Page 2 - spend a few minutes reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.; SAFETY INFORMATION; Before the installation and use of the appliance,
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION......................................
Page 4 - SAFETY INSTRUCTIONS; Installation
• Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. • Do not use high pressure water sprays and/or steam to clean the appliance. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be r...
Page 6 - PRODUCT DESCRIPTION
3. PRODUCT DESCRIPTION 5 4 8 6 11 10 9 12 2 3 1 7 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Air vent 7 Rinse aid dispenser 8 Detergent dispenser 9 Comfort Lift basket 10 Release handle 11 Upper basket 12 Cutlery drawer www.aeg.com 6
Page 7 - CONTROL PANEL; Indicators
4. CONTROL PANEL 1 2 4 5 6 8 3 7 1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Option button 7 Indicators 8 Start button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing p...
Page 8 - PROGRAMMES
5. PROGRAMMES Programme Degree of soilType of load Programme phases Options 1) • Normal soil• Crockery and cut- lery • Prewash• Wash 50 °C• Rinses• Dry • ExtraHygiene• TimeSaver• XtraDry 2) • All• Crockery, cutlery, pots and pans • Prewash• Wash from 45 °C to 70 °C • Rinses• Dry • ExtraHygiene• Xtra...
Page 9 - Consumption values; Information for test
Programme Degree of soilType of load Programme phases Options 7) • Normal soil• Crockery and cut- lery • Prewash• Wash 50 °C• Rinses• Dry • XtraDry 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard ...
Page 10 - SETTINGS
6. SETTINGS 6.1 Programme selection mode and user mode When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode. Settings available in the user mode: • The activation or deactivation of the rinse aid empty notification. • The level of rinse aid a...
Page 11 - OPTIONS; XtraDry
• The indicator and go off. • The indicator still flashes. • The display shows the current setting: e.g. = level 4. – The levels of rinse aid range from 0A to 6A, where0A means no rinse aid is used. 2. Press Start repeatedly to change the setting. 3. Press the on/off button to confirm the setting. 6...
Page 12 - How to activate XtraDry; TimeSaver; ExtraHygiene; BEFORE FIRST USE
manually. In other programmes, the setting of XtraDry is permanent and it is automatically used in next cycles. This configuration can be changed at any time.Activating XtraDry option deactivates TimeSaver. How to activate XtraDry Press Option until the indicator comes on. If the option is not appli...
Page 13 - DAILY USE; Comfort Lift
8.1 How to fill the rinse aid dispenser A B C CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Open the lid ( C ). 2. Fill the dispenser ( B ) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Cl...
Page 15 - HINTS AND TIPS
2. Press Delay again and again until the display shows the desired delay time (from 1 to 24 hours). 3. Press Start to start the countdown. • The delay indicator comes on to confirm the start of the countdown. • The countdown starts to decrease with steps of 1 hour. Only the last hour decreases with ...
Page 17 - CARE AND CLEANING; Cleaning the filters
11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 11.1 Cleaning the filters The filter system is made...
Page 19 - TROUBLESHOOTING
• To maintain the performance of your appliance at its best, we recommend using a specific cleaning product for dishwashers (at least once a month). Follow carefully the instructions on the packaging of the product. 12. TROUBLESHOOTING If the appliance does not start or it stops during operation. Be...
Page 20 - The washing and drying results are not satisfactory
Problem and alarm code Possible solution The program lasts too long. • Select the TimeSaver option to shorten the program time (if applicable). • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown. The remaining time in thedisplay increases and skipsnea...
Page 22 - TECHNICAL INFORMATION
Problem Possible cause and solution Limescale deposits on the tuband on the inside of the door. • Clean the appliance with appliance cleaners which are particularly suitable for this purpose. • Try different detergent.• Contact the detergent manufacturer. Dull, discoloured or chippedtableware. • Mak...
Page 23 - INSTALLATION; Adjusting the level of the
14. INSTALLATION If floor is not level, adjustlevelling legs to suit The hose should not beextended by more than2 metres or water pump-out problems ma y occur Remove entire plasticmembrane from sink trapspigot & fit drain hose to spigotwith clamp There should be a minimum2mm gap between the top ...
Page 24 - Water drain hose; WARRANTY
The water pressure must be in the limits indicated in the chapter ''TECHNICAL INFORMATION''. Make sure that the local water authority gives you the average mains pressure in your area.In order to pass the safety valve through the kitchen cabinets, an opening of at least 45 mm x 90 mm is needed. 14.3...
Page 27 - ENVIRONMENTAL CONCERNS
FOR SERVICE or to find the address of your nearest authorised service centre in New Zealand FREE CALL 0800 10 66 10OR EMAIL [email protected] (New Zealand only) FOR SPARE PARTS or to find the address of your nearest state spare parts centre in New Zealand FREE CALL 0800 10 66 20OR EMAIL ...
