Agilent 8510C - Manual
Agilent 8510C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – System components
- Page 6 – Millimeter-wave test sets and controllers; Banded waveguide millimeter-wave subsystem; Standard configuration; Sources; Choose an 8360 series synthesized sweeper
- Page 7 – Common options for RF sources; Extended service options are available.; Measurement accessories
- Page 8 – Calibration kits
- Page 9 – Test port cables and adapters; This cable arrangement is for appli-
- Page 10 – Configuration B
- Page 11 – Test configuration accessories
- Page 12 – System upgrades
- Page 13 – Instrument and firmware upgrades; Time domain upgrade
- Page 14 – Test set upgrades; multiple test set operation; Miscellaneous compatibility upgrades; Connector repair kits
- Page 15 – Related Agilent literature; 510 System Solutions Brochure
- Page 16 – Other Asia Pacific Countries:; Agilent Email Updates
The Agilent Technologies 8510C is a modular
family of compatible products. For f lexibility in
specifying a solution that meets your exact needs,
a system is typically ordered as separate line
items. For those who wish ordering convenience,
complete bundled systems are available. Whether
ordering individual components or a bundled sys-
tem, all 8510C network analyzers include one-year,
on-site service. For systems built from individual
components, installation may be ordered sepa-
rately. A PC running BASIC Rev 6.3 or higher
under Windows® (3.1/95/NT) is recommended
for installation and service.
Complete systems
Agilent 8510XF family 110 GHz single sweep
systems
(45 MHz to 110 GHz)
The 8510XF family has two models which are
complete single-connection, single-sweep vector
network analyzer systems that offer S-parameter
measurements over an ultra-broadband frequency
in a 1.0 mm coaxial connector. The broadest fre-
quency model covers 45 MHz to 110 GHz. A lower
frequency model is available covering 45 MHz to
85 GHz. Both systems are designed to facilitate
easy connection to wafer probe hardware while
still preserving excellent RF measurement perform-
ance. In addition, the system can be used to make
coaxial measurements (to interface to a coaxial fix-
ture or a coaxial DUT) using the same millimeter
head configuration.
Agilent E7340A single-connection single-sweep network
analyzer system
(2 to 85 GHz)
The E7340A is a complete system configured with
an 8510C, a 20 GHz and 50 GHz synthesizer, two
85 GHz S-parameter test heads, and a millimeter
test set controller. The instruments are integrated
in the system rack, the system is fully tested, and a
complete system verification is performed prior to
shipment from Agilent. Installation is included at
no additional charge. The E7340A system does not
include calibration kits or test port cable sets.
System components include:
8510C network analyzer
E7342A millimeter subsystem
83621B synthesizer
83651B synthesizer
System rack
Calibration kits and test port cables are not
included and must be ordered separately.
Test set options
•
E7340A-STD
Standard configuration
•
E7340A-005
Add (45 MHz to 2 GHz) low
frequency extension
•
E7340A-006
Add RF pass thru (provides coupled
output of 50 GHz source for additional test
set(s). Additional test set(s) must have
Option 001 installed)
•
E7340A-056
Low frequency extension and RF
pass through
Features
•
8510C-010
Add time domain
Voltage options
•
E7340A-115
110/120 V line voltage operation
•
E7340A-230
220/240 V line voltage operation
Extended service options are available.
Agilent 8510C Network Analyzer Family
45 MHz to 110 GHz
Configuration Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5 System components For f lexibility in specifying a solution that meetsyour exact needs, a system can be ordered as sepa-rate line items. A complete system includes theAgilent 8510C network analyzer, a test set, compat-ible source, and measurement accessories. All major system components (network a...
6 Millimeter-wave test sets and controllers Banded waveguide millimeter-wave subsystem (Components of 85106D)• 85105A millimeter-wave test set controller Requires addition of two 85104A series modulesfor complete waveguide S-parameter test setoperation. Includes IF switching capabilityand 26.5 GHz R...
7 Common options for RF sources Option Description 908 Add rack flange kit 910 Extra operating and service manual 913 Add rack flange and handles kit Extended service options are available. Note: Although general purpose (GP) 8360 seriessynthesized sweepers (836x0B) can be used inplace of the 8510-d...
