3) Connection status will appear in the bottom right of the screen.
WLBARGMO Manual 24 25 24 25 (2) Go [Control Panel] -> [Network connection] again ->Right click [ Wireless network connection] ,select [Available wireless network connection], choose one available network e.g. ) corega , and click [Connect]. (3) Connection status will appear in the bottom right...
Page 29 - Wireless Security Configuration
26 27 26 27 WLBARGMO Manual 26 27 To prevent from unlawful access to your network, you are recommended to perform wireless security setting. Type [192.168.1.1] in the browser’s address bar, press [Enter]. Enter the function menu, ad click on [802.11g/b Security set-ting] item. And select WEP or WPA ...
Page 30 - WPA Setting; cally according to the corresponding wireless network adapter.
WLBARGMO Manual 28 29 28 29 5.2 WPA Setting WPA is encrypted by a periodic update, making it more difficult to be hacked. Home users and company users are recommended to use <WPA-PSK> and <WPA-EAP> respectively. <WPA-PSK> (1) Select [ WPA2-PSK] or [ WPA/WPA2-PSK] in the column of [A...
Page 31 - staff before setting.
28 29 WLBARGMO Manual 28 29 <WPA-EAP> (1) Select [ WPA2-EAP] or [ WPA/WPA2-EAP](Recommended). in the column of [Authentication] a. [ WPA2-EAP]: The 2nd generation encryption skill performs stricter protec- tion than before. Before selection, please check the function availability of your netwo...
Page 32 - Mode; Function Introduction
WLBARGMO Manual 30 31 30 31 30 31 The chapter will briefly introduce all functions of this product, and spell them out. Log in the management program and the below interface will appear. 6.1 Features <Mode> Mode Select and switch to Router(wireless broadband router) or AP(Acess point) mode.*No...
Page 34 - Type
WLBARGMO Manual 32 33 32 33 B.For auto obtain IP (DHCP) : Type Press [MAC address clone] to obtain the Ethernet card's MAC address. Host name Please refer to your ISP internet service information, add/edit [Host name]. MTU value Maximum Transmission Unit.deafault setting:1500 Byte. Multi-NAT Setup c...
Page 35 - WAN IP address
32 33 WLBARGMO Manual 32 33 C. For fixed IP WAN IP address Please refer to your ISP internet service information. Subnet maskDefault gatewayMTU Maximum Transmission Unit. Deafault setting :1500 Byte. DNS server When [Manual Connection] is enable, two DNS server addresses can be inserted: DNS1 and DNS...
Page 40 - Configuring firewall and no response to WAN Ping requests.
WLBARGMO Manual 38 39 38 39 <Security setting> Configuring firewall and no response to WAN Ping requests. <Security setting/Connection control> This function can limit or control some certain networking services: (1) Enter the range of limited IP address.(2) Select one of limit/stop netw...
Page 41 - be displayed in the table below.
38 39 WLBARGMO Manual 38 39 <Security setting/filter list> This function can forbid users to access certain website on the Internet: (1)Enter the forbidden URL or keywords(2) Then click [save] to complete the configuration. All the forbidden data will be displayed in the table below. <Advance...
Page 43 - All routing logs are displayed in the table.
40 41 WLBARGMO Manual 40 41 <Advanced setting/Routing Table/Routing Table> All routing logs are displayed in the table. <Advanced setting/UPnP > Activating this function can detect the device or software of LAN, supporting UPnP. For example: online games supporting UPnP or Windows Messen...
Page 44 - Time Setup
WLBARGMO Manual 42 43 42 43 <Management> Admin login name User name for login this management program.Default setting is [root] . Admin login password Default password is empty . Password comfirmation Please retype password . Connection Timeout Enter connection time-out time. Back to default se...
Page 45 - Firmware update; saves to select the file.
42 43 WLBARGMO Manual 42 43 * Firmware update (1) Click [Browse] to open the data folder. Follow the route that the firmware saves to select the file. (2) After selection, click [Firmware update].(3) When the countdown starts, do not click any button. The update will complete soon afterward. *Note: ...
Page 46 - The activation processes are as follows:
WLBARGMO Manual 44 45 44 45 The activation processes are as follows: (1) Select [Enable].(2) Indicate 1 ~ 9600 for parameters of port range. e.g. ) 8080 (Recommended keeping default values). (3) Click on [Save] after completing settings. e.g. ) Assume the port value is 8080, enter IP address as the ...
Page 47 - System log is displayed in the table.
44 45 WLBARGMO Manual 44 45 <Status/Log Display/system log> System log is displayed in the table. <Status/Log Display/E-mail function> An E-mail address can be set below. Special incidents will be recorded and sent to the appointed E-mail address. After entering all information, click [S...
Page 48 - information of this product.; FAQ
WLBARGMO Manual 46 47 46 47 46 47 46 47 46 47 When the installation fails or the connection doesn’t succeed, it’s recommend-ed to take the following actions.(1) Find your problem in the troubleshooting collection.(2) Search on our official website at http://www.corega-asia.com for the latest informat...
Page 49 - until that user exits the program.
46 47 46 47 46 47 WLBARGMO Manual 46 47 46 47 (8) Has all information provided by your ISP been entered correctly? (9) Are the settings of your web browser correct? Q2. Can not access the management programA: Please confirm the following settings.(1)Is the TCP/IP address correct?(Please refer to 3.1)...
Page 50 - reset the product’s settings to default values.
WLBARGMO Manual 48 49 48 49 48 49 <Windows XP/ 2000> (1) Click [Start] => [Programs] => [Command prompt].(2) Input [ipconfig] => [Enter].(3) Confirm IP address (which sould be 192.168.1.x). If the IP is incorrect, please enter 1-byte character as [ipconfig /renew] => Press [Enter]. &l...
Page 51 - Specifications
48 49 48 49 WLBARGMO Manual 48 49 Compliance Standard WLAN:IEEE802.11, IEEE802.11b, IEEE802.11gLAN:IEEE802.3, IEEE802.3u, IEEE802.3x Interface WAN:10/100Mbps x 1 Port (RJ-45, Auto MDI/MDI-X)LAN:10/100Mbps x 4 Ports (RJ-45, Auto MDI/MDI-X) Frequency Band 2.412~2.472 GHz Transmission speed IEEE802.1...
Page 52 - About corega
WLBARGMO Manual corega 可瑞加科技於 1996 年成立於日本新橫濱,致力於提供多元化的家用 網路產品:包括乙太網路交換器、無線區域網路系列產品、路由器、藍芽系列產品、以及與網路相關的產品應用及服務。 corega 目前已是日本專業 家用網路產品的暢銷品牌,並且於 2002 年 2 月於台北成立可瑞加科技,專 注於台灣市場推廣高品質的日系家用網路設備。 corega 以使用者的需求導 向為最重要的營運方針,多樣化的產品行銷以及通路服務營造 corega 為最 親切適用的家庭網路設備第一品牌! 竭誠感謝您購買 corega 可瑞加系列產品,期待本產品為您帶來更快速便捷 的連線...
Page 53 - Federal Communication Commission Interference Statement; that may cause undesired operation.; Appendix
WLBARGMO Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a ...
Page 54 - memo