Page 2 - spend a few minutes reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.; SAFETY INFORMATION; Before the installation and use of the appliance,
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................5 3. INSTALLATION.............................................
Page 5 - SAFETY INSTRUCTIONS; Installation
for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents. 2. SAFETY INSTRUCTIONS This appliance is suitable for thefollowing markets: GB 2.1 Installation WARNING! Only a qualified person must install this appliance. WARNING! Risk of injury ...
Page 7 - INSTALLATION; Before the installation
• Use only stable cookware with the correct shape and diameter larger than the dimensions of the burners. • Make sure cookware is centrally positioned on the burners. • Make sure the flame does not go out when you quickly turn the knob from the maximum to the minimum position. • Use only the accesso...
Page 8 - Gas Connection
3.2 Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition).For appliances installed in the Republic of Ireland please refer to NSAI- Domestic Gas Installation I.S...
Page 10 - Replacement of the
your local Electricity Board, or a contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting [NICEIC]). The manufacturer refuses to be held responsible, if these safety measures are not abided by. Supply connections This hob has to be connected to 220-2...
Page 11 - Assembly
symbol , or coloured green and yellow. 2. Connect the blue (neutral) wire to the terminal which is marked with the letter 'N' or coloured blue. 3. Connect the brown (live) wire to the terminal which is marked with the letter 'L'. It must always be connected to the network phase. There must be no cut...
Page 13 - Possibilities for insertion; PRODUCT DESCRIPTION; Cooking surface layout; DAILY USE
3.9 Possibilities for insertion The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary. Kitchen unit with door or drawer min 6 mm min 30 mm 60 mm min 5 mm (max 150 mm) A B A. Removable panel B. Space for connections Ki...
Page 15 - HINTS AND TIPS; Cookware
5.3 Turning the burner off To put the flame out, turn the knob tothe off position . WARNING! Always turn the flame down or switch it off before you remove the pans from the burner. 5.4 Using the wok stand The wok stand lets you use a round bottomed wok on the hob. Use the wok stand on the Multi Crow...
Page 16 - CARE AND CLEANING; General information
7. CARE AND CLEANING WARNING! Refer to Safety chapters. 7.1 General information • Clean the hob after each use. • Always use cookware with a clean base. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner suitable for the surface of the hob. WARN...
Page 17 - Cleaning the hob; Cleaning the spark plug; TROUBLESHOOTING
2 1 2 The shape of pan supports and the amount of burners can be different in other models of the appliance. 7.4 Cleaning the hob • Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. • Remove when th...
Page 18 - If you cannot find a; TECHNICAL DATA; Hob dimensions
Problem Possible cause Remedy The flame extinguishes im-mediately after ignition. Thermocouple is not heatedup sufficiently. After lightning the flame,keep the knob pushed forequal or less than 10 sec-onds. The flame ring is uneven. Burner crown is blocked withfood residues. Make sure that the injec...
Page 19 - Bypass diameters; Other technical data
Depth 510 mm 9.2 Bypass diameters BURNER Ø BYPASS 1/100 mm Multi Crown 57 Semi-rapid 35 Auxiliary 28 9.3 Other technical data TOTAL POW-ER: Gas original: G20 (2H) 20 mbar 10,9 kW Gas replace-ment: G30 (3+) 28-30 mbar 745 g/h G31 (3+) 37 mbar 732 g/h Electric supply: 220-240 V ~ 50-60 Hz 3 core flexi...
Page 20 - ENERGY EFFICIENCY; Product information according to EU 66/2014; ENVIRONMENTAL CONCERNS
BURNER NORMALPOWER kW MINIMUMPOWER kW INJECTORMARK NOMINAL GAS FLOW g/h G30 28-30mbar G31 37 mbar Auxiliary 1,0 0,33 50 73 71 10. ENERGY EFFICIENCY 10.1 Product information according to EU 66/2014 Model identification HG775450VB Type of hob Built-in hob Number of gas burners 5 Energy efficiency per ...