Aiphone IPW-1A - Manual
Aiphone IPW-1A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION & MOUNTING; Installation Instructions:; neither vandal resistant; . Secure the provided mounting bracket and then slide; or by executing “; CommuniCenter SOFTWARE INSTALLATION
- Page 3 – RED and GREEN LEDs next to RS-232 Serial Port; HARDWARE DIAGNOSTICS
- Page 4 – SPECIFCATIONS; WARRANTY; Hardware Specifications:; TOLL FREE TECHNICAL SUPPORT:
- INSTRUCTIONS -
The IPW-1A offers voice-quality Intercom function over standard IP based networks. Designed specifically to integrate
seamlessly into a new or existing LAN / WAN infrastructure, the IPW-1A system is capable of supporting hundreds of
stations. Providing intercom/paging solutions to a large variety of applications including commercial, industrial,
residential, general security, office, and institutional.
IPW-1A
Intercom-Over-IP Adaptor
Pg. 1
1
NAMES & FEATURES
FEATURES:
·
Cost-effective multi-master (PC-based) based design
·
Compatible with IE Series sub stations and AX-DM
·
Scalable to hundreds of stations / locations
·
Works with standard wired and wireless network infrastructure. (LAN/WAN)
·
Digital audio recording and playback capability via included software.
·
Relay output for remote release (N/O or N/C)
IPW-1A
0211
Package Contents:
(1) IPW-1A
(1) PT-1211C
(1) Mounting hardware
(1) Software CD
(1) Install manual
Rear plate
IN0 IN1 NC C NO
PWR
Front plate
NAMES & FUNCTIONS:
1.
Reset switch (reset unit)
2.
RS-232 Serial Port (for firmware recovery)
3.
Green and Red Status Lights
4.
Sub station connector
5.
Door release relay output &
external input.
Door release:
NC = Normally closed contact
NO = Normally open contact
C = Common
External input:
IN0 = call button input (simulates door call in)
IN1 = sensor input (changes icon in CommuniCenter adaptor list)
Gnd = ground
6.
RJ-45 10/100 ethernet jack & connection indicator LED’s (network
connection)
7.
Power input connector
1
2
3
4
5
6
7
IN0 IN1 NO C NC
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION & MOUNTING Installation Instructions: 1. If the IPW-1A adaptor is not on the same LAN or network segment as the PC master station, ensure that the IPW-1A has been pre-programmed with the proper connection settings prior to physical adaptor installation. See the CommuniCenter Opera...
Pg. 3 4 STATION SET-UP DHCP Enabled: · An IP address will automatically be assigned to each IPW-1A with the default ID# as 0 and Location Name left blank. · Right click on each station to open the drop down box, and select Settings . This will open the Hardware Configuration tool. Give each adaptor ...
Device running / normal operation: · During normal operation, the Green LED will remain on while the Red LED will remain off. Pushing the reset button: · Upon pressing the reset button, the Green LED and Red LED will remain on. If the reset button is held for 10 seconds or more, the Green LED will r...
