Allied Telesis AT-S101 - Manual
Allied Telesis AT-S101 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
PN 613-001604 Rev A
1
AT-S101 Version 1.3.0
Management Software for the
AT-GS950/8POE Gigabit Ethernet WebSmart Switch
Software Release Notes
Please read this document before you begin to use the management software.
Supported Platforms
The AT-S101 Version 1.3.0 is supported on the AT-GS950/8POE Gigabit Ethernet WebSmart
switch.
Product Documentation
For the AT950/8POE documentation, refer to the following guides:
AT-GS950/8POE Gigabit Ethernet WebSmart Switch Installation Guide
AT-S101
Management Software User’s Guide
Both documents are available from the Allied Telesis web site at
www.alliedtelesis.com
.
What’s New in Version 1.3.0
New Features
None
Operational Notes
The following issue was found in this release:
SFP 100 - Switch over to fiber fails after fiber link is restored. It happens when an AT-SPFX/2
100M SFP transceiver is used when a backup copper link is 1G.
Recommended User
Workaround:
Works fine when the fiber and copper speeds are similar. There are no issues
with different SFP models.
Resolved Issue
The IP address can now contain a 255 word within it. Previously, an error message was
displayed and an address containing a 255 word was not accepted.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
