Aiphone LAF/LDF - Manual
Aiphone LAF/LDF – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Org
Brn
Yel
Grn
TONE
- INSTRUCTIONS -
The BA-1 Paging Adaptor allows paging to external speakers from the NEM, LAF, LEF, LDF
and LEM series master stations. For each zone of paging, use a BA-1 with the appropriate
sized amplifier. The BA-1 provides outgoing paging only. Talkback is not available.
WIRING DIAGRAM:
Paging Adaptor
Use with:
1
2
3
4
5
E
NEM, LAF
or LEF
Master
HOT
GND
OUTPUT
TO PAGING
SPEAKERS
TONE: Control to adjust the
paging volume
BA-1
NOTES:
1. The above example shows station 5 accessing the paging
zone. Any unused station can be used for a paging zone.
2. The colored wires at each end of the BA-1 are the Input and
Output. Connect them to the intercom and amplifier as
shown.
3. Only wiring concerning the BA-1 is shown here. For
complete installation information see the system's instruction
manual.
4. The TONE control is located on the top of the BA-1, and
requires a screwdriver for adjustment.
BA-1 COLOR CODE DEFINITIONS:
Org:
Hot side of output
(Connect to amplifier input)
Brn:
Ground side of output
(Connect to amplifier input)
Yel:
Hot side of BA-1 input
(Connect to station # on master)
Grn:
Ground side of input
(Connect to "E" terminal on master)
SPECIFICATIONS:
Power Source: Supplied by master
Input:
20 ohms
Output:
10K ohms
Amplifier input
requirements: Aux input (10K ohms)
Dimensions:
4-1/8"H x 2-1/2"W x 1-1/2"D
Amplifier
OUTPUT
INPUT
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
E-MAIL: [email protected]
BA-1 Instr.
0705jdjs
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
