Page 3 - CONTENTS
CONTENTS 4 Safety information 6 Product description 8 Control panel 11 Use of the appliance 11 Setting the water softener 13 Use of dishwasher salt 13 Use of detergent and rinse aid 15 Multitab function 15 Loading cutlery and dishes 17 Washing programs 19 Setting and starting a washing program 21 Ca...
Page 4 - Correct use
SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. Correct use • On...
Page 5 - • Do not use the appliance:
Child safety • Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have super- vision or instruction for the operation by a person who is responsible for their safety. • Children should be sup...
Page 6 - PRODUCT DESCRIPTION; Internal light
PRODUCT DESCRIPTION 2 3 4 5 6 7 1 8 9 10 1 Upper basket 2 Air vent and water hardness dial 3 Salt container 4 Detergent dispenser 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm 10 Top spray arm Internal light This appliance has an internal light that comes on when...
Page 7 - TimeBeam
TimeBeam The TimeBeam shows, on the kitchen floor, the time of the washing program or the countdown of the delay start. With the TimeBeam you always know the remain- ing time of the washing program and/or of the delay start. Nine different colours are available for TimeBeam (refer to ‘Control panel’...
Page 8 - CONTROL PANEL; The display
CONTROL PANEL The controls are on the top of the control panel. To operate with the controls keep the ap- pliance door ajar. 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Delay start touchpad 4 Program touchpad 5 Extra - Hygiene touchpad 6 ÖKO PLUS touchpad 7 Multitab touchpad 8 RESET touchpad 9 Ind...
Page 10 - Acoustic signals; Deactivating the acoustic signals; Setting the colour of the TimeBeam; Control panel
• To deactivate or activate the acoustic signals.• To set the colour of the TimeBeam. Switch on the appliance. The appliance is in setting mode when: • The display shows two horizontal status bars. Switch on the appliance. The appliance is not in setting mode when: • The display shows the time of th...
Page 11 - USE OF THE APPLIANCE; Refer to the specific instructions for each step of the procedure.; SETTING THE WATER SOFTENER
• The display shows a number followed by the letter C . On the floor you can see the colour that is related to the number. 5. Press touchpad (6) again and again to change the colour. Each time you press touchpad (6), the number in the display and the colour on the floor change (0 C = TimeBeam dec- a...
Page 12 - You must set the water softener manually and electronically.; Manual adjustment; The appliance is set at the factory at position 2.; Electronic adjustment; The appliance is factory set at level 5.
Water hardness Water hardness setting mg/l ppm mmol/l manually electronically 260 - 329 260 - 329 2.6 - 3.2 1 4 190 - 259 190 - 259 1.9 - 2.5 1 3 70 - 189 70 - 189 0.7 - 1.8 1 2 < 70 < 70 < 0.7 1 1 1) 1) No use of salt required. You must set the water softener manually and electronically. M...
Page 13 - USE OF DISHWASHER SALT; Filling the salt container; USE OF DETERGENT AND RINSE AID
USE OF DISHWASHER SALT CAUTION! Only use dishwasher salt. Types of salt that are not suitable for dishwashers cause damage to the water softener. CAUTION! Grains of salt and salty water on the bottom of the appliance can cause corrosion. Fill the appliance with salt before you start a washing progra...
Page 14 - Use of detergent; Filling with detergent; Use of rinse aid; Filling with rinse aid; Adjusting the rinse aid dosage
Use of detergent CAUTION! Only use detergents (powder, liquid or tablet) that are suitable for dishwashers. Follow the recommendations on the detergent packaging for the use and storage of the detergent. To help the environment, do not use more than the correct quantity of detergent. Filling with de...
Page 15 - MULTITAB FUNCTION; To activate the multitab function; LOADING CUTLERY AND DISHES; Helpful hints and tips
MULTITAB FUNCTION The multitab function is for combi detergent tablets. These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tab- lets can contain other agents. Be sure that these tablets are suitable for the water hardness in your area (refer to the in- structions...
Page 17 - WASHING PROGRAMS; Washing programs
WASHING PROGRAMS Program Type of soil Type of load Program description Functions 1 1) All Crockery, cut- lery, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry Extra - Hygiene ÖKO PLUS 2 Heavy soil Crockery, cut- lery, pots and pans Prewash Wash 70 °C Rinses Dry ÖKO PLUS 3 2) Normal soil Crocker...
