AEG F88419W0P- User Manual

3. CONTROL PANEL 1 2 4 6 8 3 7 5 1 On/off button 2 Program touchpad 3 Programme indicators 4 Display 5 Delay touchpad 6 Start touchpad 7 Indicators 8 Option touchpad Indicators Description Multitab indicator. ÖKO PLUS indicator. ExtraHygiene indicator. Washing phase indicator. Rinsing phase indicato...

4. PROGRAMMES Programme Degree of soilType of load Programmephases Options 1) AllCrockery, cutlery,pots and pans PrewashWash 45 °C or 70 °CRinsesDry ExtraHygiene 2) ÖKO PLUS 2) 3) Heavy soilCrockery, cutlery,pots and pans PrewashWash 70 °CRinsesDry ÖKO PLUS 4) Normal soilCrockery and cut-lery Prewas...

7) With this programme you can wash a load with mixed soil. Very heavy soil in the lower basket and normal soil in the upper basket. The water pressure and the watertemperature in the lower basket are higher than in the upper basket. Consumption values Programme 1) Duration(min) Energy(kWh) Water(l)...

PressOption 1 time on off off 2 times off on off 3 times on on off 4 times off off on 5 times on off on 6 times off off off If you stop to use the combidetergent tablets, before you start to use separately detergent, rinse aidand dishwasher salt, do these steps:1. Adjust the water softener to the hi...

You must adjust the water soft-ener manually and electronically. Manual adjustment Turn the water hardness dial to the posi-tion 1 or 2. Electronic adjustment 1. Press the on/off button to activatethe appliance. Make sure that the ap-pliance is in setting mode, refer to“Setting and starting a progra...

6.3 Filling the rinse aid dispenser M AX 1 2 3 4 + - A B D C 1. Press the release button ( D ) to open the lid ( C ). 2. Fill the rinse aid dispenser ( A ), no more than the mark 'max'. 3. Remove the spilled rinse aid with anabsorbent cloth to prevent too muchfoam. 4. Close the lid. Make sure that t...

Important • Let the dishes become cold before you remove them from the appliance.Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the upper basket. • There can be water on the sides and on the door of the appliance. Stainlesssteel becomes cool more quickly ...

• The position of the items in the bas- kets is correct. • The programme is applicable for the type of load and for the degree of soil. • The correct quantity of detergent is used. • There is dishwasher salt and rinse aid (unless you use combi detergent tab-lets). • The cap of the salt container is ...

9.3 External cleaning Clean the appliance with a moist softcloth.Only use neutral detergents. Do not useabrasive products, abrasive cleaningpads or solvents. 9.4 Internal cleaning If you regularly use short duration pro-grammes, these can leave deposits of grease and limescale inside the appli-ance....

Problem Possible solution Make sure that the drain hose has no kinksor bends. The anti-flood device is on. Close the water tap and contact the Service. After the checks are completed, activatethe appliance. The programme contin-ues from the point of interruption.If the problem occurs again, contact ...

Electrical connection Refer to the rating plate. Voltage 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Water supply 1) Cold water or hot water 2) max. 60 °C Capacity Place settings 9 Power consumption Left-on mode 0.10 W Off-mode 0.10 W 1) Connect...