Page 2 - CUSTOMER CARE AND SERVICE; SAFETY INFORMATION; Before the installation and use of the appliance,
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION......................................
Page 4 - SAFETY INSTRUCTIONS; Installation
• Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. • Do not use high pressure water sprays and/or steam to clean the appliance. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be r...
Page 6 - PRODUCT DESCRIPTION
3. PRODUCT DESCRIPTION 5 4 9 8 6 10 11 2 3 1 7 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Air vent 7 Rinse aid dispenser 8 Detergent dispenser 9 Lower basket 10 Upper basket 11 Cutlery drawer www.aeg.com 6
Page 7 - CONTROL PANEL; Indicators
4. CONTROL PANEL 1 2 4 5 6 8 3 7 1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Option button 7 Indicators 8 Start button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing p...
Page 8 - PROGRAMMES
5. PROGRAMMES Programme Degree of soilType of load Programme phases Options 1) • Normal soil• Crockery and cut- lery • Prewash• Wash 50 °C• Rinses• Dry • ExtraHygiene• TimeSaver• XtraDry 2) • All• Crockery, cutlery, pots and pans • Prewash• Wash from 45 °C to 70 °C • Rinses• Dry • ExtraHygiene• Xtra...
Page 9 - Consumption values; Information for test
Programme Degree of soilType of load Programme phases Options 7) • Normal soil• Crockery and cut- lery • Prewash• Wash 50 °C• Rinses• Dry • XtraDry 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard ...
Page 10 - SETTINGS
6. SETTINGS 6.1 Programme selection mode and user mode When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode. Settings available in the user mode: • The activation or deactivation of the rinse aid empty notification. • The level of rinse aid a...
Page 11 - AirDry; OPTIONS; XtraDry
– The levels of rinse aid range are from 0A to 6A where level 0A means no rinse aid is used. 2. Press Start repeatedly to change the setting. 3. Press on/off to confirm the setting. 6.4 AirDry AirDry improves the drying results with less energy consumption. During the drying phase, the door opens au...
Page 12 - How to activate XtraDry; TimeSaver; ExtraHygiene; BEFORE FIRST USE
duration of some programmes, water consumption and the last rinse temperature can be affected.XtraDry is a permanent option for allprogrammes other than and need not to be selected at every cycle.In the other programmes the setting of XtraDry is permanent and it is automatically used in next cycles....
Page 13 - DAILY USE; Using the detergent
8.1 How to fill the rinse aid dispenser A B C CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Open the lid ( C ). 2. Fill the dispenser ( B ) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Cl...
Page 15 - HINTS AND TIPS
If you open the door before the activation of Auto Off, the appliance is automatically deactivated. 2. Close the water tap. 10. HINTS AND TIPS 10.1 General The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment.• Remove larger residu...
Page 16 - Unloading the baskets; CARE AND CLEANING; Cleaning the filters
10.5 Unloading the baskets 1. For improved drying results with the most efficient use of energy select the AirDry option, otherwise open the door by approximately 10cm at the end of the program. 2. Allow the tableware to cool for 30 - 40 minutes. 3. Hot items can be easily damaged, allow them to coo...
Page 18 - TROUBLESHOOTING
11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • To maint...
Page 20 - The washing and drying results are not satisfactory
Refer to "Before first use" , "Daily use" , or "Hints and tips" for other possible causes. Once you have checked the appliance, deactivate and activate the appliance. If the problem occurs again, contact an Authorised Service Centre.For alarm codes not described in the table,...
Page 21 - TECHNICAL INFORMATION
Problem Possible cause and solution Traces of rust on cutlery. • Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close to-gether. There are residues of deter-gent in the dispenser at theend of the programme. • The detergent tablet got stuck in t...
Page 22 - INSTALLATION; Adjusting the height of
14. INSTALLATION If floor is not level, adjust levelling legs to suit The hose should not be extended by more than 2 metres or water pump- out problems ma y occur Remove entire plastic membrane from sink trap spigot & fit drain hose to spigot with clamp There should be a minimum 2mm gap between ...
Page 23 - Water inlet hose; Water drain hose
Once the installation is completed, make sure that the bottom of the adjustable plinth is aligned with the floor. 14.3 Water inlet hose Connect the inlet hose to a water tap with an external BSP thread spout of 3/4''.For best washing performance it is recommended to connect the appliance to a cold w...
Page 24 - WARRANTY
Remove entire internal membrane 15. WARRANTY FOR SALES IN AUSTRALIA AND NEW ZEALANDALL AEG BRANDED APPLIANCES This document sets out the terms and conditions of the product warranties for AEG Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe plac...
Page 26 - ENVIRONMENTAL CONCERNS
Important Notice Before calling for service, please ensure that the steps listed in clause 8 above have been followed. SERVICE AUSTRALIA aegaustralia.com.au FOR SERVICE or to find the address of your nearest state service centre in Australia PLEASE CALL 1300 363 664 OR EMAIL customercare@aegaustrali...
