Page 3 - Contents
3 Contents Important Safety Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance Packaging Information . . . . . . . . . . . . . . . . ....
Page 4 - Important Safety Instructions
4 Important Safety Instructions These warnings are provided in the interests of your safety. Ensureyou fully understand them before installing or using the appliance.Your safety is not paramount importance. If you are unsure aboutthe meaning of these warnings contact the Customer CareDepartment for ...
Page 6 - Disposal; Appliance Packaging Information; Remove transport safeguard
6 Disposal Appliance Packaging Information All materials are environmentally sound! They can be dumped orburned at an incinerating plant without danger!About the materials: The plastics can be recycled and are identified asfollows:>PE< for polyethylene, e.g. the outer covering and the bags in ...
Page 7 - Installation; Installation Location
7 You can remove any remnants of adhesive using white spirit. Remove all adhesive tape and packing pieces from the interior of the appliance. Installation Installation Location The appliance should be set up in a well ventilated, dry room.Energy use is affected by the ambient temperature.The applian...
Page 8 - Rehingeing the door
8 Rehingeing the door The side at which the door opens can be changed from the right side(as supplied) to the left side, if the installation site requires. Warning! When changing the side at which the door opens, the appli- ance may not be connected to the mains. Remove plug from the mains beforehan...
Page 14 - Fitting the plinth; Power supply
Fitting the plinth Important! For the efficient operation of the appliance, it is important that theoriginal ventilation grid is used.• For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth may be fitted without adjustments. The same applies to an opening height...
Page 15 - Electrical Connection
Electrical Connection Any electrical work required to install this appliance should be carriedout by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHEDThe manufacturer declines any liability should these safety mea-sures not be observed. Before switching on, make s...
Page 16 - Description of the appliance; View of the appliance; Prior to Initial Start–Up
Description of the appliance View of the appliance ➀ ➁ ➂ ➃ 16 ➄ ➅ ➆ ➀ Butter/cheese compartment ➁ Sliding shelf ➂ Bottle shelf ➃ Vegetable baskets ➄ Storage shelves ➅ Thermostat ➆ Frozen food storage/freezing food, icemaking. Prior to Initial Start–Up Please clean the appliance interior and all acce...
Page 17 - Starting up and temperature regulation
17 Starting up and temperature regulation Insert the plug of the connection lead into the plug socket with pro-tective earth contact. When the refrigerator compartment door is ope-ned, the internal lighting is switched on.The temperature selector knob is located on the right side of therefrigerator ...
Page 18 - Interior Accessories; Storage shelves/wire trays; Correct storage
Interior Accessories Storage shelves/wire trays Various glass or plastic storage shelves and wire trays are includedwith your appliance - different models have different combinations.You should always slide one of the full size glass storage shelves into the lowest set of guides, above the fruit and...
Page 19 - Freezing and storing frozen food
Freezing and storing frozen food The freezer compartment is for freezing and storing food. Important! • The temperature in the freezer compartment must be –18°C or col- der before freezing food or storing food already frozen. • Do not freeze too large a quantity at any one time (max. 2 kg per 24 hrs...
Page 20 - Preparation of Ice Cubes; Defrosting; The fridge defrosts automatically
Preparation of Ice Cubes Fill the ice cube tray 3/4 full with cold water, place it in the freezer compartment and leave to freeze.To loosen the frozen cubes, either bend the ice cube tray or hold it under running water for a few seconds. Important! Never try to free an ice tray that is frozen to the...
Page 21 - Switching off the appliance; Cleaning and Care
21 Remove frozen food, wrap it in several layers of newspaper and store it, covered, in a cool place.Switch off the appliance and unplug it, or pull the fuse or switch off the circuit breaker.Remove the stopper from the meltwater outlet and place a bowl underneath it to catch the meltwater. Tip: You...
Page 23 - Energy Saving Tips; Correcting Malfunctions
23 Energy Saving Tips • Do not install the appliance near cookers, radiators or other sources of warmth. High ambient temperatures cause longer, more frequent operation of the compressor. • Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance. Nev...
Page 25 - Changing the light bulb
25 Malfunction Unusual noises. Possible Cause Appliance is not level. The appliance is touchingthe wall or other objects. A component, e.g. a pipe,on the rear of the applianceis touching another part ofthe appliance or the wall. Remedy Readjust the feet. Move the applianceslightly. The compressor do...
Page 26 - Customer Care
26 Service & Spare Parts In the event of your appliance requiring service, or if you wish to pur-chase spare parts, contact your local AEG Service Force Centre bytelephoning: 08705 929929 Your call will be automatically routed to the Service Centre coveringyour post code area. In guarantee custo...
Page 27 - Noises during Operation
27 Noises during Operation The following noises are characteristic of refrigeration appliances:• Clicks Whenever the compressor switches on or off, a click can be heard. • Humming As soon as the compressor is in operation, you can hear it humming. • Bubbling/Splashing When refrigerant flows into thi...
