AEG GYB06116XA- Installation Manual
AEG GYB06116XA– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1. Remove the plastic plug and mount
the adapters. Don’t forget the
sealings!
2. Mount the brass adaptor into the
safety group and place the expansion
vessel;
3. Attach the assembly at the bracket
using the tie wrap;
4. Determine the position of the
bracket in the kitchen cabinet, use
the enclosed screws to secure the
assembly to the cabinet wall or back.
•
It is recommended that pipes
are cleaned before installation
(clean the boiler also if the
safety unit is replaced)
•
The expansion groups must be
installed by connecting the
discharge tundish to the
drainage piping.
Safety group
GB
Use sealant!
1
2
3
4
Add tie wrap!
Before
Installation
Flow
direction!
For the expansion groups to work
properly, it is required to operate the
expansion relief valve ❶ by hand at
least every 6 months.
Use
Installation
❶
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
