Page 2 - spend a few minutes reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.; SAFETY INFORMATION; Before the installation and use of the appliance,
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION......................................
Page 4 - SAFETY INSTRUCTIONS; Installation
• WARNING: Danger of fire: Do not store items on the cooking surfaces. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use a steam cleaner to clean the appliance. • After use, switch off the hob element by its control...
Page 6 - PRODUCT DESCRIPTION; Cooking surface layout
• The vapours that very hot oil releases can cause spontaneous combustion. • Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. W...
Page 7 - Control panel layout
3.2 Control panel layout 11 10 9 13 6 7 5 1 2 3 4 8 12 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensorfield Function Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / The Child SafetyDevice To lock / unlock the co...
Page 8 - DAILY USE
3.3 Heat setting displays Display Description The cooking zone is deactivated. - The cooking zone operates. Automatic Heat Up function operates. Power function operates. + digit There is a malfunction. / / OptiHeat Control (3 step Residual heat indicator): continue cooking /keep warm / residual heat...
Page 9 - The heat setting
some time comes on and the hob deactivates. The relation between the heat setting and the time after which the hob deactivates: Heat setting The hob deacti-vates after , 1 - 3 6 hours 4 - 7 5 hours 8 - 9 4 hours 10 - 14 1.5 hour 4.3 The heat setting To set or change the heat setting:Touch the contro...
Page 11 - Hob2Hood
• Each phase has a maximum electricity loading of 3700 W. • The function divides the power between cooking zones connected to the same phase. • The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3700 W. • The function decreases the powe...
Page 12 - FLEXIBLE INDUCTION COOKING AREA; FlexiBridge function
When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from accidental activation of the fan for the next 30 seconds. Operating the fan speed manually You can also oper...
Page 13 - FlexiBridge Big Bridge
100-160mm Place the cookware with the bottom diameter larger then 160 mm centrally between two sections. > 160 mm 5.2 FlexiBridge Standard mode This mode is active when you activate the hob. It connects the sections into two separate cooking zones. You can set the heat setting for each zone separ...
Page 14 - FlexiBridge Max Bridge; PowerSlide function
Incorrect cookware position: 5.4 FlexiBridge Max Bridge mode To activate the mode press until you see the correct mode indicator. This mode connects all sections into one cooking zone. To set the heat setting use one of the left side control bars. Correct cookware position: To use this mode you have...
Page 15 - HINTS AND TIPS; Cookware
General information: • 160 mm is the minimum bottom diameter of the cookware for this function. • Heat setting display for the left rear control bar shows the position of the cookware on the induction cookingarea. Front , middle , rear . • Heat setting display for the left front control bar shows th...
Page 16 - The noises during; Examples of cooking
The printing on the flexible induction cooking area may become dirty or change colour from sliding the cookware. You can clean the area in a standard way. The bottom of the cookware must be as thick and flat as possible. Cookware dimensions Induction cooking zones adapt to the dimension of the botto...
Page 17 - Hints and Tips for
Heat setting Use to: Time(min) Hints 7 - 9 Steam potatoes. 20 - 60 Use max. ¼ l water for 750 g ofpotatoes. 7 - 9 Cook larger quantities of food,stews and soups. 60 - 150 Up to 3 l liquid plus ingredi- ents. 9 - 12 Gentle fry: escalope, veal cor-don bleu, cutlets, rissoles,sausages, liver, roux, egg...
Page 18 - CARE AND CLEANING; General information; TROUBLESHOOTING
7. CARE AND CLEANING WARNING! Refer to Safety chapters. 7.1 General information • Clean the hob after each use. • Always use cookware with clean bottom. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner applicable for the surface of the hob. • ...
Page 21 - If you cannot find a; INSTALLATION; Before the installation
Problem Possible cause Remedy comes on. There is an error in the hobbecause a cookware boileddry. Automatic Switch Offand the overheating protec-tion for the zones operate. Deactivate the hob. Removethe hot cookware. After ap-proximately 30 seconds, acti-vate the zone again. If thecookware was the p...
Page 22 - Assembly
9.4 Assembly min.50mm min.500mm min.2mm min. 2 mm A B A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min 30 mm min. 500 mm < 20 mm > 20 mm min. 2 mm A B A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 500 mm R 5mm min. 55mm 560 +1 mm 490 +1 mm min.38 mm min.2 mm www.aeg.com 22
Page 23 - Protection box; TECHNICAL DATA; Rating plate
min. 12 mmmin. 2 mm 9.5 Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. Yo...
Page 24 - Cooking zones specification; ENERGY EFFICIENCY; Product information according to EU 66/2014
10.2 Cooking zones specification Cooking zone Nominal power(maximum heatsetting) [W] Power function[W] Power functionmaximum dura-tion [min] Cookware diam-eter [mm] Right front 1400 2500 4 125 - 145 Right rear 1800 2800 10 145 - 180 Flexible induc-tion cookingarea 2300 3200 10 minimum 100 The power ...
Page 25 - ENVIRONMENTAL CONCERNS
• If it is possible, always put the lids on the cookware. • Before you activate the cooking zone put the cookware on it. • Put the smaller cookware on the smaller cooking zones. • Put the cookware directly in the centre of the cooking zone. • Use the residual heat to keep the food warm or to melt it...
