AEG Favorit 55602 W0P- User Manual

Programme Degree of soilType of load Programmephases Options 5) Normal soilCrockery and cut-lery PrewashWash 50 °CRinsesDry ExtraHygiene Light soilCrockery and cut-lery Wash 55 °CRinses ExtraHygiene 6) All Prewash 1) The appliance senses the degree of soil and the quantity of items in the baskets. I...

5. OPTIONS 5.1 Multitab Activate this option only when you usethe combi detergent tablets.This option deactivates the flow of rinseaid and salt. The related indicators areoff.The programme duration can increase. 5.2 ExtraHygiene With this option you have better hygieneresults. During the rinsing pha...

6.1 Adjusting the water softener Water hardness Water softener adjustment German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Electronic 47 - 50 84 - 90 8.4. - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - ...

6.2 Filling the salt container 1. Turn the cap counterclockwise andopen the salt container. 2. Put 1 litre of water in the salt con-tainer (only for the first time). 3. Fill the salt container with dishwash-er salt. 4. Remove the salt around the openingof the salt container. 5. Turn the cap clockwis...

5. Set and start the correct programmefor the type of load and the degreeof soil. 7.1 Using the detergent 20 30 M A X 1 2 3 4 + - A B C 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart-ment ( A ) . 3. If the programme has a prewashphase, put a small quanti...

Cancelling the delay startwhile the countdown operates When you cancel the delay start, also theprogramme is cancelled. 1. Press and hold, at the same time, De- lay and Start until all the programme indicators come on and the displayshows 2 horizontal status bars. 2. Set the programme again. Cancell...

• Do not put in the appliance items made of wood, horn, aluminium, pew-ter and copper. • Do not put in the appliance items that can absorb water (sponges, householdcloths). • Remove remaining food from the items. • To remove easily remaining burned food, soak pots and pans in water be-fore you put t...

A1 A2 2. To disassemble the filter ( A ), pull apart ( A1 ) and ( A2 ). 3. Remove the filter ( B ). 4. Wash the filters with water. 5. Before you put the filter ( B ) back, make sure that there are no residuesof food or soil in or around the edgeof the sump. 6. Make sure that the filter ( B ) is cor...

Problem Possible solution Make sure that there is not a damaged fusein the fuse box. The programme does not start. Make sure that the appliance door is closed. Press Start . If the delay start is set, cancel the setting orwait for the end of the countdown. The appliance does not fill withwater. Make...

, and start to flash. 3. Press Option . • The indicators of and go off. • The indicator continues to flash. • The display shows the current set- ting. Rinse aid dis-penser off Rinse aid dis-penser on 4. Press Option to change the setting. 5. Press the on/off button to deactivatethe appliance and to ...