Page 2 - SERVICE; General information and tips; CONTENTS; PROGRAMME
SERVICE When contacting Service, ensure thatyou have the following data available.The information can be found on therating plate. ModelPNCSerial Number The following symbols are used in thisuser manual: Warning - Important Safety information. General information and tips Environmental information S...
Page 4 - SAFETY INFORMATION; CHILD SAFETY DEVICE
SAFETY INFORMATION Before the installation and use, readthis manual carefully:• For your safety and the safety of your property • To help the environment• For the correct operation of the ap- pliance. Always keep these instructions with theappliance also if you move or give it toa different person.T...
Page 6 - ENVIRONMENT CONCERNS; PACKAGING MATERIALS; TECHNICAL INFORMATION
ENVIRONMENT CONCERNS PACKAGING MATERIALS Recycle the materials with the symbol . Put the packaging in applicable con-tainers to recycle it. ECOLOGICAL HINTS To help the environment, use less waterand energy, obey these instructions:• Set a programme without the pre- wash phase to wash laundry with n...
Page 7 - Spanner
PRODUCT DESCRIPTION 1 2 3 9 10 6 5 7 8 4 11 12 13 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Internal lamp 6 Rating plate 7 Drain pump 8 Feet for the appliance level 9 Water drain hose 10 Water inlet hose 11 Mains cable 12 Transit bolts 13 Feet for the appliance level INTERIOR A...
Page 8 - CONTROL PANEL; TOUCH SCREEN
CONTROL PANEL Wolle/Seide Koch/Bunt Extra Leise Pflegeleicht Leichtbügeln Feinwäsche Daunen Anti-Allergie Schleudern/ Pumpen Spülen Jeans 20Min. - 3kg Super Eco Auffrischen Glätten Auto Off Memory 1 Memory 2 Dampf Start/Pause Zeit- vorwahl Zeit Sparen Extra Spülen Flecken/ Vor w. Temp. U/Min. Gewich...
Page 9 - DISPLAY; Child lock
DISPLAY 3 A B C D E F G H I J A The text bar:• Guides you in the use of the appliance.• Shows the programme status and phase.• Shows alarm messages. Refer to 'Troubleshooting' . The symbols appear on the display when the related phase or function is set. B Child lock C Door lockedYou cannot open the...
Page 12 - activate
VORWÄSCHE Use this function for heavy soil.The appliance adds a prewash phase tothe main wash.The programme duration increases. EINWEICHEN Use this function for heavy soil.The appliance soaks the laundry at30°C for about half an hour before towash. SPIN BUTTON 11 Touch button 11 to: • Decrease the m...
Page 13 - WASHING PROGRAMMES
WASHING PROGRAMMES Programme Temperature Type of loadWeight of load Programmedescription Functions Koch/Bunt 95° - Cold White and col-oured cottonwith heavy levelof soil.Maximum load 8kg WashRinsesLong spin SPIN REDUC-TIONSPÜLSTOPPFLECKEN 1) VORWÄ-SCHE 2) EINWEICHENEXTRA SPÜ-LENZEIT SPA-REN 3) Extra...
Page 16 - STEAM PROGRAMMES; CONSUMPTION VALUES; Programmes for energy saving
5) The default spin speed is for cotton items. Set the spin speed applicable with your laundry.6) If you select this function the appliance performs only a drain phase.7) Press button to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin. 8) Use a special deter...
Page 17 - BEFORE FIRST USE; LANGUAGE SETTING
Programme 1) Energy consumption (KWh) 2) Water consump- tion (litre) 2) Cotton 40 °C economy 3) 0.70 57 The cotton 60 °C economy and cotton 40 °C economy are the standardcotton programmes for normally soiled cotton laundry. They are suitableto clean normally soiled cotton laundry and they are the mo...
Page 18 - MAX
7. Touch button 6 to confirm the se- lection. USING THE APPLIANCE 1. Open the water tap. 2. Connect the mains plug to themains socket. ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME For a correct operation of the weight sensor, activate the appliance andset the programme BEFORE you put the laundry...
Page 19 - USING THE DETERGENT AND ADDITIVES; This is the maximum level for the quantity of liquid additives.
Make sure not to have the laundry outof the drum between the seal and thedoor. There is the risk of water leakageor damage laundry. USING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soakprogramme.Add the detergent for prewash and soak before the start of thepr...
