AEG L73481FL- User Manual

Page 2 - CUSTOMER CARE AND SERVICE

CONTENTS 1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. PRODUCT DESCRIPTION . ....

Page 4 - SAFETY INSTRUCTIONS; Installation

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly quali-fied persons in order to avoid a hazard. • The operating water pressure (minimum and maxi- mum) must be between 0,5 bar (0,05 MPa) and 8 bar(0,8 MPa) • The ventilation openings in the base ...

Page 6 - PRODUCT DESCRIPTION; Fixing plate kit; CONTROL PANEL

3. PRODUCT DESCRIPTION 1 2 3 5 6 7 4 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump filter 7 Feet for the appliance level 3.1 Fixing plate kit (4055171146) Use this special accessory, when you in-stall the appliance on a plinth.It prevents the movements of ...

Page 7 - Display; PROGRAMMES

4.1 Display A B C D A) The temperature area:– : Temperature indicator – : Cold water indicator. B) The spin area:– : the Spin speed indicator – : the No Spin indicator 1) – : the Rinse Hold indicator. C) The display indicators:– : the washing phase – : the rinses phase – : the spin phase – : the chi...

Page 10 - CONSUMPTION VALUES

6. CONSUMPTION VALUES At programme start the display shows the duration programme for the max-imum load capacity.During the washing phase the programme duration is automatically calcula-ted and can greatly be reduced if the laundry load is lower than the maxi-mum load capacity (e.g. Cotton 60°C, max...

Page 11 - OPTIONS; Additional spin options:; Child Lock; Permanent extra rinse

7. OPTIONS 7.1 Temperature (Temp.) Set this option to change the defaulttemperature.Indicator = cold water. The indicator of the set temperaturecomes on. 7.2 Spin (Centrif.) With this option you can decrease thedefault spin speed.The display shows the indicator of theset speed. Additional spin optio...

Page 12 - Acoustic signals; BEFORE FIRST USE; Loading the laundry

at the same time until the indicator Ex-tra Aclarado/Enxag. comes on/goes off . 7.9 Acoustic signals The acoustic signals operate when:• You activate the appliance.• You deactivate the appliance.• You press the buttons. • The programme is completed.• The appliance has a malfunction.To deactivate/act...

Page 13 - Using detergent and additives; Liquid or powder detergent

9.2 Using detergent and additives • Measure out the detergent and the fabric conditioner. • Carefully close the detergent drawer. Detergent compartment for prewash phase. Detergent compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Flap for powder or liquid...

Page 16 - HELPFUL HINTS AND TIPS; The laundry load

Press the button On/Off to activatethe appliance again. • After 5 minutes from the end of the washing programmePress the button On/Off to activatethe appliance again. The display shows the end of the lastset programme.Turn the programme knob to set anew cycle. 10. HELPFUL HINTS AND TIPS 10.1 The lau...

Page 17 - CARE AND CLEANING; External cleaning

chines. In areas where the water hard-ness is soft it is not necessary to use awater softener.To know the water hardness in your area,contact your local water authority. Use the correct quantity of the watersoftener. Obey the instructions that youfind on the packaging of the product. 11. CARE AND CL...

Page 21 - TROUBLESHOOTING; Problem

12. TROUBLESHOOTING The start of the appliance does not oc-cur or it stops during operation.First try to find a solution to the problem(refer to the table). If not, contact theservice centre. With some problems, the acousticsignals operate and the display showsan alarm code: • - The appliance does n...

Page 23 - TECHNICAL DATA; ENVIRONMENT CONCERNS

Problem Possible solution Make sure that you set the correct temperature. Decrease the laundry load. After the check, activate the appliance.The programme continues from thepoint of interruption.If the problem occurs again, contact theService. If the display shows other alarm codes.Deactivate and ac...

Table of Contents:

Summary

Other AEG Models