Allied Telesis AT-8000GS/48 - Manual
Allied Telesis AT-8000GS/48 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Upgrade Procedure; Upgrading the AT-S95 Bootloader Code and Software with the CLI; The following is an example display of this command:
- Page 3 – Note; AT-S95 Management Software CLI
- Page 7 – Find; The software is available for download at; History of Resolved Issues
- Page 8 – Online Help— Issue with the device help has been resolved (CQ 119900).; History of Newly Introduced Features; Table 1: New Command Description
- Page 9 – Contacting Allied Telesis; . You can use the Knowledge Base to submit questions to our; Copyright
PN 613-001481 Rev A
1
AT-S95 Version 2.0.0.24
AT-8000GS Switch
Software Release Notes
Please read this document before you begin to use the management software.
The following topics are included in this document
“Supported Platforms” on page 1
“Product Documentation” on page 6
“Newly Introduced Feature” on page 6
“Where to Find Product Information and Management Software Updates” on page 7
“Contacting Allied Telesis” on page 9
Supported Platforms
The following platforms are included in the AT-8000GS family of devices:
AT-8000GS/24 switch— 24 GE ports with modular configuration 4 x combo 10/100/1000 SFP
ports and 2 HDMI interface 5G stacking ports.
AT-8000GS/24POE switch— 24 GE ports with modular configuration 4 x combo 10/100/1000
SFP Combo ports and 2 HDMI interface 5G stacking ports, with support for Power over
Ethernet; class 2 devices (max 7.3W) on all ports or class 3 devices (max 15.4W) on 12
ports.
AT-8000GS/48 switch— 48 GE ports with modular configuration 4 x combo 10/100/1000 SFP
Combo ports and 2 HDMI interface 5G stacking ports.
The AT-8000GS/24, AT-8000GS/24POE, and AT-8000GS/48 switches can be combined together
in a six-unit high stack.
Caution
Make sure you have the latest Boot Loader, version 2.0.0.1, installed on an AT-8000GS
switch before you upgrade the AT-S95 Management software to Version 2.0.0.24. If you
stack devices, make sure that all of the devices in a stack are running the Boot Loader ver-
sion 2.0.0.1
before
you upgrade AT-S95 Management software to Version 2.0.0.24.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
AT-S95 Version 2.0.0.24 Software Release Notes PN 613-001481 Rev A 2 Allied Telesis, Inc. Upgrade Procedure This section describes how to upgrade the AT-S95 bootloader and software to the latest version using both the CLI and web interfaces. See the following subsections: “Upgrading the AT-S95 Boo...
AT-S95 Version 2.0.0.24 Software Release Notes PN 613-001481 Rev A 3 Allied Telesis, Inc. 6. Reboot the device with the following command: console# reload This command causes the switch to reboot. By the end of the reboot process, the final code drop will be running. Note To upgrade stacked AT-8000G...
AT-S95 Version 2.0.0.24 Software Release Notes PN 613-001481 Rev A 7 Allied Telesis, Inc. Stack: Master and backup are 24 ports non PoE, slave unit 3 is 48 ports. When reloading unit 2 the master reboots rarely. DHCP Option 82: the device doesn’t recognize option 82 fields that refer to the devi...
