Page 2 - Introduction; Who Should Read This Guide?; Reason for Update
© 2005 Allied Telesyn Networks. All rights reserved. Information subject to change without notice. Introduction Congratulations on your purchase of a Allied Telesyn™ 910x, integrated Multiservice Access Platform (iMAP) product. This product is part of a family of products that leverages Ethernet swi...
Page 3 - Table of Contents
Table of Contents Telesyn 9100 Installation Guide (Table of Contents) 1 Installation of Allied Telesyn 9100 - - - - - - - - - - - - - - - - - - - 1-1 1.1 Installation Overview for the 9100 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1 1.1.1 Allied Telesyn 9100 Confi...
Page 5 - Installation of Allied Telesyn 9100
1-1 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1. Installation of Allied Telesyn 9100 1.1 Installation Overview for the 9100 1.1.1 Allied Telesyn 9100 Configuration The Allied Telesyn™ 9100 is shelf mounted with one Central Fabric Controller (CFC12) and Service Modules (SM...
Page 7 - Site Requirements for Allied Telesyn 9101
9101 Site Requirements Selecting a Site for the 9100 1-3 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1.3.1 9101 Site Requirements The Allied Telesyn 9101 is installed in a environment that is affected by the existing installed equipment and the specific requirements of the ...
Page 9 - Telesyn 9100 Space Requirements for Open Rack Environment (
9102/9103 Site Requirements Selecting a Site for the 9100 1-5 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) FIGURE 1-3 Telesyn 9100 Space Requirements for Open Rack Environment ( Table 1-2 and Table 1-3 )
Page 10 - Customer Item Checklist
Setup Checklist 9101 Parts Included in Order Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-6 1.4 Setup Checklist 1.4.1 9101 Parts Included in Order Allied Telesyn provides and ships certain parts with each order. Table 1-4 lists the items that are shipped with the 9101 Note...
Page 12 - Shelf Mounting Options
Shelf Mounting Options 9101 Mounting Options Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-8 Table 1-8 lists the items that are to be provided by the customer. 1.5 Shelf Mounting Options Three mounting options are available for the 9101; front, center, and wall. Note: The w...
Page 13 - Front mount option for 9101
9101 Mounting Options Shelf Mounting Options 1-9 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) FIGURE 1-4 Front mount option for 9101 1. Place the brackets in the appropriate location as shown in Figure 1-4 . 2. Using the M3 x 6mm screws, mount the front brackets.
Page 17 - Rear Bracket Attachment for 9102/3
9102/3 Mounting Options Shelf Mounting Options 1-13 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1.5.2.3 Attaching the Extension Brackets and Rear Brackets Caution: Two persons are required to mount the 9102/3, with one person in front of and another person behind the unit. ...
Page 18 - Wall Mounting Option
Wall Mounting Option Overview Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-14 1.6 Wall Mounting Option 1.6.1 Overview If the customer wishes to wall mount the unit, there is a separate kit available through an Allied Telesyn repre-sentative. This kit includes: • Four brack...
Page 19 - through; Allied Telesyn 9100 Installation Safety
Installing the Wall Mount Allied Telesyn 9100 Installation Safety 1-15 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) Caution: The customer must ensure that the weight of a fully configured unit can be supported by the mounting hardware/support used with the brackets. 1.6.2 In...
Page 20 - Safety Precautions While Working with Electricity; Power Off
Allied Telesyn 9100 Installation Safety Safety Precautions While Working with Electricity Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-16 • The user should not perform any action that creates an unsafe or hazardous situation for themselves or other personnel. 1.7.2 Safety ...
Page 21 - Precautions and Conformance Standards
Precautions and Conformance Standards Allied Telesyn 9100 Installation Safety 1-17 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 3. Connect the clip from the ESD-preventative device to an unpainted surface of the frame, rack or ESD point on the chassis frame connecting it dir...
Page 22 - Installing Power and Ground for the 9101
Installing Power and Ground for the 9101 Laser Safety Instructions Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-18 1.7.5 Laser Safety Instructions 1.8 Installing Power and Ground for the 9101 1.8.1 Power and Grounding Cautions Power and the primary ground for the Allied Te...
Page 23 - The branch circuit overcurrent protection must be rated 15A.
Connect Power and Ground Installing Power and Ground for the 9101 1-19 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1.8.2 Connect Power and Ground The Allied Telesyn 9101 is shipped with a power entry module plug. The user connects power and ground to this plug, plugs it int...
