Page 2 - General information and tips
CONTENTS 4 SAFETY INFORMATION5 TECHNICAL INFORMATION7 PRODUCT DESCRIPTION7 ACCESSORIES8 CONTROL PANEL 13 PROGRAMMES17 BEFORE FIRST USE17 USING THE APPLIANCE17 LOADING THE LAUNDRY17 FILLING THE DETERGENT AND ADDITIVES19 SETTING AND STARTING A PROGRAMME20 AT THE END OF THE PROGRAMME21 HELPFUL HINTS AN...
Page 3 - We recommend the use of original spare parts.
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative technologies that helpmake life simpler – features you might not find on ordinary appliances. Please spenda few minutes reading to get the very best from ...
Page 4 - SAFETY INFORMATION
SAFETY INFORMATION Before the installation and use, read thismanual carefully:• For your safety and the safety of your property • To help the environment• For the correct operation of the appli- ance. Always keep these instructions with theappliance also if you move or give it to adifferent person.T...
Page 5 - TECHNICAL INFORMATION
• Do not install and connect a damaged appliance. • Make sure to remove all packaging and transport bolts. • Make sure that the mains plug is dis- connected from the mains socket dur-ing installation. • Only a qualified person must do the electrical installation, the plumbing andthe installation of ...
Page 7 - Spanner
PRODUCT DESCRIPTION 1 2 3 8 9 5 6 7 4 10 11 12 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump 7 Feet for the appliance level 8 Water drain hose 9 Water inlet valve 10 Mains cable 11 Transit bolts 12 Feet for the appliance level ACCESSORIES 1 2 3 4 1 Spanner...
Page 8 - CONTROL PANEL; AUTO OFF BUTTON
CONTROL PANEL 1 2 3 4 5 6 7 8 9 10 1 On/Off button (Auto Off) 2 Programme knob 3 Display 4 Start Pause button 5 Delay start button 6 Time saving button 7 Extra rinse button 8 Stains/Prewash button: Stain Prewash 9 Spin button 10 Temperature button AUTO OFF BUTTON 1 Press this button to activate or d...
Page 9 - The phase symbols
PROGRAMME KNOB 2 Turn this knob to set a programme. Therelated programme indicator comes on. DISPLAY 3 A H J K L C D E F G B I The display shows: A The temperature of the set programme Cold water B The spin speed of the set programme No Spin symbol 1) Rinse Hold symbol 1) Only available for Spin/Dra...
Page 11 - DELAY START BUTTON; STAIN; SPIN BUTTON
The value shows the total number of the rinses. The indicator bar is fully filled when you set to the maximumnumber of rinses. L The Stain symbol comes on when you activate the function. The Prewash symbol comes on when you activate the func-tion. The indicator bar is not fully filled when you set o...
Page 12 - activate
ACOUSTIC SIGNALS FUNCTION You can hear the acoustic signals when:• You activate the appliance.• You deactivate the appliance.• You press the buttons.• The programme is completed.• The appliance has a malfunction.To deactivate/activate the acoustic sig- nals, press button 8 and button 7 at the same t...
Page 13 - PROGRAMMES; TIME SAVE
PROGRAMMES ProgrammeTemperature Type of loadMax. weight of load Cycle descrip-tion Functions Cotton 95° - Cold White and colouredcotton with normal soil.max. load 9 kg WashRinsesLong spin SPIN REDUC-TIONRINSE HOLDPREWASH 1) EXTRA RINSESTAIN 2) TIME SAVE 3) Extra Silent 95° - Cold White and colouredc...
Page 15 - STEAM PROGRAMMES; Steam Refresh; CONSUMPTION VALUES
5) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with the laundry. To select the DRAIN programme only, set the functionNO SPIN. 6) Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs delicate rinses and a...
Page 17 - Press button; LOADING THE LAUNDRY; Open the appliance door.; FILLING THE DETERGENT AND ADDITIVES
BEFORE FIRST USE 1. To activate the drain system, put 2 li-tre of water in the main wash com-partment of the detergent dispenser. 2. Put a small quantity of detergent inthe main wash compartment of the detergent dispenser. Set and start aprogramme for cotton at the highesttemperature without laundry...
Page 18 - This is the maximum level for the quantity of liquid additives.; Check the position of the flap
The detergent compartment for the prewash phase and the soakprogramme.Add the detergent for prewash and soak before the start of theprogramme. The detergent compartment for the washing phase.If you use a liquid detergent, put it immediately before you startthe programme. Liquid additives compartment...
Page 19 - SETTING AND STARTING A PROGRAMME; INTERRUPT A PROGRAMME
4. To use liquid detergent, turn the flapdown. With the flap in the positionDOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed inthe flap. – Do not set the prewash phase.– Do not set the delay start func- tion. 5. Measure out the dete...
