Page 3 - Contents
Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Tips for environmental protection . . . . . . . . . . . . . . . ...
Page 5 - Safety instructions; General safety; instructions for positioning and connection
Safety instructions The safety of AEG appliances complies with the industry standards andwith legal requirements on the safety of appliances. However, as man-ufacturers, we feel it is our duty to provide the following safety notes. General safety • Repairs to the machine must be carried out only by ...
Page 7 - Disposal; Packaging materials; Tips for environmental protection
Disposal Packaging materials The materials marked with the symbol are recyclable. >PE< =polyethylene >PS< =polystyrene >PP< =polypropylene This means that they can be recycled by disposing of them properly inappropriate collection containers. Machine Use authorised disposal sites f...
Page 8 - Main features of your washing machine
Main features of your washing machine • Programme and temperature setting using the programme selector. • Stain programme for effectively treating stained washing. • Energy saving programme for normally soiled cotton items. • Speed for the final spin can be reduced to 1,200, 900, 700 or 400 rpm. • R...
Page 9 - Description of the appliance; Front view
Description of the appliance Front view 9 L 72786 VT LAVAMAT 12001000 900700 400 PRELAVADO LAVADO ACLARADOS ACLARADO ADICIONAL CENTRIFUGADO FIN AGUA EN LA CUBA LAVADO RAPIDO MANCHAS REMOJO ARRANQUE RETARDADO MARCHA/PAUSA PRE- LAVADO PUERTA SOBRE- DOSIFICACION TIEMPO RESTANTE 95 40 40 40 40 40 50 30 ...
Page 10 - • Woollens; Economia; corresponds to the ENERGY SAVING programme at; B C
10 Control panel A = Option buttonsB = Spin speed buttonC = DisplayD = Delay start buttonE = START/PAUSE buttonF = Programme progress displayG = Programme selector dial Programme selector dial The programme selector determines the type of washing cycle (e.g. waterlevel, drum movement, number of rins...
Page 11 - This button has three functions:
11 Description of the appliance Position FACIL DE PLANCHAR at 40°C = Easy to iron. In this position the laundry is gently washed and spun to avoid anycreasing. In this way ironing is easier. Position FRIO = cold wash START/PAUSE button (MARCHA/PAUSA) This button has three functions: a) Start After h...
Page 12 - Programme Option buttons; selectable for wool or pro-
12 Programme Option buttons Depending on the programme, different functions can be combined.These must be selected after choosing the desired programme andbefore depressing the START/PAUSE button.When these buttons are pressed, the corresponding pilot lights come on.When they are pressed again, the ...
Page 13 - Duration of the selected programme (in minutes)
SPIN SPEED Press this button to reduce the maximum speed of the finalspeed proposed by the machine for the selected programmeor to select option AGUA EN LA CUBA (RINSE HOLD).The maximum spin speed for cotton is 1200 rpm, forsynthetics and wool 900 rpm and for delicates 700 rpm. RINSE HOLD (AGUA EN L...
Page 14 - Programme progress display
Programme progress display By selecting the wash programme, the pilot lights corre-sponding to the various phases making up the pro-gramme come on.After the machine has started, only the runningphase pilot light stays on. When the programme hasfinished, the END pilot light FIN comes on. When the pro...
Page 15 - not; Opening the door after the programme has started
Cancelling a programme To cancel a programme which is running, turn the programme selectordial to the RESET position ANULACION. Warning! After a programme which ends with water in the drum (RINSE HOLD-AGUA EN LA CUBA option), turn the selector dial first toANULACION and then to the DRAIN programme “...
Page 16 - Detergent dispenser drawer; The quantity must not exceed the “MAX” mark in the drawer.; Before the first wash; without any laundry in the machine
Detergent dispenser drawer Compartment for prewash or soak detergent and stain remover. The prewashor soak detergent is added at the beginning of the wash programme. Thestain remover is added during the STAIN-Action phase in the main wash. Compartment for powder or liquid detergent used for main was...
