Allied Telesis AT-9800 Series - Manual
Allied Telesis AT-9800 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Enabling and installing this Release
- Page 3 – Level 2
- Page 4 – Level 3
Software Maintenance Release Note
Release sb273-01
For SwitchBlade 4000 Series Switches and
AT-9800 Series Switches
Introduction
This software maintenance release note lists the issues addressed, and
enhancements made, in patch SB273-01 for Software Release 2.7.3 on existing
models of the SwitchBlade and AT-9800 series switches. Release file details are
listed in
.
This release note should be read in conjunction with the following documents:
■
SwitchBlade document Set for Software Release 2.7.3 (Document Number
C613-03100-00 REV A).
■
AT-9800 Series Switches Documentation Set for Software Release 2.7.3
(Document Number C613-03101-00 REV A).
WARNING: Using a patch for a different model or software release may cause
unpredictable results, including disruption to the network. Information in this
release note is subject to change without notice and does not represent a
commitment on the part of Allied Telesyn International. While every effort has
been made to ensure that the information contained within this document and
the features and changes described are accurate, Allied Telesyn International
can not accept any type of liability for errors in, or omissions arising from the
use of this information.
Table 1: Release file details for release SB273-01.
Base Software Release File
SB-273.rez
Maintenance Release Date
April 22 2005
Compressed Release File Name
SB262-01.rez
Compressed Release File Size
91,532 bytes
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Enabling and installing this Release Software Maintenance Release Note Release sb273-01 C613-10436-00 Rev A Some of the issues addressed in this Release Note include a level number. This number reflects the importance of the issue that has been resolved. The levels are: Enabling and installing thi...
Release sb273-01 3 Release sb273-01C613-10436-00 Rev A A reboot could occur while ageing out Firewall sessions when the device was under heavy load and had many active Firewall sessions. This issue has been resolved. (No PCR number.) When either the Firewall was enabled or multiple L2TP tunnels were...
4 Features in sb273-01 Software Maintenance Release Note Release sb273-01 C613-10436-00 Rev A Previously, when the packet overhead limits were exceeded, some packets were being silently dropped by SQoS. This issue has been resolved. Additionally, extra checking has been added to the ATM process so t...
