Allied Telesis AT -8000S/24POE - Manual

Allied Telesis

www.alliedtelesis.com

Datasheet |

Switches

AT-8000S/24POE

Layer 2 Stackable Fast Ethernet Switch

AT-8000S/24POE

24 por t stackable 10/100TX Power over
Ethernet switch with 2 active SFP bays
(unpopulated) and 2 standby 10/100/1000T
por ts (RJ-45)

Overview

One of a series of stackable switches from
Allied Telesis, the AT-8000S/24POE provides
high performance Layer 2 switching in an
affordable fixed configuration platform
combined with Power over Ethernet to provide
power to edge devices including IP phones and
wireless access points.This switch offers 24
10/100 por ts, two fixed SFP Combo slots plus
two integrated stacking connectors that deliver
a total of 4Gbps stacking bandwidth. The
stacking capability integrated into this platform
is configured as a resilient ring topology
designed to provide high reliability and
simplified management for higher por t density
applications.

Combined Ethernet and Power for
Branch Office and Wiring Closet
Connectivity

Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices where power is
needed for remote devices. The state-of-the-ar t
QoS capability of this product ensures reliable
deliver y of advanced network ser vices such as
voice while effectively controlling the continually
increasing traffic needs found in today’s networks.

Easy Access Networking

Featuring an industr y standard CLI and Allied
Telesis’ intuitive yet fully featured Web interface
the advanced features of the AT-8000S/24POE
are accessible to a wide range of system
administrators. The well known CLI and Web
interfaces significantly reduce learning time and
minimize the cost of deployment.

Secure Management

Only authorized administrators can access the
management interface of the 8000S series.
Protocols such as SSL, SSH and SNMPv3
facilitate this protection of your network with
local or remote connections.

Securing the Network Edge

To ensure the protection of your data, it is
impor tant to control access to your network.
Protocols such as IEEE 802.1x por t-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a pre-
determined par t of your network offering guests
such benefits as Internet access while ensuring
the integrity of your private network data.

Gigabit and Fast Ethernet SFP
Support

All switches in the 8000S family suppor t both
Gigabit and Fast Ethernet Small Form-factor
Pluggables (SFPs). This makes the 8000S series
an ideal family for environments where Gigabit
fiber switches will be phased-in over time. The
8000S family allows for connectivity to the
legacy 100FX hardware until it is upgraded to
Gigabit. Suppor t for both speeds of SFPs allows
organizations to stay within budget as they
migrate to faster technologies.

Key Features

Easy, Well Known Management

•

Industr y standard CLI

•

Simple intuitive, fully featured Allied Telesis
Web Interface

•

Secure encr ypted Web and CLI management
with SSHv2 and SSL

•

SNMP

•

Two level access privileges

Power over Ethernet

•

Provides standards-based IEEE 802.3af
Power over Ethernet to all 24 10/100 por ts

•

Suppor t for up to 24 class 2 powered
devices at 7.3 watts

•

Suppor t for up to 12 class 3 powered
devices at 15.4 watts

Affordable Truly Stackable 10/100 Switching
Platform

•

Single IP address stack management

•

4G resilient ring stacking architecture

•

Across stack link aggregation

•

Across stack VLAN configuration

•

Across stack por t mirroring

•

Redundant standby stack master

All the QoS Needed in the Wiring Closet for
Today’s Voice and Data Networking

•

Eight priorities assigned to four queues

•

IEEE 802.1p for Layer 2 QoS

•

DSCP (DiffSer v) for Layer 3 QoS

•

IEEE 802.1p to DSCP remarking traffic ready
for transpor t to the Layer 3 core of the
network

•

Layer 2 and Layer 3 ACL

Securing the Network at its Most Vulnerable
Point

•

IEEE 802.1x and RADIUS network login:

for

advanced control of user authentication and
accountability

•

Guest VLAN:

to ensure visitors or unauthorized

users connect only to ser vices defined by IT
e.g. Internet

•

TACACS+:

for ease of management security

administration

•

Layer 2 and Layer 3 ACL

•

Por t MAC address security options

Power Supply Efficiency

%

+

0