Page 17 - Preparing the wash cycle; Sorting out and preparing the laundry
Preparing the wash cycle Sorting out and preparing the laundry • Sort out the laundry according to type of fabrics and care labels (see “Types of fabric and care labels”). • Empty pockets. • Remove any metal parts (safety pins, clips, etc.). • To prevent the laundry from getting damaged and forming ...
Page 18 - Cotton
Weight of laundry Types of fabric and care labels The labels on garments help you to select the most suitable wash pro-gramme. The laundry should be sorted out according to the type of fab-ric and the instructions indicated on care labels.Temperatures indicated on labels are always maximum temperatu...
Page 20 - Detergents and additives; Which detergent and additive?; The quantity depends on:; Liquid detergent; immediately; before starting the programme, or; Adding a water softener (descaling product)
20 Detergents and additives Which detergent and additive? Use only detergents and additives for washing machines. Follow themanufacturer’s instructions. How much detergent? The quantity depends on: • the load: if the manufacturer does not provide any indications on the amount ofdetergent for small l...
Page 21 - How to wash; Load the laundry; Pour the fabric softener into compartment; Select the desired wash programme
21 How to wash Load the laundry Open the door. Place the laundry in the drum, one item at a time. Distribute laundry asevenly as possible. Close the door. Add detergent and additives Pull the drawerout till it stops. Pour the mainwash detergentinto compart-ment . If you wish toperform a pre-wash, a ...
Page 22 - Select the desired options
22 How to wash Select the desired options depending on the degree of soil of the laundry. The corre-sponding light comes on. Select the spin speed or RINSE HOLD option (AUGUA EN LA CUBA) It is possible to select a lower spin speed by means ofthe relevant button; the light corresponding to theselecte...
Page 23 - before starting the machine; Starting the programme; If the delay start option has been selected; , the machine starts its; • Load other laundry:
Selection of the EXTRA RINSE option Press simultaneously the buttons PRELAVADO and LAVADO RAPIDOfor about 2 seconds: the light ACLARADO ADICIONAL comes on in theprogramme progress display. This function stays permanently on. To remove it press the same but-tons again until the light ACLARADO ADICION...
Page 24 - This light could come on also when the drain filter is blocked.
24 Programme progress display By selecting the wash programme, the pilot lights corre-sponding to the various phases making up the programmecome on. After the machine has started, only the runningphase pilot light stays on. Display The time to the end of the programme decreases minute by minute anda...
Page 25 - Programme chart; Wash programmes
25 Programme chart Wash programmes In compliance with EC directive 92/75, the consumption figures indicated on theenergy label refer to the 60°C wash programme for cotton with a load of 5 kg. * The consumption data shown on this chart is to be considered purely indica- tive, as it may vary depending...
Page 26 - Special programmes
26 Programme chart Special programmes * The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry,on the inlet water temperature and on the ambient temperature. It refersto a load of 5 kg for cotton items. Programme D...
Page 27 - Cleaning and maintenance; After each wash; Leave the door ajar to allow air to circulate.; If the machine is not used for a prolonged period:; Periodical cleaning; do not use methylated spirits, solvents or similar products; Refit the drawer after cleaning.
27 Cleaning and maintenance After each wash At the end of the wash programme, pull the dispenser drawer out a lit-tle to let it dry. Leave the door ajar to allow air to circulate. If the machine is not used for a prolonged period: Close the water tap and unplug the appliance. Periodical cleaning Ext...
Page 28 - Door seal; Turn off the water tap.
28 Cleaning and maintenance Door seal Check from time to time the door seal andeliminate eventual possible objects that couldbe trapped in the fold. Drain filter The drain filter collects threads and small objects inadvertently left inthe laundry. Check regularly that the filter is clean. Open the d...
Page 30 - Something not working?; Troubleshooting; problem with the water supply (phase light ACLARADO ADI-
Something not working? If during the spin cycle the machine makes an unusualwhistling noise, different from the noise made by tradi-tional washing machines, this is due to a new type ofmotor. If water is not visible in the drum, this is dueto the modern technology of new washingmachines that use les...
