AEG LAVAMAT2127- User Manual

Page 2 - Contents; Printed on recycled paper.

Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Tips for environmental protection . . . . . . . . . . . . . . . . ...

Page 4 - General safety; instructions for positioning and connection

Child safety • Children are often not aware of how dangerous electrical appliances can be. When the machine is working, children should be carefullysupervised and not be allowed to play with the appliance - there is arisk that they could become trapped inside. • The packaging components (e.g. plasti...

Page 6 - Front view; • Woollens; Position; Detergent drawer

47 Description of the appliance Front view 46 Control panel A = Mains-on lightB = ON/OFF buttonC = Programme selector dialD = Option buttonsE = Delay start buttonF = START/PAUSE buttonG = Programme progress display Programme selector dial The programme selector determines the type of washing cycle (...

Page 7 - Programme Option buttons; not; Start; KT

49 48 Description of the appliance Programme Option buttons Depending on the programme, different functions can be combined.These must be selected after choosing the desired programme andbefore depressing the START/PAUSE button.When these buttons are pressed, the corresponding pilot lights come on.W...

Page 8 - Opening the door after the programme has started; Programme progress display

Opening the door after the programme has started First set the machine to PAUSE by pressing the START/PAUSE button. The door can be opened when the door locked light has gone out. If the door does not open, this means that the machine is already heat-ing, that the water level is above the bottom edg...

Page 9 - Preparing the wash cycle; Sorting out and preparing the laundry; Detergent dispenser drawer; without any laundry in the machine

Preparing the wash cycle Sorting out and preparing the laundry • Sort out the laundry according to type of fabrics and care labels (see “Types of fabric and care labels”). • Empty pockets. • Remove any metal parts (safety pins, clips, etc.). • To prevent the laundry from getting damaged and forming ...

Page 11 - Detergents and additives; immediately; How to wash

57 Detergents and additives Which detergent and additive? Use only detergents and additives for washing machines. Follow themanufacturer’s instructions. How much detergent? The quantity depends on: • the load: if the manufacturer does not provide any indications on the amount ofdetergent for small l...

Page 13 - At the end of the programme; and then to DRAIN “D” and; Programme chart; Wash programmes

61 At the end of the programme The machine stops automatically. The END light PROGRAM SONU comeson in the programme progress display.The door locked light goes off. If the ANTI-CREASE option SUDA BEKLETME has been selected, thecorresponding light on the programme progress display illuminatesand the ...

Page 14 - Cleaning and maintenance; After each wash; Leave the door ajar to allow air to circulate.; If the machine is not used for a prolonged period:; Periodical cleaning; do not use methylated spirits, solvents or similar products; Refit the drawer after cleaning.; Special programmes

Cleaning and maintenance After each wash At the end of the wash programme, pull the dispenser drawer out a lit-tle to let it dry. Leave the door ajar to allow air to circulate. If the machine is not used for a prolonged period: Close the water tap and unplug the appliance. Periodical cleaning Exteri...

Page 15 - Door seal

Emergency emptying out If the water is not discharged (pump is blocked, filter or drain pipe areclogged), proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; • if necessary, wait until the water has cooled; • place a bowl on the floor; • put...

Page 16 - Something not working?; Troubleshooting; problem with the water supply

67 66 Something not working? If during the spin cycle the machine makes an unusualwhistling noise, different from the noise made by tradi-tional washing machines, this is due to a new type ofmotor. If water is not visible in the drum, this is dueto the modern technology of new washingmachines that u...

Page 18 - Technical data; This appliance complies with the following EC directives:; Unsatisfactory washing results; If the laundry looks grey and lime scale is found in the drum

Technical data Height x Width x Depth 84x60x50 cm Depth with door opened 93 cm Height adjustment ± 13 mm approx. Net weight 70 kg approx. Load (depending on programme) 6.5 kg max. Use domesticDrum speed during washing max. 55 rpm Drum speed during spinning 1200/900/700/500 rpm Water pressure 50-800 ...

Page 19 - Instructions for installation and electrical connection; Safety instructions for the installer; Service; When can a service visit be charged during the guarantee period?

Instructions for installation and electrical connection Safety instructions for the installer • This appliance is heavy, care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer. • All internal packing must...

Page 20 - Installation; Unpacking; Dimensions of the appliance; Front view and side view

Installation Unpacking All transit bolts and packing must be removed before using the appli-ance. Using a spanner, unscrew and remove therear right-hand bolt and lay the machine onits back, taking care not to squash the hoses.This can be avoided by placing one of thecorner packing pieces between the...

Page 21 - In a sink drain pipe branch.; Positioning

Water inlet Connect the waterinlet hose to aseparate tap witha 3/4" thread.The other end ofthe inlet hosewhich connects tothe machine can beturned in anydirection. Simply loosen the fitting, rotate the hose and retighten thefitting, making sure there are no water leaks.The inlet hose must not be...

Page 22 - Electrical connection; Connect the machine to an earthed socket.; Permanent connection; The power supply cable must be easily accessible after

Electrical connection This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply.Check that your domestic electrical installation can take the maximumload required (2.2 kW), also taking into account any other appliances inuse. Connect the machine to an earthed socket. The manufac...

Page 23 - GARANT

MONTAJ ANINDA YETK I L I SERV I S TARAFINDAN DOLDURULACAKTIR. C I HAZA A I T B I LG I LER MÜ Ç TER I N I N C I NS I : ........................................................... ADI,SOYADI : ................................................... MODEL : ....................................................

AEG LAVAMAT2127- User Manual

Table of Contents:

Summary

Other AEG Models