AEG W 1030 - Manual

6 OPERATING INSTRUCTIONS 1 Safety The safety standards of AEG electric appliances are in keeping with the recognised rules of technology and the law governing the safety of appliances. Nevertheless as a manufacturer we are committed to famil-iarise you with the following safety instructions: Prior t...

Operating instructions 7 Safety of children • Packaging materials (e.g. sheet and Styrofoam) can be dangerous for children. Danger of asphyxiation! Keep packaging materials at a safe distance from children. • Children are often unable to recognise the dangers involved with electrical appliances. Pro...

Operating instructions 8 2 Disposal Dispose of the packaging! Dispose of washing machine packaging materials properly. All packag-ing materials are environmentally sound and can be safely disposed of, or burned in a refuse incineration plant.The plastic parts can be reused: • The external plastic co...

Operating instructions 9 Description of the Appliance Front View Drawer for Detergent and Conditioner Drawer for detergent andsoftener Control Panel Door with handle Flap in front of the circulation pump Threaded feet(height adjustable) Rating plate(behind door) k Pre wash detergent or in-wash stain...

Operating instructions 10 Control panel Program Selector You define the type of washing cycle using the program selector. Important! Only turn the program selector clockwise! The various positions have the fol-lowing effect: COTTONS/LINEN, EASY-CARES (+button) Program Group For cottons/linen: You on...

Operating instructions 11 • RINSE Separate rinse, e.g. for rinsing hand washed fabrics (spinning in accord-ance with the selected washing type or rinse hold). 3 Rinse hold means: the washing is left in the last rinse water, it is not spun. • CONDITIONER Separate conditioning of wet cotton/linen or e...

Operating instructions 12 Temperature Selector On the temperature selector you can set the temperature for the washing cycle; the temperature is continuously variable from COLD to 95 °C. 2 E Position (Energy Saving): Energy saving program at approx. 67 °C for lightly to normally soiled cotton washin...

Operating instructions 13 Before Washing for the First Time 0 1. Pull the detergent drawer out from the control panel a little. 2. Pour around 1 litre of water into the washing machine via the deter-gent drawer. This will ensure when the washing machine is started that the water container is closed ...

Operating instructions 14 • Mix small and large articles of washing! This improves washing effi- ciency, and the washing is more favourably distributed during the spin cycle. • Fluff washing before placing into the washing machine. • Do not place folded washing into the drum. • Observe tips for prop...

Operating instructions 15 Detergent and conditioner Which detergent and conditioner ? Use only detergents and conditioners which are suitable for use in washing machines. Always observe the manufacturer’s instructions. How much detergent and conditioner ? The required quantity depends upon: • the am...

Operating instructions 16 Performing a Washing Cycle Brief Instructions A washing cycle is performed in the following steps: 0 1. Open the door, load the washing. 2. Close the door. 3. Add detergent/conditioner. 4. Set the correct washing program: – Set the program on the program selector; – Set the...

Operating instructions 17 Loading the Washing 3 For maximum loads see the "Program Tables". For notes on the correct preparation of the washing, see "Washing Types and Care Symbols". 0 1. Sort the washing by type and prepare. 2. Open the door: pull the handle on the door. 3. Load the...

Operating instructions 18 Setting the Washing Program 3 For suitable programs and the right temperature for the relevant type of washing, see "Program Tables". Important! Only turn the program selector clockwise! 0 1. Set the program selector to the desired washing program. 2. Set the temper...

Operating instructions 19 Changing the Spin Speed or Selecting Rinse Hold 0 If desired, reduce the spin speed for the final spin or select rinse hold: – Press the spin speed button or – Press the RINSE HOLD button. If RINSE HOLD is selected, the washing is left in the last rinse water, it is not be ...

Operating instructions 20 Washing Cycle Complete / Removing the Washing The washing program normally ends with the final spin. After a rinse hold: After a rinse hold the water must first be pumped out or the washing spun: 0 1. Release the RINSE HOLD button. 2. Either turn the program selector clockw...

Operating instructions 21 Program Tables Washing Not all possible settings are given in the following, but only those that are useful and meaningful in everyday use. Washing Type, Care Symbol Max. Load (weight dry) 1) 1) A 10 litre bucket contains about 2.5 kg of dry washing (cotton). Program Select...

Operating instructions 22 Washing with a Pre Wash Separate Rinsing Separate Gentle Rinsing / Starching / Conditioning Separate Spinning Type of Washing Max. Load (weight dry) Program Selector Temperature Selector Additional Button Cottons/Linen 5 kg PRE WASH 30 to 95 Easy-Cares 2.5 kg 30 to 60 EASY-...

