AEG FAVORIT 99015 I- User Manual

1 2 3 4 5 6 1 On/off button 2 Menu button (up) 3 Display 4 OPTION button 5 OK START button 6 Menu button (down) 3.1 Display B A A) This area shows messages, pro-grammes, options and programmephases. B) This area shows the option symbols. Symbols DELAY STARTIt comes on when you activate the delay sta...

Programme 1) Duration(min) Energy(kWh) Water(l) EXTRA SILENT 200 - 220 1.1 - 1.2 9 - 10 30 MINUTES 30 0.8 9 ECO 195 1.03 10.2 60 MINUTES 55 - 65 1.0 - 1.2 10 - 11 PROZONE 130 - 140 1.2 - 1.3 14 - 15 45° GLASS 70 - 80 0.7 - 0.9 11 - 12 PREWASH 14 0.1 4 1) The pressure and the temperature of the water...

Menu Submenu Description of the option WATER HARDNESS(10 levels are available). To adjust electronically the level ofthe water softener. PROBOOST ONOFF This option increases the waterpressure in the prewash and wash-ing phases by 40%. The washing re-sults are very good also with heavysoiled loads. M...

6.1 Adjusting the water softener Water hardness Water softener adjustment German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Elec- tronic 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 2 1) 8 29 - 36 51 - 64 5...

6.2 Filling the salt container 1. Turn the cap counterclockwise andopen the salt container. 2. Put 1 litre of water in the salt con-tainer (only for the first time). 3. Fill the salt container with dishwash-er salt. 4. Remove the salt around the openingof the salt container. 5. Turn the cap clockwis...

GRAMME END and PLEASE SWITCHOFF . 1. Press the on/off button to deactivatethe appliance. 2. Close the water tap. If you do not press the on/offbutton, the AUTO OFF function automatically deactivates the ap-pliance a few minutes after theend of the programme.This helps to decrease the ener-gy consump...

• To remove easily remaining burned food, soak pots and pans in water be-fore you put them in the appliance. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons withother cutlery. • Make sure that glasses do not touc...

A1 A2 2. To disassemble the filter ( A ), pull apart ( A1 ) and ( A2 ). 3. Remove the filter ( B ). 4. Wash the filters with water. 5. Before you put the filter ( B ) back, make sure that there are no residuesof food or soil in or around the edgeof the sump. 6. Make sure that the filter ( B ) is cor...

Display TimeBeam Problem SERVICE CODE The anti-flood device ison. WARNING! Deactivate the appliance beforeyou do the checks. Problem Possible solution You cannot activate the appli-ance. Make sure that the mains plug is connectedto the mains socket. Make sure that there is not a damaged fusein the f...

• The quality of the combi detergent tablets can be the cause. Try a differ-ent brand or activate the rinse aid dis-penser and use rinse aid together withthe combi detergent tablets. Refer to ‘HINTS AND TIPS’ forother possible causes. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth(mm) 5...