Aiphone KB-SWM - Manual

Aiphone KB-SWM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Streamline design, can be semi flush mounted or surface mounted
Color CCD camera with tilt control
Configure from 2 to 12 call buttons per entry, using 1-, 2-, or 3-button modular panels
Backlit call button directory for easy viewing of names at night
Weather resistant for outdoor use
Hands free communication from entry panel
Automatic night mode LED
Employs KB series room stations
Up to three video entry stations per tenant
Up to five inside stations per tenant
Selective door release from each tenant location when using RY-3DL (one per tenant)
Easy homerun wiring from entry to each tenant using Aiphone series wire # 871802

The KB-MV series is a color video multi-unit entry system that can be configured for buildings with two to
twelve tenant locations. Up to three video entrance stations can be used in one system. The color camera can
be tilted upward for a better view of the visitor, and the speaker/microphone provides hands free
communication at the entrance panel. Inside each tenant location, the standard Aiphone KB series audio/video
stations are employed, allowing up to five monitoring locations per tenant. If there are are less than three
common entries, an individual audio-only or audio-video door station can be included for each tenant location.

KB-MV2

Microphone

Camera Lens

Night Vision LED

Speaker

KB-MV3

Open position
for additional
module,
determined by
panel design.

KB-SWM and KB-SWS

with 2 GF-3P, 1 GF-2F

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - WHITE; mounted in bracket; Not Used

3A2 3A1 2A2 2A1 1A2 1A1 3A2 3A1 2A2 2A1 1A2 1A1 INSTALLATION DIAGRAM: KB-MV2 Rear View UP KB-SWM & KB-SWS Rear View Installation: - Mount the KB-SWM and KB-SWS into the GF-2F or GF-3F mounting bracket. - Plug the KB-MV2 / KB-MV3 connector cable into the KB-SWM. If any KB-SWS sub-modules are used...

Page 3 - Each entrance panel must have its own SKK-620 power supply.

1A11A2 2A12A2 3A13A2 KB-MV3 + KB-SWM (door #1) + - SKK-620A KB-3MRD (Top button) PS-2420UL + - 1A1 B1 1A2 B2 2A12A2 3A1 + 3A2 - KB-3MRD (Middle button) PS-2420UL + - 1A1 B1 1A2 B2 2A12A2 3A1 + 3A2 - 1A11A2 2A12A2 3A13A2 KB-MV3 + KB-SWM (door #2) + - SKK-620A Black White WIRING DIAGRAM: Wiring Notes:...

Page 4 - TOLL FREE TECHNICAL SUPPORT:; Operating Temperature:; WARRANTY

Aiphone Communication Systems1700 130th Ave. N.E.Bellevue, WA 98005(425) 455-0510FAX (425) 455-0071 TOLL FREE TECHNICAL SUPPORT: (800) 692-0200 TOLL FREE FAX LINE: (800) 832-3765 E-MAIL: [email protected] KB-MV2 KB-MV3 Instr. 1105PHJS Specifications: Power Source: 6V DC at entrance panel. Use on...