AEG IKB64433IB- User Manual

Sensorfield Function Comment 8 - To select the cooking zone. 9 / - To increase or decrease the time. 10 PowerBoost To activate the function. 11 - Control bar To set a heat setting. 3.3 Heat setting displays Display Description The cooking zone is deactivated. - The cooking zone operates. Pause opera...

4. DAILY USE WARNING! Refer to Safety chapters. 4.1 Activating and deactivating Touch for 1 second to activate or deactivate the hob. 4.2 Automatic Switch Off The function deactivates the hob automatically if: • all cooking zones are deactivated, • you do not set the heat setting after you activate ...

• The function decreases the power to the other cooking zones connected to the same phase. • The heat setting display of the reduced zones changes between two levels. Power management function with Power limitation function When you set the Power limitation function to 6.0 kW or less , power of the ...

4. Touch a few times until comes on. 5. Touch of the Timer to select an automatic mode. To operate the hood directly on the hood panel deactivate the automatic mode of the function. When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After tha...

• crack noise: cookware is made of different materials (sandwich construction). • whistle sound: you use the cooking zone with high power level and the cookware is made of different materials (sandwich construction). • humming: you use high power level. • clicking: electric switching occurs. • hissi...

5.5 Hints and Tips for Hob²Hood When you operate the hob with the function:• Protect the hood panel from direct sunlight. • Do not spot halogen light on the hood panel. • Do not cover the hob control panel. • Do not interrupt the signal between the hob and the hood (for example with a hand or a cook...

7. TROUBLESHOOTING WARNING! Refer to Safety chapters. 7.1 What to do if... Problem Possible cause Remedy You cannot activate or oper-ate the hob. The hob is not connected toan electrical supply or it isconnected incorrectly. Check if the hob is correctlyconnected to the electricalsupply. Refer to th...

Problem Possible cause Remedy The heat setting changesbetween two levels. Power management oper-ates. Refer to "Daily use". The sensor fields becomehot. The cookware is too large oryou put it too near to thecontrols. Put large cookware on therear zones if possible. There is no sound when you...

8. INSTALLATION WARNING! Refer to Safety chapters. 8.1 Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. Serial number ........................... 8.2 Built-in hobs Only use the built-in hobs aft...

8.4 Assembly min.50mm min.500mm 514+1mm 490+1mm 560+1mm 584+1mm min. 55mm R10mm R5mm 12mm 7mm min.28 mm min. 12 mm min. 60mm If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process. ENGLISH 19

9. TECHNICAL DATA 9.1 Rating plate Model IKB64433IB PNC 949 597 451 00 Typ 61 B4A 00 AD 220 - 240 V / 400 V 2N 50 - 60 Hz Induction 7.2 kW Made in Germany Ser.Nr. ................. 7.2 kW AEG 9.2 Cooking zones specification Cooking zone Nominal power(maximum heatsetting) [W] PowerBoost[W] PowerBoost...

EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance 10.2 Energy saving You can save energy during everyday cooking if you follow below hints.• When you heat up water, use only the amount you need. • If it is possible, always put the lids on the cookw...