Agilent 5203 - Manual
Agilent 5203 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Application Information; Receiver Sections
- Page 6 – Shipping Container
- Page 7 – Board Layout - Hole Pattern; Figure 7. Recommended Decoupling and Termination Circuits.
- Page 8 – Regulatory Compliance; Figure 8. Recommended Board Layout Hole Pattern.
- Page 9 – Immunity; Testing
- Page 10 – Regulatory Compliance Table; Feature
- Page 11 – Ordering Information; Evaluation Kits; m fiber
- Page 17 – Parameter
ATM Multimode Fiber
Transceivers
for SONET OC-3/SDH STM-1 in
Low Cost 1x9 Package Style
Technical Data
Features
• Full Compliance with ATM
Forum UNI SONET OC-3
Multimode Fiber Physical
Layer Specification
• Multisourced 1 x 9 Package
Style with Choice of Duplex
SC or Duplex ST* Receptacle
• Wave Solder and Aqueous
Wash Process Compatibility
• Manufactured in an ISO 9002
Certified Facility
Applications
• Multimode Fiber ATM
Backbone Links
• Multimode Fiber ATM
Wiring Closet to Desktop
Links
• Very Low Cost Multimode
Fiber 800 nm ATM Wiring
Closet to Desktop Links
• ATM 155 Mbps/194 MBd
Encoded Links (available
upon special request)
Description
The HFBR-5200 family of trans-
ceivers from Agilent Technologies
provide the system designer with
products to implement a range of
solutions for multimode fiber
SONET OC-3 (SDH STM-1)
physical layers for ATM and other
services.
These transceivers are all
supplied in the new industry
standard 1x9 SIP package style
with either a duplex SC or a
duplex ST* connector interface.
ATM 2000 m Backbone Links
The HFBR-5205/-5205T are
1300 nm products with optical
performance compliant with the
SONET STS-3c (OC-3) Physical
Layer Interface Specification. This
physical layer is defined in the
ATM Forum User-Network Inter-
face (UNI) Specification Version
3.0. This document references the
ANSI T1E1.2 specification for the
details of the interface for 2000
meter multimode fiber backbone
links.
Selected versions of these
transceivers may be used to
implement the ATM Forum UNI
Physical Layer Interface at the
155 Mbps/194 MBd rate.
The ATM 100 Mbps/125 MBd
Physical Layer interface is best
implemented with the HFBR-5100
family of FDDI Transceivers
which are specified for use in this
4B/5B encoded physical layer per
the FDDI PMD standard.
ATM 500 m Backbone and
Desktop Links
The HFBR-5204/-5204T are 1300
nm products which are similar to
the HFBR-5205/5205T except
that they are intended to provide
a lower cost SONET OC-3 link to
distances up to 500 meters in
62.5/125
µ
m multimode fiber
optic cables.
Very Low Cost ATM 300 m
Desktop Links
The HFBR-5203/-5203T are very
low cost 800 nm alternatives to
the HFBR-5204/-5204T for
SONET OC-3 links to distances up
to 300 meters in 62.5/125
µ
m
multimode fiber optic cables.
Transmitter Sections
The transmitter sections of the
HFBR-5204 and HFBR-5205
series utilize 1300 nm InGaAsP
LEDs and the HFBR-5203 series
HFBR-5203/-5203T
800 nm 300 m
HFBR-5204/-5204T
1300 nm 500 m
HFBR-5205/-5205T
1300 nm 2 km
*ST is a registered trademark of AT&T Lightguide Cable Connectors.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 design complies with themaximum height allowed for theduplex SC connector over theentire length of the package. The optical subassemblies utilizea high volume assembly processtogether with low cost lenselements which result in a costeffective building block. The electrical subassembly con-sists of...
6 Figure 5. Transceiver Relative Optical Power Budgetat Constant BER vs. Signaling Rate. Figure 6. Bit Error Rate vs. Relative Receiver InputOptical Power. illustrates the typical trade-offbetween link BER and thereceivers input optical powerlevel. Transceiver JitterPerformance The Agilent 1300 nm t...
7 NO INTERNAL CONNECTION NO INTERNAL CONNECTION HFBR-520X TOP VIEW V EE RD RD SD V CC V CC TD TD V EE 1 2 3 4 5 6 7 8 9 C1 C2 L1 L2 R2 R3 R1 R4 C5 C3 C4 R9 R10 V CC FILTER AT V CC PINS TRANSCEIVER R5 R7 R6 R8 C6 RD RD SD V CC TD TD TERMINATIONAT PHYDEVICEINPUTS NOTES:THE SPLIT-LOAD TERMINATIONS FOR ...
