AEG S60160TK- User Manual

7 Installation Installation Location The appliance should be set up in a well ventilated, dry room.Energy use and efficient performance of the appliance is affected bythe ambient temperature.The appliance should therefore– not be exposed to direct sunlight;– not be installed next to radiators, cooke...

Detaching the Worktop After the worktop has been removed the appliance can be installedunderneath a continuous worktop.The procedure is as follows: ☞ 1. Unscrew the Philips screws (F) on theright and the left. 2. Lift the worktop slightly, push it about20 mm towards the rear, and lift it offupwards ...

Installation 9 ☞ 1. Detach the worktop. 2. Unscrew the door hinge (A) andscrew it into place on the oppositeside. 3. Refit the worktop. 4. Tilt the appliance slightly towardsthe rear and prop it securely. 5. Unscrew the door hinge screws (K)and remove the hinge pin bracket(1). 6. Unscrew the handle....

Installation 10 Plug Socket The plug socket necessary for connection of your appliance to theelectricity supply should be positioned so that it is possible to pull outthe appliance plug.If your appliance is installed under acontinuous worktop, the plug socketshould be provided as shown.Alternatively...

11 As the colours of the wires in the mains lead of this appliance may notcorrespond with the coloured markings identifying the terminals inyour plug, proceed as follows:1.The wire coloured green and yellow must be connected to the termi-nal marked with the letter “E” or by the earth symbol or colou...

12 Starting Up and Temperature Regulation ☞ 1. Connect the appliance to the mainselectricity supply.When the refrigerator compartmentdoor is opened, the internal lighting isswitched on.The temperature control knob is locat- ed on the right hand side of therefrigerator compartment. Setting “0” means:...

13 Switching Off the Appliance To switch off the appliance, turn the temperature regulator to position"0". If the appliance is not going to be used for an extended period: ☞ 1. Remove all refrigerated packages. 2. Switch off the appliance by turning the thermostat knob to position"0"...

Interior accessories 14 Variable Inner Door The door compartments can be pulled up and removed, and inserted atother positions as needed. Variable Storage Box Some models are equipped with a variable storage box which is fittedunder a door shelf compartment and can be slid sideways.The box can be in...

15 Correct Storage For physical reasons, there are dif-ferent temperature regions in thefridge. The coldest region is on thelowest storage shelf. Warmerregions are the top storage shelf,the vegetable drawer and the stor-age compartments on the door.The arrangement example shows atwhich places in the...

16 Cleaning and Care For hygienic reasons the appliance interior, including interior acces-sories, should be cleaned regularly. Warning! • The appliance must not be connected to the mains during cleaning. Danger of electrical shock. Before cleaning switch the appliance offand remove the plug from th...

17 What to do if ... Correcting Malfunctions A malfunction may be caused by only a minor fault that you can recti-fy yourself using the following instructions. Do not perform any otherwork on the appliance if the following information does not provideassistance in your specific case. Important! Repa...

19 Changing the Light Bulb Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or disconnect from thepower supply.Light bulb data: 220-240 V, max. 15 W ☞ 1. To switch off the appliance, turn the thermostat knob to position "0"....