Page 2 - SERVICE; General information and tips; CONTENTS; PROGRAMME
SERVICE When contacting Service, ensure thatyou have the following data available.The information can be found on therating plate. ModelPNCSerial Number The following symbols are used in thisuser manual: Warning - Important Safety information. General information and tips Environmental information S...
Page 4 - SAFETY INFORMATION; CHILD SAFETY DEVICE
SAFETY INFORMATION Before the installation and use, readthis manual carefully:• For your safety and the safety of your property • To help the environment• For the correct operation of the ap- pliance. Always keep these instructions with theappliance also if you move or give it toa different person.T...
Page 6 - ENVIRONMENT CONCERNS; PACKAGING MATERIALS; TECHNICAL INFORMATION
ENVIRONMENT CONCERNS PACKAGING MATERIALS Recycle the materials with the symbol . Put the packaging in applicable con-tainers to recycle it. ECOLOGICAL HINTS To help the environment, use less waterand energy, obey these instructions:• Set a programme without the pre- wash phase to wash laundry with n...
Page 7 - Spanner
PRODUCT DESCRIPTION 1 2 3 9 10 6 5 7 8 4 11 12 13 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Internal lamp 6 Rating plate 7 Drain pump 8 Feet for the appliance level 9 Water drain hose 10 Water inlet hose 11 Mains cable 12 Transit bolts 13 Feet for the appliance level INTERIOR A...
Page 8 - CONTROL PANEL
CONTROL PANEL Wolle/Seide Koch/Bunt Extra Leise Pflegeleicht Leichtbügeln Feinwäsche Daunen Anti-Allergie Schleudern/ Pumpen Spülen Outdoor 20Min. - 3kg Super Eco Auffrischen Glätten Auto Off Memory 1 Memory 2 Dampf Start/Pause Zeit- vorwahl Zeit Sparen Extra Spülen Flecken/ Vor w. Temp. U/Min. Gewi...
Page 10 - DISPLAY; B C; Child lock
DISPLAY 3 A B C D E F G H I J A The text bar:• Guides you in the use of the appliance.• Shows the programme status and phase.• Shows alarm messages. Refer to 'Troubleshooting' . The symbols appear on the display when the related phase or function is set. B Child lock C Door lockedYou cannot open the...
Page 13 - activate
VORWÄSCHE Use this function for heavy soil.The appliance adds a prewash phase tothe main wash.The programme duration increases. EINWEICHEN Use this function for heavy soil.The appliance soaks the laundry at30°C for about half an hour before towash. SPIN BUTTON 11 Touch button 11 to: • Decrease the m...
Page 14 - WASHING PROGRAMMES
WASHING PROGRAMMES Programme Temperature Type of loadWeight of load Programmedescription Functions Koch/Bunt 95° - Cold White and col-oured cottonwith heavy levelof soil.Maximum load 9kg WashRinsesLong spin SPIN REDUC-TIONSPÜLSTOPPFLECKEN 1) VORWÄ-SCHE 2) EINWEICHENEXTRA SPÜ-LENZEIT SPA-REN 3) Extra...
Page 17 - STEAM PROGRAMMES; CONSUMPTION VALUES
7) Press button to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin. 8) Use a special detergent for very low temperature.9) Set this programme to have a good washing results and decrease the energy consumption. The time of the washing programme is extended. S...
Page 18 - BEFORE FIRST USE; LANGUAGE SETTING; USING THE APPLIANCE
Standard programmes for theEnergy Label consumptionvalues The cotton 60 °C economy and cotton40 °C economy are the standard cottonprogrammes for normally soiled cottonlaundry. They are suitable to clean nor-mally soiled cotton laundry and they are the most efficient programmes interms of combined en...
Page 19 - MAX
ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME For a correct operation of the weight sensor, activate the appliance andset the programme BEFORE you put the laundry in the drum. 1. Press button 1 to activate the ap- pliance. 2. Turn the programme knob ( 2 ) to the necessary programme or touchone of...
Page 20 - USING THE DETERGENT AND ADDITIVES; This is the maximum level for the quantity of liquid additives.
Make sure not to have the laundry outof the drum between the seal and thedoor. There is the risk of water leakageor damage laundry. USING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soakprogramme.Add the detergent for prewash and soak before the start of thepr...
Page 21 - Check the position of the flap; – Do not use gelatinous or thick
Check the position of the flap 1. Pull out the detergent dispenseruntil it stops. 2. Press the lever down to remove thedispenser. 3. To use powder detergent, turn theflap up. 4. To use liquid detergent, turn theflap down. With the flap in the positionDOWN: – Do not use gelatinous or thick liquid det...
