Allied Telesis AT-2701FTXA/ST-901 - Manual
Allied Telesis AT-2701FTXA/ST-901 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
The Allied Telesis AT-2701FTXa 100Mbps Fast Ethernet dual-port fiber and
copper network interface card features a small footprint and a low-profile
option, making it a perfect choice for PCs equipped with small desktop
solutions.
Management Software
»
» VLAN»support
Advanced Properties
»
» PCI»2.2»compliant
»
» Wake-on-LAN»(WoL)»
supported»(enabled»by»default,»
utility»to»disable»available»in»
firmware)
»
» Secured»transmissions
»
» Diagnostics
»
» Remote»boot»(PXE»2.1)
»
» Driver»support»for»popular»
operating»systems
»
» RJ-45»connector
»
» Available»with»SC»or»ST»»
connections
»
» Compliant»with»the»Trade»
Agreement»Act
»
» Microsoft-certified»drivers
»
» RoHS»compliant
»
» Low-profile»and»standard»
height»brackets»included
»
» IPv6
»
» Can»also»be»used»in»PCI-x»bus
Manageability and Flexibility
The AT-2701FTXa features a full line of
card assistant software. With a choice
of connectors — ST or SC — the AT-
2701FTXa meets the requirements of
most installations.
Key Features
Specifications
Management Features
Windows»Management»Instrumentation»( WMI)
ACPI»2.0/w01
PXE»2.1»Boot»ROM
Bus Type
PCI»2.2
Network Type
100FX
10/100TX
Network Controller
Realtek»8139
Ethernet
IEEE»802.1Q»
VLANs
IEEE»802.2»
LLC
IEEE»802.3ac»
MAC
IEEE»802.3u»
Fast»Ethernet
Drivers
Windows»7,»64-bit
Windows»7,»32-bit
Windows»XP,»32-bit
Linux»2.6
Interface Type and Connectors
SC»connector
ST»connector
RJ-45»connector
Optical»receive»sensitivity»(typ)»
-34»dBm
Transmit»optical»power»(min/max)»
-19»/»-14»dBm
Status Indicators
LNK»
On»
Active»Port»(Fiber»or»Copper)»link»up
»
Off»
Active»Port»(Fiber»or»Copper)»link»down
ACT»
Blink» Activity»
Power
Typical»power»consumption» 2.5»Watts»at»3.3V
Signaling»voltage»
3.3»/»5V
Environmental Specifications
Operating»temperature»»
0ºC»to»40ºC»(32°F»to»104°F)
Relative»humidity»»
5%»to»90%»(non-condensing)
Storage»temperature»»
-25ºC»to»70ºC»(-13°F»to»158°F)
Physical Characteristics
Dimensions»( W»x»H)»»
12.5»cm»x»6.4»cm»(4.9»in»x»2.5»in)
Ships»with»low-profile»bracket»attached»to»interface»card.»
Standard»bracket»included»in»packaging.
Ordering Information
AT-2701FTXa/aa-xxx
100Mbps Fast Ethernet dual-port fiber and copper
network interface card
Where»aa»=» SC»or»ST
Where»xxx»=» 001»for»single»pack
» »
901»for»single»pack,»Federal»and»Government
Ships»with»low-profile»bracket»attached»to»interface»card.
Standard»bracket»is»included»in»packaging.
617-000456 Rev. A
Compliance
RoHS
UL
FCC/EN55022»Class»A
TUV
EN55024
CE
C-TICK
VCCI
alliedtelesis
.com
© 2012 Allied Telesis, Inc. All rights reser ved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the proper ty of their respective owners.
North America Headquarters
|
19800 Nor th Creek Parkway
|
Suite 100
|
Bothell
|
WA 98011
|
USA
|
T: +1 800 424 4284
|
F: +1 425 481 3895
Asia-Pacific Headquarters
|
11 Tai Seng Link
|
Singapore
|
534182
|
T: +65 6383 3832
|
F: +65 6383 3830
EMEA & CSA Operations
|
Antareslaan 18
|
2132 JE Hoofddorp
|
Netherlands
|
T: +31 23 5656800
|
F: +31 23 5575466
AT-2701FTXa
PCI 32-bIt Fast EthErnEt FIbEr anD COPPEr
nEtwOrk IntErFaCE CarD
Network Interface Cards
PRODUCT INFORMATION
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.