Page 2 - SERVICE; General information and tips; CONTENTS
SERVICE When contacting Service, ensure thatyou have the following data available.The information can be found on therating plate. ModelPNCSerial Number The following symbols are used in thisuser manual: Warning - Important Safety information. General information and tips Environmental information S...
Page 4 - SAFETY INFORMATION; CHILD SAFETY DEVICE
SAFETY INFORMATION Before the installation and use, readthis manual carefully:• For your safety and the safety of your property • To help the environment• For the correct operation of the ap- pliance. Always keep these instructions with theappliance also if you move or give it toa different person.T...
Page 6 - ENVIRONMENT CONCERNS; PACKAGING MATERIALS; TECHNICAL INFORMATION
ENVIRONMENT CONCERNS PACKAGING MATERIALS Recycle the materials with the symbol . Put the packaging in applicable con-tainers to recycle it. ECOLOGICAL HINTS To help the environment, use less waterand energy, obey these instructions:• Set a programme without the pre- wash phase to wash laundry with n...
Page 7 - Spanner
PRODUCT DESCRIPTION 1 2 3 8 9 5 6 7 4 10 11 12 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump 7 Feet for the appliance level 8 Water drain hose 9 Water inlet valve 10 Mains cable 11 Transit bolts 12 Feet for the appliance level ACCESSORIES 1 2 3 4 1 Spanner...
Page 8 - CONTROL PANEL; Auto Off; AUTO OFF BUTTON
CONTROL PANEL 1 2 3 4 5 6 7 8 9 10 1 On/Off button ( Auto Off ) 2 Programme knob 3 Display 4 Start Pause button ( Start/Pause ) 5 Delay start button ( Tidsforvalg ) 6 Time saving button ( Spar Tid ) 7 Extra rinse button ( Ekstraskyll ) 8 Stain/Prewash button ( Flekker / Forvask ) 9 Spin reduction bu...
Page 9 - DISPLAY; The phase symbols
DISPLAY 3 A H J K L C D E F G B I The display shows: A The temperature of the set programme Cold water B The spin speed of the set programme No Spin symbol 1) Rinse Hold symbol 1) Only available for Spin/Drain programme. C Prewash phase Washing phase Rinses phase Spin phase The phase symbols • When ...
Page 11 - STAIN; SPIN BUTTON
The indicator bar is fully filled when you set to the maximumnumber of rinses. L The Stain symbol comes on when you activate the function. The Prewash symbol comes on when you activate the func-tion. The indicator bar is not fully filled when you set only one ofthe functions. The indicator bar is fu...
Page 12 - CHILD LOCK FUNCTION; activate
- - , the appliance does not heat the water. ACOUSTIC SIGNALSFUNCTION You can hear the acoustic signals when:• You activate the appliance.• You deactivate the appliance.• You press the buttons.• The programme is completed.• The appliance has a malfunction.To deactivate/activate the acoustic signals,...
Page 13 - PROGRAMMES; Ekstra Stille
PROGRAMMES ProgrammeTemperature Type of loadMax. weight of load Cycledescrip-tion Functions Koke-/ Kulørt 95° - 0° White and coloured cottonwith normal soil.max. load 8 kg WashRinsesLongspin SPIN REDUCTIONSKYLLESTOPPFORVASK 1) EKSTRA SKYLLFLEKKER 2) SPAR TID 3) Ekstra Stille 95° - 0° White and colou...
Page 15 - STEAM PROGRAMMES; CONSUMPTION VALUES
5) Set the spin speed. Make sure that it agrees with the laundry. To select the DRAIN programme only, set the function NO SPIN. 6) Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin. 7) Set this programme to decrease the time and the...
Page 17 - Press button; LOADING THE LAUNDRY; Open the appliance door.
BEFORE FIRST USE 1. To activate the drain system, put 2litre of water in the main wash com-partment of the detergent dispens-er. 2. Put a small quantity of detergent inthe main wash compartment of the detergent dispenser. Set and starta programme for cotton at thehighest temperature without laun-dry...
Page 18 - FILLING THE DETERGENT AND ADDITIVES; This is the maximum level for the quantity of liquid additives.; Check the position of the flap
FILLING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soakprogramme.Add the detergent for prewash and soak before the start of theprogramme. The detergent compartment for the washing phase.If you use a liquid detergent, put it immediately before you startthe pro...