Page 22 - SET THE DELAY START; Steam; STARTING A PROGRAMME; INTERRUPT A PROGRAMME
SET THE DELAY START 1. Touch button 7 again and again to set the desired delayed start.The display shows the expectedend of the programme 2. Touch button 6 , the appliance starts the countdown of the delaystart.When the countdown is comple-ted, the programme starts auto-matically. Before you touch b...
Page 23 - AT THE END OF PROGRAMME
If you deactivate the appliance,it is necessary to set the pro-gramme again. AT THE END OF PROGRAMME 1. The appliance stops automatically. 2. The acoustic signals operate, if it isactive. 3. In the display goes on and the message tells you that the pro-gramme is completed. 4. The indicator of button...
Page 24 - HELPFUL HINTS AND TIPS; THE LAUNDRY LOAD
HELPFUL HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, col- oured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. • Some coloured items can discolour with the first wash. We reco...
Page 25 - Water hardness table
Water hardness table Level Type Water hardness °dH °T.H. mmol/l Clarke 1 soft 0-7 0-15 0-1.5 0-9 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 ENGLISH 25
Page 26 - CARE AND CLEANING; DESCALING; gramme; DOOR SEAL; • Clean the drum with special product
CARE AND CLEANING WARNING! Disconnect the appliance from themains supply before you clean it. DESCALING The water we use contains limescale. Ifit becomes necessary, use a water soft-ener to remove limescales.Use a special product made for wash-ing machines. Obey the instructionsthat you find on the ...
Page 27 - DETERGENT DISPENSER; To clean the dispenser:; Pull the dispenser out.; DRAIN PUMP; • The display shows an alarm code be-
DETERGENT DISPENSER To clean the dispenser: 1 2 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquidadditive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the re-cess. DRAIN PUMP Regularly examin...
Page 28 - To clean the drain pump:; Open the drain pump door.
To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess ofthe drain pump to collect the waterthat flows out. 4. Press the two levers and pull for-ward the drainage duct to let thewater flow out. 1 2 5. When the container is full of...
Page 29 - To clean the water inlet filters:; EMERGENCY DRAIN
1 2 9. Clean the filter under the water tapand put it back in the pump intothe special guides. 10. Make sure that you tighten correct-ly the filter to prevent leakages. 11. Put the flap back and close thedrain pump door. THE INLET HOSE FILTER ANDTHE VALVE FILTER It could be necessary to clean the fi...
Page 30 - FROST PRECAUTIONS; Remove the water inlet hose
When you drain the water with theemergency drain procedure, you mustactivate again the drain system: 1. Put 2 litres of water in the mainwash compartment of the deter-gent dispenser. 2. Start the programme to drain thewater. FROST PRECAUTIONS If the appliance is installed in an areawhere the tempera...
Page 31 - TROUBLESHOOTING; Problem
TROUBLESHOOTING The start of the appliance does not oc-cur or it stops during operation.Try to find a solution to the problembefore you contact the service centre(refer to the table). With some problems, the acousticsignals operate and the displayshows an alarm message. WARNING! Deactivate the appli...
Page 32 - PROBLEM WITHOUT ALARM MESSAGE
PROBLEM WITHOUT ALARM MESSAGE Problem Possible cause Possible solution The appliancedoes not drainthe water. A washing programmewithout the drain phaseis set. Set the drain programme. The function Rinse Holdis on. Set the drain programme. The spin phasedoes not operate. The spin phase is off. Set th...
Page 34 - INSTALLATION; UNPACKING; Remove the cardboard top.
INSTALLATION UNPACKING 1. Use the gloves. Remove the exter-nal film. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packagingmaterials. 4. Remove the internal film. 5. Open the door. Remove the poly-styrene piece from the door sealand all the items from the drum. ...
Page 37 - POSITIONING AND LEVELLING
14. Replace the plastic spacers withthe plastic caps. You can find thesecaps in the user manual bag. WARNING! Remove all the packaging andthe transit bolts before you in-stall the appliance. We recommend that you keepthe packaging and the transitbolts for when you move the ap-pliance. POSITIONING AN...
Page 38 - THE INLET HOSE; • Connect the hose to the appliance.; WATER DRAINAGE
THE INLET HOSE 35 O 35 O 35 O 45 O 45 O 45 O • Connect the hose to the appliance. Turn the inlet hose only left or right.Loose the ring nut to set it in the cor-rect position. • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are noleaks from the cou...
Page 39 - • To a sink spigot.
With the plastic hose guide. • On the edge of a sink.• Make sure that the plastic guide can- not move when the appliance drains.Attach the guide to the water tap orthe wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly intoa drain pipe at a height of not lessthan 60 cm and n...
