AIRCAT 6255 - User Manual

Angle Die Grinder

Model # 6255 /Composite

Operating Instructions, Parts List,

Warranty, & Warranty Repair Centers

IMPORTANT!

Read carefully before operating this tool. Failure to operate any power

tool properly can result in personal injury and/or property damage!

SPECIFICATIONS

Sound------------------------------- 82DBA

Air Flow Pressure(PSI)-----------------90

Free Speed(RPM)--------------------20,000
Avg.Air Consump.(cfm)---------------- 9.5

Hose Size(ID)------------------------- 3/8”

Shipping Wt.(LBS)-----------------------1.3

Air Inlet(NPT)-------------------------1/4”

Safety

1.

Read all instructions before operating your tool

2.

Always wear protective eye gear. Use a dust mask if the operation creates dust.

3.

Wear gloves and protective clothing to avoid injuries caused by malfunctioning
attachments or improperly clamped work.

4.

Never use the tool over 90 psi, its free speed will increase in proportion to any
increase in air pressure above 90 psi.

5.

USE ACCESSORIES ON THIS TOOL.

6.

DISCONNECT TOOL FROM AIR SUPLY BEFORE CHANGING ANY ACCESSORY ON THIS
TOOL. Do not perform service work on tool while connected to air supply.

7.

If a sudden change occurs in the feel or sound of the unit, the tool should be
immediately turned off and head inspected for damage.

8.

Handle the tool safely. Do not carry the tool with a finger on or near the throttle
or trigger while the tool is connected to the air supply. Do not carry the tool by
the hose. Protect the hose from sharp objects and heat.

9.

When not in use, disconnect tool from air supply to prevent accidental or
unauthorized use.

10.

Always use tool a safe distance from other people in work area.

11.

Do not attempt to alter any part of this tool in any way, shape or form.

Lubrication

Lubricate daily with good grade of air tool oil. Lubricate motor before using. In
in-line lubricator is not used, add a few drops of oil into air inlet daily. Do not flood
this tool with oil.

GREASE HEAD GEARS DAILY.

Notice

90% of all Air Tool problems are caused by

moisture in air lines

This problem can be avoided by using Air Tool Lubricant

(See “Lubrication” & “Air Supply” sections of this manual)

FAILURE TO OIL can void your warranty

2 YEAR LIMITED WARRANTY

AIRCAT® and NITOCAT ® air tools are warranted to be free from defects in material

and workmanship for

2 years from date of purchase. We will repair or replace; at our

option any defective part or unit which proves to be defective in material or

workmanship during this 2 year period.

The foregoing obligation is AIRCAT and Florida Pneumatics’ sole liability under this or

any implied warranty, under no circumstances shall it be liable for any incidental or

consequential damages.

This warranty applies to the tool only. The warranty does not apply to any attached

accessories/consumable products; such as drill chucks, sander backing pads, air

hammer retainers and chisels or “kit” accessories or any other accessory included

with the tool.

Any repair required due to normal wear and tear, abuse, misuse, modification of the

tool or repair attempts (by other than an AIRCAT or Florida Pneumatic Authorized

Service Center) are not covered by this warranty.

Return your tool to an AIRCAT or Florida Pneumatic Authorized Service Center freight

prepaid. Be sure to include your name, address, copy of purchase with date and

description of the suspected defect.

See enclosed list for your nearest Warranty Repair Center.