Aiphone NDRM - Manual
Aiphone NDRM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TERMINAL BOARD ASSEMBLY LAYOUT:
- Page 4 – WIRING DIAGRAMS; A. CONNECTION OF MAIN TERMINAL TO MASTER AND ADD-ON; Mother Board
- Page 5 – B. SYSTEM USED FOR SELECTIVE DOOR RELEASE OR CCTV CAMERA CALL-UP; Intercom
- Page 6 – C. SYSTEM WITH BOTH DOOR RELEASE AND CCTV CAMERA CALL-UP
- Page 8 – OPERATIONS & SPECIFICATIONS
- Page 9 – Toll Free Technical Support; WARRANTY; 4V DC at master. Use PS-2420UL for master and each add-on selector
- INSTRUCTIONS -
The NDRM Rack Mount Communication and Access/Camera Control System is designed for communication
between a central master console and remote intercom stations. In addition to communication to remote locations,
an external device can be activated, such as a CCTV camera when the associated sub station is selected, a door
strike or maglock can be selectively controlled, or both functions can be included. All other features, functions,
and components are the same as a standard NEM system.
NDRM
Rack Mount Communication and Access/Camera Control System
Special
Order
Products
Pg. 1
1
NAMES & FEATURES
FEATURES:
• Rack mount master available with 12, and 20 station capacity, occupying 3 rack spaces
• Add-on panels available with 20 or 40 station capacity, occupying 3 rack spaces
• Field expandable with 4 station add-on kit (NDRM-12 and NDA-20 only)
• Expandable to 100 intercom stations with All Call
• Simplex open voice communication
• Modular handset jack for VOX handset or headset communication to remote station(s)
• Intercom channels with LED status indication (calling in and communicating)
• Selective door release and CCTV camera activation while in communication with a remote station
• Call-in LED and tone stay on until call is answered
• Built-in All Call for up to 100 stations
• One master, or dual master w/NEW-5 adaptor per 5 subs
NAMES & FUNCTIONS:
1. All Call Volume
2. Transmit Volume
3. Receive Volume
4. Call Tone Volume
5. LED Test
6. Door Release Button
7. Speaker
8. Directory Card
9. Handset ON/OFF Button & Light
10. Handset/Headset Jack
11. Microphone
12. Power LED
13. Power Switch
14. Receive Volume (3 postion switch)
NDRM-20 (pictured)
15. Tone Volume (3 postion switch)
16. Monitor LED
17. All Call Button
18. Talk Button
19. Off Button
20. Reset Button (optional feature)
21. Station Selector Switch
22. Station Selector LED
23. Station select switches 1~4
24. Station select switches 5~8
25. Station select switches 9~12
26. Station select switches 13~16
27. Station select switches 17~20
4
1
2
3
5
6
7
8
10
9
11
13
12
22
21
20
19
18
17
16
15
14
Master Consoles:
NDRM-12
NDRM-20
Add-On Consoles:
NDA-20
NDA-40
1103
23
24
25
26
27
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Pg. 2 2 COMPONENTS & WIRING TERMINAL DEFINITIONS CP-544 - Sub & Relay connection PC Board: NO Normally open side of momentary relay contact (activated when door release button is pressed) COM Common side of momentary relay contact (activated when door release button is pressed) NC Normally c...
IMPORTANT! Make sure that the appropriate mother terminal board(CP-543A) is connected to the master and add-onselector(s). Master and add-on mother terminal boardsare NOT interchangeable. NDRM-20 (Back View) 3 WIRING DIAGRAMS A+ A- B- B+ Q H ESBY V1A1V2A2 CN 1 Mother Board CP-543A (Included Ribbon c...
To Video Switcher *** To Video Switcher *** 3 WIRING DIAGRAMS 3B. SYSTEM USED FOR SELECTIVE DOOR RELEASE OR CCTV CAMERA CALL-UP WIRING DIAGRAM: CP544 * Yellow and Orange wires fromNE-NVP-RA connect directly tomaster board (CP543) "H" & "S"terminals.**Normally Open contacts remain...
