Page 2 - CONTENTS; Contents
Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend ...
Page 3 - SAFETY; General safety
Water drainage 34 ELECTRICAL CONNECTION 35 ENVIRONMENT CONCERNS 36 Packaging materials 36 Ecological hints 36 Subject to change without notice OPERATING INSTRUCTIONS SAFETY INFORMATION Read carefully & keep for future reference. • The safety of Your appliance complies with the industry standards...
Page 5 - PRODUCT DESCRIPTION
• Make sure that children or pets do not climb inside the drum. To prevent children or pets becoming trapped inside the drum the ma - chine incorporates a special feature. To acti - vate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If...
Page 6 - Detergent dispenser drawer; prewash; CONTROL PANEL
Detergent dispenser drawer Compartment for detergent used for prewash . The prewash detergent is added at the beginning of the wash programme. Compartment for powder or liquid detergent used for main wash . Compartment for liquid additives (fabric softener, starch). Compartment for stain remover use...
Page 7 - DISPLAY
3 SPIN reduction button 4 OPTIONS button 5 OK button 6 TIME SAVING button 7 START/PAUSE button 8 DELAY START button 9 Display Symbols: Handwash; Child Lock. DISPLAY 9.1 9.2 9.4 9.5 9.6 9.7 9.8 9.3 9.9 9.1 - Temperature indicator and COLD symbol 9.2 - Spin Speed indicator, RINSE HOLD , NIGHT CYCLE - ...
Page 8 - Err; FIRST USE; Acoustic signals
– After selecting a programme, the duration is displayed in hours and minutes (for ex - ample . The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. – After the programme has started, the time remaining is updated every minute. • Delay start ...
Page 9 - DAILY USE; Load the laundry
This function remains able also when the washing machine is not working. To enable (or disable) this option press simultaneously for about 6 seconds buttons 4 and 5 until the Child Lock symbol appears on (or disappears from) the display. There are two different ways to set this option: • Before pres...
Page 10 - MAX; Turn the programme dial (1) to set the required programme; switch the machine off.; Select the desired TEMPERATURE (Button 2)
2. If required, pour fabric softener into the compartment marked (the amount used must not exceed the MAX mark in the drawer). Close the drawer gently. Turn the programme dial (1) to set the required programme You can choose the right programme for any type of laundry following the descriptions on t...
Page 11 - PREWASH option
Select the spin speed, NIGHT CYCLE or RINSE HOLD option (button 3) When the required programme has been selected, your appliance automatically proposes the maximum spin speed provided for that programme. Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a ...
Page 12 - STAIN option; is not; SENSITIVE option
This option is recommended for heavily soiled laundry. STAIN option Select this option to treat heavily soiled or stained laundry with stain remover (extended main wash with time optimized stain action phase). The relevant symbol will appear on the display. This option is not available with a temper...
Page 13 - Before you start the programme; Altering an option or a running programme; only by resetting it; Interrupting a programme
Select the DELAY START (button 8) Before you start the programme , if you wish to delay the start, press the button repeat - edly, to select the desired delay. The corresponding symbol will appear on the display. The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 ...
Page 14 - Opening the door after the programme has started; attention to the water level and temperature!); At the end of the programme; To empty the water out:
Opening the door after the programme has started When the machine is working and throughout the delay time the door is locked. If, for any reason, you wish to open the door, set firstly the machine to pause by pressing the button 7 . • If the DOOR symbol blinks and after a few minutes disappears, th...
Page 15 - WASHING PROGRAMMES; Washing programmes
WASHING PROGRAMMES Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options Detergent Compartment COTTON 95°- Cold Main wash - Rinses - Long spin at maximum spin speed Max. load 8 kg - Reduced load 4 kg For white and coloured cotton (normally soiled it...
Page 19 - HELPFUL HINTS AND TIPS; Sorting out the laundry; Remove persistent stains before washing.; Removing stains; to treat them prior to washing.
Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options Detergent Compartment COTTON ECONOMY 60° Main wash - Rinses - Long spin at maximum spin speed Max. load 8 kg White and fast coloured cotton . This programme can be selected for slightly or nor - ...
Page 20 - Ball point pen and glue:; Detergents and additives; without; Quantity of detergent to be used
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth. Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will...
Page 21 - CARE AND CLEANING
Degrees of water hardness Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. If the water hardness degree is medium or high we suggest you to add a wa...
Page 24 - Cleaning the water inlet filters
8. Remove foreign bodies and fluff from the filter seat and from the pump im - peller. 9. Check carefully whether the pump im - peller rotates (it rotates jerkily). If it doesn’t rotate, please contact your Serv - ice Centre. 10. Put the cap back on the emergency emptying hose and place the latter b...
Page 26 - WHAT TO DO IF...; yellow
5. place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its cap. The water should drain by gravity into the bowl. When the bowl is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water stops flowing out; 6. clean the pump if ...
Page 27 - What to do if...
Problem Possible cause/Solution The machine does not fill: The water tap is closed. • Open the water tap.The inlet hose is squashed or kinked. • Check the inlet hose connection. The filter in the inlet hose or the inlet valve fil - ter are blocked . • Clean the water inlet filters (see "Cleaning...
Page 29 - TECHNICAL DATA
Problem Possible cause/Solution The machine makes an unusual noise: The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. This new motor en - sures a softer start and more even distribution of the laundry in the drum when spinning, as well as...
Page 30 - CONSUMPTION VALUES; sumption for washing that type of cotton laundry.; INSTALLATION INSTRUCTIONS; INSTALLATION; Unpacking; has to be transported again.
CONSUMPTION VALUES Programme 1) Energy consumption (KWh) 2) Water consumption (li - tre) 2) White Cottons 95 °C 2.5 65 Cottons 60 °C 1.7 63 Cottons 40 °C 1.0 62 Synthetics 40 °C 0.55 51 Delicates 40 °C 0.50 68 Wool/ Handwash 30 °C 0.30 64 1) Refer to the display for the programme time. 2) The consum...
Page 33 - This appliance must be connected to a cold water supply.
Positioning and levelling Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubber coating. Never try to correct any unevenness in the floor by putting pieces of wood, cardboard o...
Page 34 - Water drainage
3. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. 4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance. The inlet hose must not be lengthened. If it is too short a...
Page 35 - ELECTRICAL CONNECTION; Connect the machine to an earthed socket.
This could be done by tying it to the tap with a piece of string or attaching it to the wall. 2. In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. 3. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 ...
Page 36 - out by a Service Centre.; ENVIRONMENT CONCERNS; Packaging materials
WARNING! Should the appliance power supply cable need to be replaced, this must be carried out by a Service Centre. ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate coll...
