Aiphone LS-NVP - Manual
Aiphone LS-NVP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
- INSTRUCTIONS -
The LS-NVP/C is a vandal proof and weather resistant sub station designed for use with the systems listed
above. It's constructed of 12 gauge carbon steel with a white powder-coated finish. The LS-NVP/C mounts
vertically, either flush into a 3-gang masonry box, or surface mounted with the SBX-NVP.
Each unit includes tamper proof screws and tool for installation.
Vandal Proof Sub Station for LAF-C, LEF, LEM, AP-M, MP-S Systems
SBX-NVP
Surface Mount Box for LS-NVP/C
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
Toll Free Technical Support:
1-800-692-0200
E-mail [email protected]
LS-NVP/C Instr.
0512JD
SPECIFICATIONS:
Power Source:
Supplied by master station
Speaker:
20 ohms, 2.5" diameter, water proof and puncture resistant, 2.4 oz. ceramic magnet
Call Button:
SPST call button. Call tone rings at master as long as button is held down. LED will remain lit for approx.
20 seconds (LEF, LEM-3, MP-3S, AP-5/10M only). Call tone only on LEM-1DL, LEM-1, and MP-1S.
Communication:
Hands free at sub. Master is push-to-talk,release-to-listen.
Faceplate:
12 gauge carbon steel with powder-coated white baked epoxy finish
Mounting:
Flush mount into a 3-gang masonry type box. (Raco model 692 or equivalent.) Surface mount into
SBX-NVP, sold separately.
Mounting Hardware:
T10 Torx tamper proof screws and tool included (6x32 for use with flush gang box)
Terminations:
Color-coded prewired pigtails
Wiring:
2 conductors in a 1-master LEF, MP-S, or AP-M system. 3 conductors in multi-master LEF.
Shielded cable is recommended. Use Aiphone #822202 for LEM or MP-S. Use #822202 or
#822203 for LEF. Use #832202 for AP-M systems.
Wiring Distance:
See system that unit is being used with for distance specifications.
Dimensions (H x W x D): LS-NVP/C alone: 7-1/2" x 5-1/2" x 2". With SBX-NVP: 8-5/8" x 6-5/8" x 2-1/4"
Mounting Depth:
Provide mounting box with a minimum depth of 2-1/2" to allow space for internal components.
+
-
1
2
~
10
E
+
-
Red
Blk*
Blu
Red
Blk*
Blu
LAF-C or LEF
Master
LS-NVP/C
LS-NVP/C
PS-1225UL
* In single master system, 2 conductors homerun can be used with the
BLK and BLU wires tied together and "E" and "-" jumpered at the master.
WIRING DIAGRAMS:
1
E
~
10
E
AP-M or MP-S
Master
Red
Blk
Blu
LS-NVP/C
Red
Blk
Blu
LS-NVP/C
Tie Blk and Blu wires
together for all installations
with the MP-S and AP-M
systems.
5-½”
7-½”
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
