AEG L79495OKO- User Manual

4. CONTROL PANEL 4.1 Control panel description Temp. Essorage Taches Départ Différé Départ/Pause Rinçage Plus Gain de Temps Blanc/Couleurs + Prélavage Repassage Facile Extra Silence Synthétiques Délicats Marche/Arrêt Duvet Laine/ Soie Essorage/ Vidange Rinçage Jeans Super Eco 30° 20 Min.- 3 Kg Coton...

B Spin area: Spin speed indicator No Spin indicator 1) Rinse Hold indicator 1) Only available for Spin/Drain programme. C Display indicators: Washing phase Rinses phase Spin phase Child safety lock Door lockedYou cannot open the appliance door when the symbol is on.You can open the door only when th...

Programme Essorage Taches 1) Rinçage Plus 2) Gain de Temps 3) Départ Différé Laine/Soie ■ ■ ■ Duvet ■ ■ Essorage/Vidange ■ ■ ■ Rinçage ■ ■ ■ ■ Jeans ■ ■ ■ ■ 20 min.- 3 kg ■ ■ Super Eco ■ ■ ■ ■ Coton Eco ■ ■ ■ ■ ■ 4) ■ 1) The Stain option is not available with a temperature lower than 40 °C. 2) If yo...

6. CONSUMPTION VALUES Stated values are obtained in laboratory conditions with relevant stand- ards. Different causes can change the data: the quantity and type of laundry and ambient temperature. Water pressure, the supply voltage and the temperature of inlet water may also affect the washing pro- ...

Programmes Load (kg) Energy con- sumption(kWh) Water con-sumption(litre) Approxi-mate pro-gramme du-ration (mi-nutes) Remainingmoisture(%) 1) Standard 40°C cot-ton 4.5 0,347 40 199 52 1) At the end of spin phase. 2) Not available for some models. Off Mode (W) Left On Mode (W) 0.48 0.48 The informati...

8.4 Gain de Temps With this option you can decrease the programme duration.• Press this button one time to set 'Shortened duration' for items with daily soil. • Press this button two times to set 'Extra Quick' for slightly soiled items only. Some programmes accept only one of the two options. 8.5 Ri...

10.15 AUTO Stand-by option The AUTO Stand-by function automatically deactivates the appliance to decrease the energy consumption when:• You do not use the appliance for 5 minutes before you press Départ/ Pause button. Press the button Marche/Arrêt to activate the appliance again. • After 5 minutes f...

programme temperature and the level of soil. • If your appliance does not have the detergent dispenser with the flap device, add the liquid detergents with a dosing ball (supplied by the detergent's manufacturer). 11.4 Ecological hints • Always start a washing programme with the maximum load of laun...

13. TROUBLESHOOTING WARNING! Refer to Safety chapters. 13.1 Introduction The appliance does not start or it stops during operation.First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. With some problems, the acoustic signal...

Problem Possible solution The washing results arenot satisfactory. • Increase the detergent quantity or use a different deter- gent. • Use special products to remove the stubborn stains before you wash the laundry. • Make sure that you set the correct temperature.• Decrease the laundry load. You can...