Allied Telesis AT-8824 - Manual

Allied Telesis AT-8824

Allied Telesis AT-8824 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 3 – Quick Install Guide; Models Covered By This Guide; Quick Install Guide updates can be downloaded from; Package Contents; One power cord retaining clip.; Documentation Roadmap
  • Page 4 – Selecting a Site; Series Hardware Reference; Installing the Switch; This equipment must be earthed.; Follow these steps to install the switch:; Read the safety information
  • Page 6 – Connect the data cables; Configuring the Switch; Using the CLI to configure a switch; Set the communication parameters
  • Page 7 – To display help on a specific topic, enter:; See the; Using the GUI to configure a switch:; Select a PC to browse to the switch from
  • Page 8 – System LEDs
Loading the manual

AT-8800 Series Switch

Quick Install Guide

AT-8824
AT-8848


"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Quick Install Guide; Models Covered By This Guide; Quick Install Guide updates can be downloaded from; Package Contents; One power cord retaining clip.; Documentation Roadmap

Quick Install Guide 3 C613-04043-01 REV D Models Covered By This Guide This Quick Install Guide includes information on the following models: ■ AT-8824 ■ AT-8848 Quick Install Guide updates can be downloaded from www.alliedtelesis.com/ support/software . Package Contents The following items are incl...

Page 4 - Selecting a Site; Series Hardware Reference; Installing the Switch; This equipment must be earthed.; Follow these steps to install the switch:; Read the safety information

4 AT-9800 Series Switch C613-04043-01 REV D Selecting a Site The switch can be installed in a standard 19-inch rack or on a level surface such as a desktop or bench. When installing the switch, choose a site that: ■ Allows adequate airflow around the switch and its vents. ■ Is free of dust and moist...

Page 6 - Connect the data cables; Configuring the Switch; Using the CLI to configure a switch; Set the communication parameters

6 AT-9800 Series Switch C613-04043-01 REV D RX and TX terminal locations on SC fibre GBIC ports are the reverse of RX and TX terminal locations on fixed SC fibre ports. When looking at an SC fibre GBIC from the front, the RX terminal is on the left and the TX terminal is on the right. 11. Connect th...

Other Allied Telesis Models

All Allied Telesis Other