AEG FAVORIT 88400 I- User Manual

PRODUCT DESCRIPTION 11 1 2 3 4 7 9 5 6 8 10 1 Upper spray arm 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Water hardness dial 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutlery basket 10 Lower basket 11 Upper basket 6 www.aeg.com Downloaded from DishWasher-Manual.com Manuals

CONTROL PANEL 1 2 3 5 4 6 9 8 7 A B C 1 On/off button 2 Programme guide 3 Program touchpad 4 Programme indicators 5 Display 6 Delay touchpad 7 Start touchpad 8 Indicators 9 Option touchpad Indicators Description Multitab indicator. ProBoost indicator. Extra Hygiene indicator. Washing phase indicator...

PROGRAMMES Programme Degree of soilType of load Programme phases Options 1) AllCrockery, cutlery,pots and pans PrewashWash 45 °C or 70 °CRinsesDry ÖKO PLUS 2) Heavy soilCrockery, cutlery,pots and pans PrewashWash 70 °CRinsesDry ÖKO PLUSProBoost 3) Normal soilCrockery and cut-lery PrewashWash 50 °CRi...

OPTIONS MULTITAB OPTION Activate this option only when you use thecombi detergent tablets.This option deactivates the flow of rinseaid and salt. The related indicators are off.The programme duration can increase. ÖKO PLUS This function decreases the temperaturein the drying phase. The energy consump...

BEFORE FIRST USE 1. Make sure that the set level of the wa-ter softener agrees with the waterhardness in your area. If not, adjust thewater softener. Contact your local wa-ter authority to know the water hard-ness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the...

Manual adjustment Turn the water hardness dial to the posi-tion 1 or 2. Electronic adjustment 1. Press the on/off button to activate theappliance. 2. Make sure that the appliance is in set-ting mode. Refer to ‘SETTING ANDSTARTING A PROGRAMME’. 3. Press and hold Delay and Start at the same time until...

FILLING THE RINSE AID DISPENSER M AX 1 2 3 4 + - A B D C CAUTION! Only use rinse aid for dishwashers.Other products can cause dam-age to the appliance. The rinse aid, during the last rins-ing phase, helps to dry the disheswithout streaks and stains. 1. Press the release button ( D ) to open the lid ...

DAILY USE 1. Open the water tap. 2. Press the on/off button to activate theappliance. Make sure that the appli-ance is in setting mode. Refer to ’SET-TING AND STARTING A PRO-GRAMME’.• If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispens...

CARE AND CLEANING WARNING! Before maintenance, deactivatethe appliance and disconnect themains plug from the mains socket. Dirty filters and clogged sprayarms decrease the washing re-sults.Make a check regularly and, ifnecessary, clean them. CLEANING THE FILTERS C B A 1. Turn the filter ( A ) counte...

TROUBLESHOOTING The appliance does not start or it stopsduring operation.Before you contact the Service, refer tothe information that follows for a solutionto the problem. With some problems, the display showsan alarm code: • - The appliance does not fill with water. • - The appliance does not drain...

THE WASHING RESULTS AND DRYING RESULTS ARE NOTSATISFACTORY Problem Possible cause Possible solution The dishes are notclean. The filters are clogged. Clean the filters. The filters are not correctlyassembled and installed. Make sure that the filters arecorrectly assembled and in-stalled. The spray a...

Problem Possible cause Possible solution The quantity of detergentwas too much. Make sure that you add thecorrect quantity of detergentin the dispenser before youstart a programme. Dry water dropstains on glassesand dishes. The released quantity ofrinse aid was not sufficient . Increase the released...