Page 2 - spend a few minutes reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.
CONTENTS 1. SAFETY INFORMATION............................................................................................. 3 2. SAFETY INSTRUCTIONS.............................................................................................5 3. PRODUCT DESCRIPTION......................................
Page 5 - SAFETY INSTRUCTIONS; Installation
removers should be washed separately with an extra amount of detergent before being dried in the washer dryer. • Do not use the appliance if items have been soiled with industrial chemicals. • Do not dry unwashed items in the wash dryer. • Items such as foam rubber (latex foam), shower caps, waterpr...
Page 7 - PRODUCT DESCRIPTION; Appliance overview
• Remove the door catch to prevent children or pets from becoming trapped in the drum. • Dispose of the appliance in accordance with local requirements for the disposal of Waste Electrical and Electronic Equipment (WEEE). 3. PRODUCT DESCRIPTION 3.1 Appliance overview 7 8 9 10 1 2 3 4 5 6 1 Detergent...
Page 8 - CONTROL PANEL; Control panel description
3.3 How to activate the child safety device This device prevents children or pets from being closed in the drum.Turn the device clockwise, until the groove is horizontal. You cannot close the door. To close the door, turn the device anticlockwise until the groove is vertical. 3.4 Installation on sus...
Page 9 - Display
4.2 Display The display shows the following information: Duration of the set programme When you set a programme, the display shows the duration in hours andminutes (for example 2.05 ). The duration is calculated automatically on the maximum load for eachtype of fabric.After the programme has started...
Page 10 - Phase indicators; PROGRAMMES; Programme Chart
Child safety lock This symbol comes on when you activate the child lock function. 4.3 Phase indicators A B C After you have pressed the button Start/Pause,the Washing ( A ) indicator comes on. The appliance is operating.When you set a drying programme, the Drying( B ) indicator illuminates and stays...
Page 12 - Programmes for timed drying
Programme Spin Stains 1) Time Save 2) ExtraRinse Delay Start Economy ■ ■ ■ ■ 3) ■ ■ Cottons + Prewash ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ ■ Easy Iron ■ ■ ■ ■ Delicates ■ ■ ■ ■ ■ ■ Wool/Silk ■ ■ ■ Delicate Rinse ■ ■ ■ ■ Drain Spin ■ ■ Refresh ■ ■ Economy ■ ■ ■ ■ 3) ■ ■ 1) The Stain option is not available...
Page 13 - CONSUMPTION VALUES; OPTIONS; Spin
Dryness Level Type of fabric Load(kg) Spinspeed(rpm) Suggestedduration(mins) Iron Dry Suitable for ironing Cottons and Linen (sheets, tablecloths, shirts,etc) 4 1200 140 - 150 3 1200 90 - 100 1.5 1200 60 - 70 1) I n compliance with EC directive EN 50229 , the cotton reference programme for the data ...
Page 15 - DAILY USE; Loading the laundry; Setting a programme
3. Put 2 litre of water in the detergent compartment for washing phase. This activates the drain system. 4. Put a small quantity of detergent in the compartment for washing phase. 5. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from ...
Page 17 - DAILY USE - DRYING ONLY
corresponding indicator starts flashing. Press Start/Pause button again to restart the programme. 10.8 Cancelling a running programme Turn the selector dial to Off to cancel a programme which is running. Now you can select a new programme. Before starting the new programme the appliance could drain ...
Page 18 - Timed drying
2. Turn the programme dial to the programme applicable for the items to dry (cottons or synthetics). To have a good drying performance do not exceed the maximum drying loads recommended in the user manual. Do not set a spin speed lower than the automatic speed of the set programme. 11.2 Timed drying...
Page 19 - Washing & Timed Drying; HINTS AND TIPS; The laundry load
To have a good drying performance do not exceed the maximum drying loads recommended in the user manual. Do not set a spin speed lower than the automatic speed of the set programme. 12.2 Washing & Timed Drying To have a good drying the appliance does not let you set a too low spin speed for the ...
Page 21 - CARE AND CLEANING
• Fabrics with residue of hair sprays, nail solvents or similar. • Garments with foam-rubber or materials similar to foam-rubber. 13.8 Garment labels When you dry the laundry, obey the indications on the labels of the manufacturers: • = The item can be tumble dried • = The drying cycle is at high te...
Page 22 - Cleaning the detergent dispenser; Cleaning the drain filter
Regularly examine the seal and remove all objects from the inner part. 14.5 Cleaning the detergent dispenser 1. MAX 1 2 2. MAX 3. 4. MAX 14.6 Cleaning the drain filter The pump should be inspected regularly and particularly if:• The appliance does not empty and/or spin.• The appliance makes an unusu...
Page 25 - TROUBLESHOOTING; Introduction; Possible failures
WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 15. TROUBLESHOOTING WARNING! Refer to Safety chapters. 15.1 Introduction The appliance does not start or it stops during operation...
Page 28 - INSTALLATION; Unpacking
16. INSTALLATION 16.1 Unpacking WARNING! Remove all the packaging and the transit bolts before installing the appliance. Use the gloves. Remove the external film. Ifnecessary, use a cutter. Remove the cardboard top. Remove thepolystyrene packaging materials. Remove the internal film. Open the door. ...
Page 30 - Positioning and levelling
Remove the three bolts. Use the key suppliedwith the appliance. Pull out the plasticspacers. Put the plastic caps in the holes. You can findthese caps in the user manual bag. We recommend that you keep the packaging and the transit bolts for any movements of the appliance. 16.2 Positioning and level...
Page 31 - The inlet hose; Water drainage
• After having levelled the appliance, tighten the lock nuts. WARNING! Never place cardboard, wood or similar materials under the appliance to compensate for any unevenness in the floor. 16.3 The inlet hose 20 O 20 O 45 O 45 O • Connect the hose to the back appliance. Turn the inlet hose only left o...
Page 33 - Building in
To a sink spigot • Refer to the illustration. Put the drain hose in the spigot and tighten it with a clip. • Make sure that the drain hose makes a loop to prevent particles going into theappliance from the sink. To a wall-pipe • Directly to a built-in drain pipe in the room wall and tighten it with ...
Page 34 - Preparation and assembly of the door
Remove the screws of the top cover on therear of the appliance and install the anti-tilting device as shown in the drawing. ~10mm Adjust the anti-tilting device so that thedistance from the counter is 10mm. Loosenthe nut counterclockwise with a 3mm wrench.Adjust the height and turn the nut clockwise...
