Agilent N1022A - Manual

2 General Safety Considerations General Safety Considerations This product has been designed and tested in accordance with the standards listed in the Manufacturer’s Declaration of Conformity, and has been supplied in a safe condition. The product documentation contains information and warnings whic...

3 Instrument Markings Instrument Markings The instruction manual symbol. The product is marked with this warning symbol when it is necessary for the user to refer to the instructions in the manual. The laser radiation symbol. This warning symbol is marked on prod-ucts which have a laser output. The ...

4 Using the Probe Adapter Using the Probe Adapter There are a few things to consider when connecting the N1022A Active Probe Adapter to an active probe and the Infiniium DCA. • The dynamic range of the system will be 3.2 V (6.4 Vp-p), which with probe off- set, covers most digital technologies. • Th...

5 Connecting the N1022A Technologies sales office. • If the shipping container is damaged, or the cushioning materials show signs of stress, notify the carrier as well as your Agilent Technologies sales office. Keep the shipping materials for the carrier's inspection. The Agilent office will arrange...

6 Connecting the N1022A panel. Connecting to an Aux Power connector prevents the probe from being automatically calibrated. 3 Connect the probe output to the probe adapter input. The probe tip should not be connected to a device under test at this time. C A U T I O N The probe power cable connector ...

7 Connecting the N1022A Figure 1. Probe Channel Dialog Box 6 Click Close . You can now change the probe tips or probe attenuation. You can also perform a probe calibration. You can access information about probe attenuation and probe calibration in the Infiniium DCA Help system. Using modules with 2...

8 Static-Safe Workstation Static-Safe Workstation Electrostatic discharge (ESD) can damage or destroy electronic components. All work on electronic assemblies should be performed at a static-safe work-station. The following figure shows an example of a static-safe work station using two types of ESD...

9 Reducing ESD Damage Both types, when used together, provide a significant level of ESD protection. Of the two, only the table-mat and wrist-strap combination provides adequate ESD protection when used alone. To ensure user safety, the static-safe accessories must provide at least 1 M Ω of isolatio...

10 Specifications and Regulatory Information Specifications and Regulatory Information This section lists specifications and characteristics and regulatory information of the probe adapter. Specifications The distinction between specifications and characteristics is described as fol-lows: • Specific...

13 Regulatory Information Regulatory Information Electrostatic Discharge Immunity - IEC 61000-4-2: 1995 passes criterion B. According to IEC 61000-4-2: 1995, system measurement may be affected when electrostatic discharges of 2 kV or more are applied to the outer sur-faces of the N1022A probe adapte...

14 Declaration of Conformity Declaration of Conformity

15 Service Service Service for the N1022A Active Probe Adapter is by replacement only. To order a new N1022A, contact your local Agilent Technologies Sales Office. Return the failed probe adapter to your local Agilent service center. If the probe adapter is still under warranty or is covered by an A...

16 Returning the N1022A Returning the N1022A When the probe adapter is returned to an Agilent service office for servicing, it must be adequately packaged and have a complete description of the failure symptoms attached. Please notify the service office before returning your probe adapter for ser-vi...

17 Agilent Technologies Service Offices C A U T I O N Cover electrical connectors to protect sensitive components from electrostatic damage. C A U T I O N Use original packaging or comparable. Instrument damage can result from using packaging materials other than the original materials. Never use st...

Index Index 1 A Accessories , 4 Agilent offices , 17 C CE mark , 3 cleaning , 2 , 4 , 17 CSA mark , 3 D Declaration of Conformity , 14 E EMC requirements , 13 environmental specifications , 10 ESD reducing damage caused by ESD , 9 static-safe work station , 9 I inspecting , 4 ISM1-A , 3 N noise decl...