AEG SDS31200S0- User Manual

Page 2 - Visit the webshop at:

FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best fr...

Page 3 - CONTENTS

CONTENTS 4 Safety information 6 Operation 7 First use 7 Daily use 8 Helpful hints and tips 9 Care and cleaning 11 What to do if… 13 Technical data 13 Installation 20 Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and i...

Page 4 - manufacturer is not responsible for damages caused by omission.; Children and vulnerable people safety; children to suffer electric shock or to close themselves into it.; General safety; Keep ventilation openings clear of obstruction.

SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the applia...

Page 6 - Service; by a qualified electrician or competent person.; Environment Protection; OPERATION; Switching on; Insert the plug into the wall socket.; Switching off; The temperature is automatically regulated.; Operation

• Adequate air circulation should be around the appliance, lacking this leads to overheat - ing. To achieve sufficient ventilation follow the instructions relevant to installation. • Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compress...

Page 7 - FIRST USE; Cleaning the interior; DAILY USE; Movable shelves

• the location of the appliance.If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall. In this case the dial must be set to a higher temperature to allow automatic defro...

Page 8 - HELPFUL HINTS AND TIPS; Hints for energy saving

1. lift the shelf with the sliding box up - wards and out of the holders in the door 2. remove the retaining bracket out of the guide under the shelf 3. Reverse the above operation to insert the sliding box at a different height. Ice-cube production This appliance is equipped with one or more trays ...

Page 9 - CARE AND CLEANING; Periodic cleaning

Butter and cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door. Bananas, potatoes, onions and garlic, if not packed, ...

Page 11 - other than those recommended by the manufacturer.; Periods of non-operation; disconnect the appliance from electricity supply; WHAT TO DO IF...; What to do if...

To remove the frost, follow the instructions below:1. Switch off the appliance.2. Remove any stored food, wrap it in several layers of newspaper and put it in a cool place. CAUTION! Do not touch frozen goods with wet hands. Hands can freeze to the goods.3. Leave the door open .In order to speed up t...

Page 13 - Replacing the lamp; TECHNICAL DATA

Problem Possible cause Solution There is no cold air circulation in the appliance. Make sure that there is cold air circulation in the appliance. Replacing the lamp 1. Disconnect the mains plug from the mains socket.2. Remove the screw from the lamp cover.3. Remove the lamp cover (refer to the il - ...

Page 14 - Positioning; climate class indicated on the rating plate of the appliance:; Electrical connection; respond to your domestic power supply.; Door reversibility; Installation

Positioning Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Electrical connection Before plu...

Page 15 - Loosen and remove the lower pin.; Ventilation requirements; The airflow behind the appliance must be suffi; Installing the appliance; Make sure that the mains cable can move freely.

4. Loosen the middle hinge.5. Remove the lower door.6. Loosen and remove the lower pin. On the opposite side:1. Tighten the lower pin.2. Install the lower door.3. Tighten the middle hinge.4. Install the spacer.5. Install the upper door.6. Tighten the upper pin. Ventilation requirements The airflow b...

Page 18 - of the kitchen furniture.; Ha

7. Disconnect the parts (Ha), (Hb), (Hc) and (Hd). 8. Install the part (Ha) on the inner side of the kitchen furniture. 9. Push the part (Hc) on the part (Ha). ca. 50 mm ca. 50 mm 21 mm 90° 90° 21 mm Ha Hc 18 Installation

Page 20 - ENVIRONMENTAL CONCERNS; shop where you purchased the product.; Environmental concerns

13. Press the part (Hd) on the part (Hb). 14. To open the doors do these steps. Use the sliding system previously illus - tratedor open one of the two doors by fitting the small handle supplied as an acces - sory. Do a final check to make sure that:• All screws are tightened.• The sealing strip is a...

AEG SDS31200S0- User Manual

Table of Contents:

Summary

Other AEG Models