Page 33 - Unsatisfactory washing results; If the laundry looks grey and lime scale is found in the drum
Unsatisfactory washing results If the laundry looks grey and lime scale is found in the drum • Too little detergent has been used. • An unsuitable detergent has been used. • Stubborn stains have not been treated prior to washing. • The programme/temperature has not been correctly selected. If grey s...
Page 34 - Technical data; This appliance complies with the following EC directives:
Technical data Height x Width x Depth 83.5x59.5x57 cm Depth with door opened 114.5 cm Height adjustment ± 13 mm approx. Net weight 79.5 kg approx. Load (depending on programme) 6 kg max. Use domesticDrum speed during washing max. 55 rpm Drum speed during spinning 1200/1000/900/700/400 rpm Water pres...
Page 35 - Service; The symptoms of the fault; When can a service visit be charged during the guarantee period?
Service In the section “Something not working?” some problems that can besolved by yourself are listed. Read this section in the event of problems.If you are not able to find a solution, contact the Service centre.(Addresses and telephone numbers are given on the enclosed leaflet).In all cases, expl...
Page 36 - Instructions for installation and electrical connection; Safety instructions for the installer
Instructions for installation and electrical connection Safety instructions for the installer • This appliance is heavy, care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer. • All internal packing must...
Page 37 - Dimensions of the appliance; Front view and side view
Dimensions of the appliance Front view and side view Rear view 37 595 835 10 85 L 72786 VT LAVAMAT 12001000 900700 400 PRELAVADO LAVADO ACLARADOS ACLARADO ADICIONAL CENTRIFUGADO FIN AGUA EN LA CUBA LAVADO RAPIDO MANCHAS REMOJO ARRANQUE RETARDADO MARCHA/PAUSA PRE- LAVADO PUERTA SOBRE- DOSIFICACION TI...
Page 38 - Installation; Unpacking
Installation Unpacking All transit bolts and packing must be removed before using the appli-ance. Using a spanner, unscrew and remove therear right-hand bolt and lay the machine onits back, taking care not to squash the hoses.This can be avoided by placing one of thecorner packing pieces between the...
Page 39 - Positioning; wood, cardboard or similar materials under the machine.; Levelling
Positioning Install the machine on a flat hard floor.Make sure that air circulation around the machine is not impeded bycarpets, rugs etc.• Before placing it on small tiles, apply a rubber coating.• Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar mate...
Page 40 - Water drainage; In this case, make sure the end; In a sink drain pipe branch.; This branch must be above the trap so that; ventilated; Electrical connection; Connect the machine to an earthed socket.
Water drainage The end of the drain hose can be positionedin three ways: Hooked over the edge of a sink using theplastic hose guide supplied with themachine. In this case, make sure the end cannot come unhooked when the machineis emptying.This could be done by tying it to the tapwith a piece of stri...
Page 41 - Permanent connection; The power supply cable must be easily accessible after
Permanent connection In the case of a permanent connection it is necessary that you install adouble pole switch between the appliance and the electricity supply(mains), with a minimum gap of 3 mm between the switch contacts andof a type suitable for the required load in compliance with the currentel...
Page 42 - Door reversal
42 Door reversal The opening direction of the outer door on this machine can be rever-sed. To carry out this operation, proceed as follows: Disengage the end of thecatch (1) from the doorand turn it 90° toremove it from its seat(Fig. A).Using a screwdriver, turnplastic plug (2) 90° toremove it from ...
Page 43 - Fitting a door panel; The dimensions of the panel must be as follows:
Check that the door is aligned with the appliance. To do this, loosenscrew (9 - Fig. B) by a couple of turns and re-tighten when alignmentis correct.Fit the flexible end of the door catch (1 - Fig. B) into the locationprovided in the door. Fitting a door panel The door of this machine has mouldings ...
