AEG FSK31400Z- User Manual

Page 2 - CUSTOMER CARE AND SERVICE; SAFETY INFORMATION; Before the installation and use of the appliance,

CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION......................................

Page 4 - SAFETY INSTRUCTIONS; Installation

• Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. • Do not use high pressure water sprays and/or steam to clean the appliance. • If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet. • The appliance...

Page 5 - PRODUCT DESCRIPTION

WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • Do not sit or stand on the open door. • Dishwasher detergents are da...

Page 6 - CONTROL PANEL; Indicators; PROGRAMMES

5 Salt container 6 Air vent 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutlery basket 10 Lower basket 11 Upper basket 4. CONTROL PANEL 2 1 3 4 5 1 On/off button 2 Programme indicators 3 Indicators 4 Programme button 5 Delay button 4.1 Indicators Indicator Description End indicator. Rinse aid indi...

Page 7 - SETTINGS

Programme Degree of soilType of load Programme pha-ses Consumption values 1) Duration(min) Energy(kWh) Water(l) Heavy soilCrockery, cut-lery, pots andpans • Prewash• Wash 70 °C• Rinses• Dry 160 - 168 1.1 - 1.3 13-14 Normal soilCrockery andcutlery • Prewash• Wash 65 °C• Rinses• Dry 130 - 140 1.0 - 1....

Page 8 - The water softener; How to set the water softener

Press and hold the programme button until the appliance is in programme selection mode. 6.2 The water softener The water softener removes minerals from the water supply, which would have a detrimental effect on the washing results and on the appliance.The higher the content of these minerals, the ha...

Page 10 - BEFORE FIRST USE; The salt container

• The indicator shows the current setting: off = AirDry is deactivated. 4. Press the programme button to change the setting. • on =AirDryis activated . 5. Press on/off to confirm the setting. 7. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of th...

Page 11 - DAILY USE; Using the detergent

7.2 How to fill the rinse aid dispenser A B D C M A X 1 2 3 4 + - A B D C CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Press the release button ( D ) to open the lid ( C ). 2. Pour the rinse aid in the dispenser ( A ) until the liquid reaches the fill level 'max'. 3. Remove ...

Page 13 - HINTS AND TIPS

End of the programme When the programme is completed theindicator is on. 1. Press the on/off button or wait for the appliance to switch to standby mode. If you open the door before the activation of standby mode, the appliance is automatically deactivated. 2. Close the water tap. 9. HINTS AND TIPS 9...

Page 14 - CARE AND CLEANING; Cleaning the filters

• Make soft the remaining burned food on the items. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that glasses do not touch other glasses. • Put cutlery and small items in the cutlery basket. • Put light items in the upper basket. Make sure that the items do not move...

Page 16 - TROUBLESHOOTING

11. TROUBLESHOOTING If the appliance does not start or it stops during operation, before you contact an Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table. WARNING! Repairs not properly done may result in serious risk to the safety...

Page 17 - The washing and drying results are not satisfactory

Problem and alarm code Possible cause and solution The appliance stops and starts moretimes during operation. • It is normal. It provides optimal cleaning re- sults and energy savings. The program lasts too long. • If the delayed start option is set, cancel the de- lay setting or wait for the end of...

Page 19 - TECHNICAL INFORMATION; ENVIRONMENTAL CONCERNS

Problem Possible cause and solution Limescale deposits on the ta-bleware, on the tub and onthe inside of the door. • The level of salt is low, check the refill indicator.• The cap of the salt container is loose.• Your tap water is hard. Refer to "The water softener" . • Even using multi-func...

Table of Contents:

Summary

Other AEG Models