Allied Telesis AT -8000S/24 - Manual

Allied Telesis

www.alliedtelesis.com

Datasheet |

Switches

AT-8000S/24

Layer 2 Stackable Fast Ethernet Switch

AT-8000S/24

24 por t stackable 10/100TX Layer 2 switch
with 2 active SFP bays (unpopulated) and
2 standby 10/100/1000T por ts (RJ-45)

Overview

One of a series of stackable switches from
Allied Telesis, the AT-8000S/24 provides high
performance Layer 2 switching in an affordable
fixed configuration platform. This switch offers
24 10/100 por ts, two fixed 1Gbps SFP slots
plus two integrated stacking connectors that
deliver a total of 4Gbps stacking bandwidth.
The stacking capability integrated into this
platform is configured as a resilient ring
topology designed to provide high reliability
and simplified management for higher por t
density applications.

Ideal Branch Office and Wiring
Closet Connectivity

Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices. The state-of-the-
ar t QoS capability of this product ensures
reliable deliver y of advanced network ser vices
such as voice while effectively controlling the
continually increasing traffic needs found in
today’s networks.

Easy Access Networking

Featuring an industr y standard CLI and Allied
Telesis’ intuitive yet fully featured Web interface
the advanced features of the AT-8000S/24 are
accessible to a wide range of system
administrators. The well known CLI and Web
interfaces significantly reduce learning time and
minimize the cost of deployment.

Secure Management

Only authorized administrators can access the
management interface of the 8000S series.
Protocols such as SSL, SSH and SNMPv3
facilitate this protection of your network with
local or remote connections.

Securing the Network Edge

To ensure the protection of your data, it is
impor tant to control access to your network.
Protocols such as IEEE 802.1x por t-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a
pre-determined par t of your network offering
guests such benefits as Internet access while
ensuring the integrity of your private network
data.

Gigabit and Fast Ethernet SFP
Support

All switches in the 8000S family suppor t both
Gigabit and Fast Ethernet Small Form-factor
Pluggables (SFPs). This makes the 8000S series
an ideal family for environments where Gigabit
fiber switches will be phased in over time. The
8000S family allows for connectivity to the
legacy 100FX hardware until it is upgraded to
Gigabit. Suppor t for both speeds of SFPs allows
organizations to stay within budget as they
migrate to faster technologies.

Key Features

Easy, Well Known Management

•

Industr y standard CLI

•

Simple intuitive, full featured Allied Telesis
Web Interface

•

Secure encr ypted Web and CLI management
with SSHv2 and SSL

•

SNMP

•

Two level access privileges

Affordable Truly Stackable 10/100
Switching Platform

•

Single IP address stack management

•

4Gig resilient ring stacking architecture

•

Across stack link aggregation

•

Across stack VLAN configuration

•

Across stack por t mirroring

•

Redundant standby stack master

All the QoS Needed in the Wiring Closet
for Today’s Voice and Data Networking

•

Eight priorities assigned to four queues

•

IEEE 802.1p for Layer 2 QoS

•

DSCP (DiffSer v) for Layer 3 QoS

•

IEEE 802.1p to DSCP remarking traffic ready for
transpor t to the Layer 3 core of the network

•

Layer 2 and Layer 3 ACL

Securing the Network at its Most
Vulnerable Point

•

IEEE 802.1x and RADIUS network login:

for

advanced control of user authentication and
accountability

•

Guest VLAN:

to ensure visitors or unauthorized

users connect only to ser vices defined by IT. E.g.
Internet

•

TACACS+:

for ease of management security

administration

•

Layer 2 and Layer 3 ACL

•

Por t MAC address security options

Power Supply Efficiency

%

+