Page 20 - Steam; CANCEL THE DELAY START; To open the appliance door:; AT THE END OF THE PROGRAMME
nutes or hours. The related symbolscomes on. 2. Press button 4 , the appliance starts the countdown of the delay start.When the countdown is completed,the programme starts automatically. Before you press button 4 to start the appliance, you can cancelor change the set of the delaystart.You cannot se...
Page 21 - HELPFUL HINTS AND TIPS; THE LAUNDRY LOAD; soft
HELPFUL HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. • Some coloured items can discolour with the first wash. We recomm...
Page 22 - medium
Level Type Water hardness °dH °T.H. mmol/l Clarke 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 22 www.aeg.com
Page 23 - CARE AND CLEANING; DESCALING; gent with biological properties.; DOOR SEAL; • Clean the drum with special product for
CARE AND CLEANING WARNING! Disconnect the appliance from the mainssupply before you clean it. DESCALING The water we use contains limescale. If itbecomes necessary, use a water softenerto remove limescales.Use a special product made for washingmachines. Obey the instructions that youfind on the pack...
Page 24 - DETERGENT DISPENSER; To clean the dispenser:; Pull the dispenser out.; DRAIN PUMP; • The display shows an alarm code be-
DETERGENT DISPENSER To clean the dispenser: 1 2 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquid ad-ditive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the recess. DRAIN PUMP Regularly exami...
Page 25 - To clean the drain pump:; Open the drain pump door.
To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess ofthe drain pump to collect the waterthat flows out. 4. Press the two levers and pull forwardthe drainage duct to let the waterflow out. 1 2 5. When the container is full of w...
Page 26 - • The indicator of button; To clean the water inlet filters:; EMERGENCY DRAIN
1 2 9. Clean the filter under the water tapand put it back in the pump into thespecial guides. 10. Make sure that you tighten correctlythe filter to prevent leakages. 11. Put the flap back and close the drainpump door. THE INLET HOSE FILTER AND THE VALVE FILTER It could be necessary to clean the fil...
Page 27 - FROST PRECAUTIONS; Remove the water inlet hose
Put the drainage duct back and close thedrain pump flap.When you drain the water with the emer-gency drain procedure, you must activateagain the drain system: 1. Put 2 litres of water in the main washcompartment of the detergent dis-penser. 2. Start the programme to drain the wa-ter. FROST PRECAUTIO...
Page 28 - TROUBLESHOOTING; - The appliance does not fill with; Problem; The water tap is closed.
TROUBLESHOOTING The start of the appliance does not occuror it stops during operation.First try to find a solution to the problem(refer to the table). If not, contact the serv-ice centre. With some problems, the acousticsignals operate and the display showsan alarm code: • - The appliance does not f...
Page 30 - Too much laundry load.
Problem Possible cause Possible solution The appliance fillswith water anddrain immediately. The end of the drainhose is too low. Make sure that the drain hose isin the correct position. The washing re-sults are not satis-factory. The detergent you usedwas not sufficient or cor-rect. Increase the de...
Page 31 - INSTALLATION; UNPACKING; Remove the cardboard top.
INSTALLATION FIXING PLATE KIT (405517114) Available from your authorized dealer.If you install the appliance on a plinth, se-cure the appliance in the fixing plates. Follow the instructions supplied with thekit. UNPACKING 1. Use the gloves. Remove the externalfilm. If necessary, use a cutter. 2. Rem...
Page 33 - Pull out the plastic spacers.; POSITIONING AND LEVELLING; air circulation below the appliance.
10. Remove the three bolts. Use the keysupplied with the appliance. 11. Pull out the plastic spacers. 12. Put the plastic caps in the holes. Youcan find these caps in the user man-ual bag. WARNING! Remove all the packaging and thetransit bolts before you install theappliance. We recommend that you k...
Page 34 - • The appliance must be level and stable.; THE INLET HOSE; • Connect the hose to the appliance.
• The appliance must be level and stable. CAUTION! Do not put cardboard, wood orequivalent materials below theappliance feet to adjust the level. THE INLET HOSE 20 O 20 O 20 O 45 O 45 O 45 O • Connect the hose to the appliance. Turn the inlet hose only left or right.Loose the ring nut to set it in t...
Page 35 - WATER DRAINAGE; With the plastic hose guide.
Water-stop device A The inlet hose has a water stop device.This device prevents water leaks in thehose because of its natural ageing. Thered sector in the window «A» shows thisfault .If this occur, close the water tap and con-tact the service centre to replace thehose. WATER DRAINAGE There are diffe...
Page 36 - Without the plastic hose guide.; • Directly to a built-in drain pipe in the
Without the plastic hose guide. • To a sink spigot. Refer to the illustration. Put the drainhose in the spigot and tighten it with aclip. Make sure that the drain hosemakes a loop to prevent that remainingparticles go in the appliance from thesink. • Directly to a built-in drain pipe in the room wal...