Page 18 - dishes can change the consumption values.
4) This is the standard program for test institutes. With this program you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information. 5) With this program you can wash a load with mixed soil. Very heavy s...
Page 19 - SETTING AND STARTING A WASHING PROGRAM; Starting the washing program without delay start; Hygiene and/or the ÖKO PLUS function. Set these functions; Starting the washing program with delay start; countdown continues from the point of interruption.; Cancelling the delay start; If the appliance door is open, and the countdown has not started
SETTING AND STARTING A WASHING PROGRAM Starting the washing program without delay start 1. Switch on the appliance. Make sure that the appliance is in setting mode.2. Set the washing program. The number related to the washing program flashes in the display. 3. If you want, set the Extra - Hygiene an...
Page 20 - more quickly than the dishes.
Interrupting a washing program • Open the appliance door. The washing program stops.• Close the appliance door. The washing program continues from the point of interruption. Cancelling the washing program If the washing program has not started, you can change the selection. To change the selection w...
Page 21 - CARE AND CLEANING; To remove and clean the filters
CARE AND CLEANING To remove and clean the filters WARNING! Switch the appliance off before you carry out any cleaning operation. Dirty filters decrease the washing results. Although the maintenance is very low with these filters, we recommend that you regularly check the filters and clean them if ne...
Page 23 - WHAT TO DO IF...; With some malfunctions, the display shows an alarm code:
WHAT TO DO IF… The appliance does not start or stops during operation. If there is a fault, first try to find a solution to the problem yourself. Refer to following charts. If you cannot find a solution to the problem, contact your dealer or the Customer Care Centre. With some malfunctions, the disp...
Page 24 - The washing results and drying results are not satisfactory; What to do if...
If the display shows an alarm code, not described in the chart, contact your Customer Care Centre. When you contact the Customer Care Centre you will need to give some details of the ap- pliance that can be found on the rating plate (e.g. model number, serial number, product number). We recommend th...
Page 25 - Activating the rinse aid dispenser
Problem Possible cause Possible solution The multitab function is activa- ted (this function automatical- ly deactivates the rinse aid dis- penser). Activate the rinse aid dispenser. Activating the rinse aid dispenser 1. Switch on the appliance. Make sure that the appliance is in setting mode.2. Pre...
Page 26 - Install the appliance under a kitchen counter.
TECHNICAL DATA Dimensions Width Height Depth 596 mm 818 - 878 mm 595 mm Electrical connection Voltage Overall power Fuse Frequency 220 - 240 V 2200 W 10 A 50 Hz Water supply pressure min. max. 50 kPa (7 psi) 800 kPa (116 psi) Capacity Place settings 13 INSTALLATION If floor is not level, adjustlevel...
Page 30 - WATER CONNECTION; Water inlet hose; Inlet water supply
WATER CONNECTION Water inlet hose Connect the inlet hose to a water tap with an external BSP thread spout of 3/4”. For best washing performance it is recommended to connect the appliance to a cold water supply. Energy savings can be made by connecting the appliance to a Solar water system and using ...
Page 31 - Water drain hose
WARNING! Dangerous voltage In order to pass the safety valve through the kitchen cabinets, an opening of at least 45 mm x 90 mm is needed. Water drain hose Use the supplied hose clamp to connect the water drain hose to the sink. The highest point of the drain hose must be no more than 600 mm from th...
Page 33 - ELECTRICAL CONNECTION; hazard through overheating.; ENVIRONMENT CONCERNS; ance and endangering their lives.; Old appliance; Electrical connection
ELECTRICAL CONNECTION WARNING! • The manufacturer accepts no liability for failure to observe the below safety precautions.• Safety standards require the appliance to be earthed.• Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate ma...
Page 34 - WARRANTY
WARRANTY FOR SALES IN AUSTRALIA AND NEW ZEALAND ALL AEG BRANDED APPLIANCES This document sets out the terms and conditions of the product warranties for AEG Ap - pliances. It is an important document. Please keep it with your proof of purchase docu - ments in a safe place for future reference should...