Page 19 - SETTING AND STARTING A PROGRAMME; INTERRUPT A PROGRAMME
3. To use powder detergent, turn theflap up. 4. To use liquid detergent, turn theflap down. With the flap in the positionDOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed inthe flap. – Do not set the prewash phase. – Do not set the d...
Page 20 - Steam; CANCEL THE DELAY START; AT THE END OF THE PROGRAMME
CANCEL A PROGRAMME 1. Press button 1 to cancel the pro- gramme and to deactivate the ap-pliance. 2. Press button 1 again to activate the appliance. Now, you can set anew washing programme. The appliance does not drainthe water. CHANGE A FUNCTION You can change only some functionsbefore they operate....
Page 22 - HELPFUL HINTS AND TIPS; THE LAUNDRY LOAD
HELPFUL HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, col- oured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. • Some coloured items can discolour with the first wash. We reco...
Page 23 - Water hardness table
Water hardness table Level Type Water hardness °dH °T.H. mmol/l Clarke 1 soft 0-7 0-15 0-1.5 0-9 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 ENGLISH 23
Page 24 - CARE AND CLEANING; DESCALING; gramme; DOOR SEAL; • Clean the drum with special product
CARE AND CLEANING WARNING! Disconnect the appliance from themains supply before you clean it. DESCALING The water we use contains limescale. Ifit becomes necessary, use a water soft-ener to remove limescales.Use a special product made for wash-ing machines. Obey the instructionsthat you find on the ...
Page 25 - DETERGENT DISPENSER; To clean the dispenser:; Pull the dispenser out.; DRAIN PUMP; • The display shows an alarm code be-
DETERGENT DISPENSER To clean the dispenser: 1 2 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquidadditive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the re-cess. DRAIN PUMP Regularly examin...
Page 26 - To clean the drain pump:; Open the drain pump door.
To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess ofthe drain pump to collect the waterthat flows out. 4. Press the two levers and pull for-ward the drainage duct to let thewater flow out. 1 2 5. When the container is full of...
Page 27 - To clean the water inlet filters:; EMERGENCY DRAIN
1 2 9. Clean the filter under the water tapand put it back in the pump intothe special guides. 10. Make sure that you tighten correct-ly the filter to prevent leakages. 11. Put the flap back and close thedrain pump door. THE INLET HOSE FILTER ANDTHE VALVE FILTER It could be necessary to clean the fi...
Page 28 - FROST PRECAUTIONS; Remove the water inlet hose
When you drain the water with theemergency drain procedure, you mustactivate again the drain system: 1. Put 2 litres of water in the mainwash compartment of the deter-gent dispenser. 2. Start the programme to drain thewater. FROST PRECAUTIONS If the appliance is installed in an areawhere the tempera...
Page 29 - TROUBLESHOOTING
TROUBLESHOOTING The start of the appliance does not oc-cur or it stops during operation.First try to find a solution to the prob-lem (refer to the table). If not, contactthe service centre. With some problems, the acousticsignals operate and the displayshows an alarm code: • - The appliance does not...
Page 32 - INSTALLATION; UNPACKING; Remove the cardboard top.
INSTALLATION UNPACKING 1. Use the gloves. Remove the exter-nal film. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packagingmaterials. 4. Remove the internal film. 5. Open the door. Remove the poly-styrene piece from the door sealand all the items from the drum. ...
Page 33 - Pull out the plastic spacers.
6. Put the front piece on the floor be-hind the appliance. Carefully putdown the appliance with the rearside on it. Make sure not to dam-age the hoses. 1 2 7. Remove the polystyrene protectionfrom the bottom. 8. Pull up the appliance in vertical po-sition. 9. Remove the power supply cableand the dra...
Page 34 - POSITIONING AND LEVELLING
12. Replace the plastic spacers withthe plastic caps. You can find thesecaps in the user manual bag. WARNING! Remove all the packaging andthe transit bolts before you in-stall the appliance. We recommend that you keepthe packaging and the transitbolts for when you move the ap-pliance. POSITIONING AN...
Page 35 - THE INLET HOSE; • Connect the hose to the appliance.; WATER DRAINAGE
THE INLET HOSE 35 O 35 O 35 O 45 O 45 O 45 O • Connect the hose to the appliance. Turn the inlet hose only left or right.Loose the ring nut to set it in the cor-rect position. • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are noleaks from the cou...
Page 36 - • To a sink spigot.
With the plastic hose guide. • On the edge of a sink.• Make sure that the plastic guide can- not move when the appliance drains.Attach the guide to the water tap orthe wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly intoa drain pipe at a height of not lessthan 60 cm and n...
