Allied Telesis 86222-10 - Manual
Allied Telesis 86222-10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Base Software Release File
- Page 7 – Network affecting: No
- Page 8 – Patch Release Note
- Page 13 – Availability; licence or password is not required to use a patch.
S i m p l y c o n n e c t i n g t h e w o r l d
Patch Release Note
Patch 86222-10
For Rapier Switches and AR800 Series
Modular Switching Routers
Introduction
This patch release note lists the issues addressed and enhancements made in
patch 86222-10 for Software Release 2.2.2 on existing models of Rapier L3
managed switches and AR800 Series L3 modular switching routers. Patch file
details are listed in Table 1.
This release note should be read in conjunction with the following documents:
■
Release Note: Software Release 2.2.2 for Rapier Switches, AR300 and
AR700 Series Routers, and AR800 Series Modular Switching Routers
(Document Number C613-10313-00 Rev A) available from
www.alliedtelesyn.co.nz/documentation/documentation.html
■
Rapier Switch Documentation Set for Software Release 2.2.1 available on
the Documentation and Tools CD-ROM packaged with your switch, or
from
www.alliedtelesyn.co.nz/documentation/documentation.html
■
AR800 Series Modular Switching Router Documentation Set for Software
Release 2.2.1 available on the Documentation and Tools CD-ROM
packaged with your switching router, or from
documentation/documentation.html
WARNING: Using a patch for a different model or software release may cause
unpredictable results, including disruption to the network. Information in this
release note is subject to change without notice and does not represent a
commitment on the part of Allied Telesyn International. While every effort has
been made to ensure that the information contained within this document and
the features and changes described are accurate, Allied Telesyn International
can not accept any type of liability for errors in, or omissions arising from the
use of this information.
Table 1: Patch file details for Patch 86222-10.
Base Software Release File
86s-222.rez
Patch Release Date
29-Nov-2001
Compressed Patch File Name
86222-10.paz
Compressed Patch File Size
295536 bytes
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Patch Release Note Patch 86222-10 for Software Release 2.2.2 C613-10319-00 REV J Some switch chip register settings have been optimised to improve the provision of CoS with the newer revision of switching silicon. Features in 86222-09 Patch file details for Patch 86222-09 are listed in Table 2. Pa...
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers 7 Patch 86222-10 for Software Release 2.2.2C613-10319-00 REV J A switch port that was transmitting STP BPDUs and also mirroring its transmit traffic to the mirror port caused a fatal error. This issue has been resolved. Fe...
8 Patch Release Note Patch 86222-10 for Software Release 2.2.2 C613-10319-00 REV J A39 copper uplink modules in the Rapier G6 sometimes experienced spurious link up or link down events. This issue has been resolved. The enterprise MIB now supports objects for power supply monitoring. Certificates co...