Page 25 - 100 PEM plug with connections indicated
Connect the -48VDC office power supply to the 9101 PEM plug. Installing Power and Ground for the 9101 1-21 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1.8.3 Connect the -48VDC office power supply to the 9101 PEM plug. 1. Loosen the screws. 2. Using cables colored as in Figu...
Page 26 - Installing Power and Ground for the 9101
Installing Power and Ground for the 9101 Connect to Power Source (Single or Dual) Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-22 1.8.4 Connect to Power Source (Single or Dual) The user can decide to connect the A and B feeds to a single power source or a different power s...
Page 27 - Installing Power and Ground for the 9102
Connect Power and Ground Installing Power and Ground for the 9102 1-23 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1.9 Installing Power and Ground for the 9102 1.9.1 Connect Power and Ground The Allied Telesyn 9102 comes with a pre-installed AC power converter. (The 9103 co...
Page 28 - Install Card Modules; Latches in Open and Locked Position
Install Card Modules Install the CFC12 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-24 1.11 Install Card Modules 1.11.1 Install the CFC12 Note: Do not attempt to install system cards without observing correct antistatic procedures. Failure to do so may damage cards. 1. Tak...
Page 29 - Detail of the card latch in Open Position (Card Below is Locked)
Install the Service Module Install Card Modules 1-25 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) FIGURE 1-15 Detail of the card latch in Open Position (Card Below is Locked) 1.11.2 Install the Service Module The Service Modules can be placed in any of slots 0, 1 and 2. It i...
Page 30 - Configure Local Terminal or PC
Configure Local Terminal or PC Install Filler Plates (FPF) Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-26 1.11.4 Install Filler Plates (FPF) For the Allied Telesyn 9101/9102, and 9103, FPFs are installed in empty service module slots. To install the FPF: 1. Hold the FPF c...
Page 31 - Default Asynchronous Port Settings
Install Filler Plates (FPF) Configure Local Terminal or PC 1-27 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) • Carrier Detect The settings for the CONSOLE port are factory configured with the following default values Note: When using the CONSOLE port, ensure that the termina...
Page 32 - Connect System Cables; 101 Cable Connections - To Be Supplied; Service Modules with RJ21connectors; RJ-21 Cable Connector
Connect System Cables Service Modules with RJ21connectors Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-28 1.13 Connect System Cables The following figure illustrates system cable connector locations. FIGURE 1-16 9101 Cable Connections - To Be Supplied 1.13.1 Service Module...
Page 33 - FE10 Cable Connector; FE10 RJ45 Connector Dressing
SMs with RJ45 connectors Connect System Cables 1-29 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1.13.2 SMs with RJ45 connectors Attach the RJ45 end of the Ethernet cable to the specified port on the FE10 card. FIGURE 1-18 FE10 Cable Connector Note: Each RJ45 cable connected...
Page 35 - Apply Power and Check Startup Sequence
Data Management Cable (MGMT Port on CFC12) Apply Power and Check Startup Sequence 1-31 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1.14 Apply Power and Check Startup Sequence 1. For the 9101, insert Fuse A and then Fuse B into the 9101 PEM. 2. For the 9102, set the AC Power...
Page 36 - officer
Apply Power and Check Startup Sequence Data Management Cable (MGMT Port on CFC12) Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-32 @@@@@@@@@@@" "@@@@@ " @@@@@@@@@@@@@" Allied Telesyn Networks, Inc. Allied Telesyn 12G Central Fabric Controller Version 7.0.0.A...
Page 37 - Check the configuration
Check software load Check the configuration 1-33 Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 7. Check the management logs for any problems by typing the following: > SHOW LOG SEVERITY=CRITICAL > SHOW LOG SEVERITY=MAJOR > SHOW LOG SEVERITY=MINOR 8. Check for any ala...
Page 38 - Adding AC Power Module; contact tech support
Adding AC Power Module Check management interfaces Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100) 1-34 1.16 Adding AC Power Module To Be Supplied Caution: When adding a power supply, ensure power is not being applied and the switch for the AC supply is in the Off (-) position....
Page 39 - Glossary of Terms
2-1 Telesyn x400 Series - User Guide (Appendix) 2. Appendix 2.1 Glossary of Terms To Be Supplied