Page 21 - Steam; STARTING A PROGRAMME; INTERRUPT A PROGRAMME; AT THE END OF PROGRAMME
Before you touch button 6 to start the appliance, you can can-cel or change the set of the de-lay start. You cannot set the delay startwith the Steam programme. STARTING A PROGRAMME 1. Touch button 6 to start the pro- gramme. The indicator of button 6 stops to flash and is on with red col-our. If a ...
Page 22 - HELPFUL HINTS AND TIPS; THE LAUNDRY LOAD
4. The indicator of button 6 goes off. 5. The door lock symbol goes off. 6. Press button 1 to deactivate the appliance. After five minutes fromthe end of the programme, the AU-TO OFF function automatically de-activates the appliance. When you activate the appli-ance again, the display showsthe end o...
Page 23 - Water hardness table; CARE AND CLEANING; DESCALING
DETERGENTS AND ADDITIVES • Only use detergents and additives specially made for washing machines. • Do not mix different types of deter- gents. • To help the environment, do not use more than the correct quantity of de-tergent. • Obey the instructions that you find on the on packaging of these prod-...
Page 24 - To clean the dispenser:
• Set the hottest cotton wash pro- gramme • Use a correct quantity of powder de- tergent with biological properties. After each wash, keep the door openfor a while to prevent mould and to letunpleasant smells go out. DOOR SEAL Regularly examine the seal and removeall objects from the inner part. DRU...
Page 25 - DRAIN PUMP; • The display shows an alarm code be-; To clean the drain pump:; Open the drain pump door.
5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the re-cess. DRAIN PUMP Regularly examine the drainpump and make sure that it isclean. Clean the pump if:• The appliance does not drain the wa- ter. • The drum cannot turn.• The appliance makes an unusual noise because of the bl...
Page 27 - To clean the water inlet filters:; EMERGENCY DRAIN; Remove the water inlet hose
To clean the water inlet filters: 1. Close the water tap. 2. Remove the water inlet hose fromthe water tap. 3. Clean the filter in the inlet hose witha stiff brush. 4. Remove the inlet hose behind theappliance. 5. Clean the filter in the valve with astiff brush or a towel. 45° 35° 6. Install again t...
Page 28 - TROUBLESHOOTING; Problem
TROUBLESHOOTING The start of the appliance does not oc-cur or it stops during operation.Try to find a solution to the problembefore you contact the service centre(refer to the table). With some problems, the acousticsignals operate and the displayshows an alarm message. WARNING! Deactivate the appli...
Page 29 - PROBLEM WITHOUT ALARM MESSAGE
PROBLEM WITHOUT ALARM MESSAGE Problem Possible cause Possible solution The appliancedoes not drainthe water. A washing programmewithout the drain phaseis set. Set the drain programme. The function Rinse Holdis on. Set the drain programme. The spin phasedoes not operate. The spin phase is off. Set th...
Page 31 - INSTALLATION; UNPACKING; Remove the cardboard top.
INSTALLATION UNPACKING 1. Use the gloves. Remove the exter-nal film. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packagingmaterials. 4. Remove the internal film. 5. Open the door. Remove the poly-styrene piece from the door sealand all the items from the drum. ...
Page 32 - Pull out the plastic spacers.
6. Put the front piece on the floor be-hind the appliance. Carefully putdown the appliance with the rearside on it. Make sure not to dam-age the hoses. 1 2 7. Remove the polystyrene protectionfrom the bottom. 8. Pull up the appliance in vertical po-sition. 9. Remove the power supply cableand the dra...
Page 33 - POSITIONING AND LEVELLING
12. Replace the plastic spacers withthe plastic caps. You can find thesecaps in the user manual bag. WARNING! Remove all the packaging andthe transit bolts before you in-stall the appliance. We recommend that you keepthe packaging and the transitbolts for when you move the ap-pliance. POSITIONING AN...
Page 34 - THE INLET HOSE; • Connect the hose to the appliance.; WATER DRAINAGE
THE INLET HOSE 35 O 35 O 35 O 45 O 45 O 45 O • Connect the hose to the appliance. Turn the inlet hose only left or right.Loose the ring nut to set it in the cor-rect position. • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are noleaks from the cou...
Page 35 - • To a sink spigot.
With the plastic hose guide. • On the edge of a sink.• Make sure that the plastic guide can- not move when the appliance drains.Attach the guide to the water tap orthe wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly intoa drain pipe at a height of not lessthan 60 cm and n...
