Allied Telesis AT-8000GS/24POE - Manual

Allied Telesis

www.alliedtelesis.com

Datasheet |

Switches

AT-8000GS/24POE

Layer 2 Stackable Gigabit Power over Ethernet Switch

AT-8000GS/24POE

24 por t stackable 10/100/1000T Power over
Ethernet Layer 2 switch with 4 standby SFP
bays (unpopulated)

Overview

One of a series of high performance Gigabit
Ethernet stackable switches from Allied Telesis,
the AT-8000GS/24POE provides high
performance Layer 2 switching in an affordable
fixed configuration platform combined with
Power over Ethernet for edge devices such as
IEEE 802.11n access points, IP phones or IP
cameras. This switch offers 24 10/100/1000
por ts, with four combo 1Gbps SFP slots. Two
integrated stacking connectors deliver a total of
20Gbps stacking bandwidth. The stacking
capability integrated into this platform is
configured as a resilient ring topology designed
to provide high reliability and simplified
management for higher por t density
applications. Suppor t for jumbo Ethernet
frames enables higher throughput of time
sensitive data.

Ideal Branch Office and Wiring
Closet Connectivity Where Power
over Gigabit Ethernet is Needed

Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices. The state-of-the
ar t QoS capability of this product ensures
reliable deliver y of advanced network ser vices
such as voice while effectively controlling the
continually increasing traffic needs found in
today’s networks.

Easy Access Networking

Featuring an industr y standard CLI and Allied
Telesis’ intuitive yet fully featured Web interface
the advanced features of the
AT-8000GS/24POE are accessible to a wide
range of system administrators. The well known
CLI and Web interfaces significantly reduce
learning time and minimize the cost of
deployment.

Secure Management

Only authorized administrators can access the
management interface of the 8000GS series.
Protocols such as SSL, SSH and SNMPv3
facilitate this protection of your network with
local or remote connections.

Securing the Network Edge

To ensure the protection of your data, it is
impor tant to control access to your network.
Protocols such as IEEE 802.1x por t-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a
pre-determined par t of your network offering
guests such benefits as Internet access while
ensuring the integrity of your private network
data.

Key Features

Easy, Well Known Management

•

Industr y standard CLI

•

Simple intuitive, full featured Allied Telesis
Web Interface

•

Secure encr ypted Web and CLI management
with SSHv2 and SSL

•

Two levels access privileges

•

SNMP

Power over Ethernet

•

Provides standards-based IEEE 802.3af

•

Power over Ethernet to all 24 10/100/1000 ports

•

Support for up to 18 class 2 powered devices at
7.3 watts

•

Support for up to 9 class 3 powered devices at
15.4 watts

Affordable Truly Stackable 10/100/1000
Switching Platform

•

Single IP address stack management

•

20Gig resilient ring stacking architecture

•

Across stack link aggregation

•

Across stack VLAN configuration

•

Across stack por t mirroring

•

Redundant standby stack master

All the QoS Needed in the Wiring Closet
for Today’s Voice and Data Networking

•

Eight priorities assigned to four queues

•

IEEE 802.1p for Layer 2 QoS

•

DSCP (DiffSer v) for Layer 3 QoS

•

IEEE 802.1p to DSCP remarking traffic ready for
transpor t to the Layer 3 core of the network

•

Layer 2 and Layer 3 Access Control Lists (ACL)

Securing the Network at its Most
Vulnerable Point

•

IEEE 802.1x and RADIUS network login:

for

advanced control of user authentication and
accountability

•

Guest VLAN:

to ensure visitors or unauthorized

users connect only to ser vices defined by IT. E.g.
Internet

•

TACACS+:

for ease of management security

administration

•

Layer 2 and Layer 3 Access Control Lists (ACL)

•

Por t MAC Address security options