Operating instructions 23 Cleaning and Caring Control panel Attention! Do not use furniture care products or aggressive cleansers for cleaning control panels and control elements. 0 Wipe control panels with a moist cloth. Use warm water. Detergent drawer The detergent drawer should be cleaned from t...

Operating instructions 24 Washing drum The washing drum is made of rust-free stainless steel. Rusty objects in the washing drum may lead to rust deposits on the drum. Attention! Do not clean the stainless steel drum with acid containing decalcifying agents, abrasives containing chlorine or iron, or ...

Operating instructions 25 What to do when … 3 The somewhat different, in comparison to older wash-ing machines, whistling noise during spinning is due to the modern drive system.A rattling sound on startup – in particular when using for the first time – is caused by the circulation pump and is due t...

Operating instructions 27 If the washing results are not satisfactory If the washing is grey and there are calcium deposits in the drum • Too little detergent was used. • The wrong detergent was used. • Special soiling was not pre-treated. • Program or temperature not set correctly. • When using com...

Operating instructions 28 Perform emergency drain • If the washing machine no longer pumps out the water then an emergency drain must be performed. • If the washing machine is located in a room in which below freezing temperatures might occur, emergency draining must be carried out if danger of free...

Operating instructions 29 When the water is completely drained: 7. Press the end stop firmly back into the emergency drain hose. 8. Push the emergency drain hose back in a little and allow it to snap into the mounting. 9. Put on the flap and close. 3 The ECO valve does not function when the machine ...

Installation and Connection Instructions 30 INSTALLATION AND CONNECTIONINSTRUCTIONS Installation Safety Precautions • Do not tip the washing machine over the front or the left side (seen from the front). Electrical components could become wet! • Check the washing machine for transport damages. You s...

Installation and Connection Instructions 31 Dimensions of the Appliance Front and Side Views Rear View Inlet for Hot Water Inlet for Cold Water

Installation and Connection Instructions 32 Installation of the appliance 3 Washing machines with arched covers are not suited for installation beneath countertops . Transporting the appliance • Do not lay the washing machine on the front or on the left side (seen from the front); otherwise the elec...

Installation and Connection Instructions 33 3 Special spanner H and cover caps E (2 off) and G (1 off) are supplied with the appliance. 0 1. Remove flexible tubing holder A. 2. Remove the two screws B with special spanner H. 3. Remove the four screws C. 4. Detach transportation rail D. 5. Close the ...

Installation and Connection Instructions 34 Installation on a concrete base When installing on a concrete base, for safety reasons it is imperative that steel plates are installed, the washing machine is then installed in these plates. The steel plates are available from customer service under ET-No...

Installation and Connection Instructions 35 Power supply Details on the mains voltage, type of current and the neces-sary fuse protection are to be found on the rating plate. The rating plate is above and behind the door. For permanent electrical con-nection within the electrical circuit, provisions...

Installation and Connection Instructions 36 Water feed A flexible pressure tubing of 1.3 m length is supplied. If a longer feed tubing is needed, a complete VDE-approved tubing set with mounted screw connections, supplied by our customer service, should be used exclusively. – For washing machines wi...

Installation and Connection Instructions 37 Hot and Cold Water Connection Appliances designed for connecting to hot and cold water supplies can be connected up to the hot and cold water taps as per the diagram below. The hose set supplied is approved for use with hot and cold water. Important! The h...

Installation and Connection Instructions 38 Water drain-off The drain-off tubing can be connected either to a siphon or be hanged in a washing or sink basin or in a bathtub. For extension (max. 3 m floor length and up to 80 cm high) only origi-nal tubing may be used. The customer service supplies dr...

Guarantee Conditions/ Service Departments 39 Technical data Height x Width x Depth 85 x 60 x 60 cm Depth with open door 95 cm Height adjustment approx. +10/-5 mm Weight when empty approx. 85 kg Load (depending on the program) max. 5 kg Area of use Household Wash cycle drum speed max. 53 min -1 r.p.m...

Index 42 INDEX C Calcium . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Conditioner . . . . . . . . . . . . 9 , 11 , 15 , 17 , 22 liquid . . . . . . . . . . . . . . . . . . . . . . . . . . 9 , 17 Cotton Mixtures . . . . . . . . . . . . . . . . . . . . . 14Cottons . . . . . . . . . . . . ....

Service 43 SERVICE If a malfunction should occur at the appliance, refer first to the section "What to do when ..." in these user instructions. If you do not find any applicable instructions there, contact your customer service centre. (Addresses and telephone number can be found in the "...