Page 2 - CONTENTS
CONTENTS 1 IMPORTANT SAFETY INSTRUCTIONS ..............4 2 INSTALLATION ......................................................9 3 TECHNICAL SPECIFICATIONS .........................11 4 BEFORE USING THE APPLIANCE ...................12 5 LOADING YOUR DISHWASHER ........................16 6 PROGRAMS AN...
Page 3 - Thank you for choosing this product.; assist you in the operation and maintenance of your appliance.
USA-CAN - 2 Thank you for choosing this product. This user manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this user manual before using your appliance and keep this book for futu...
Page 4 - INTRODUCTION; save you time and effort and help to ensure optimum
INTRODUCTION Please read this user manual and particularly the safety instructions completely and carefully. They will save you time and effort and help to ensure optimum dishwasher performance.Be sure to observe all listed warnings and cautions. Look particularly for the icons with exclamation mark...
Page 5 - change the specification of the appliance.; The; to minimize the risk of fire or explosion and to prevent
1 IMPORTANT SAFETY INSTRUCTIONSWARNING: When using the dishwasher, follow basic precautions. Read all instructions before using the dishwasher! Save these operating instructions and pass them on to any future user.• Use the dishwasher only for its intended purpose as described in this user manual. T...
Page 9 - RECYCLING; • Cut off the mains cable and discard it.; Risk of injury or suffocation!
RECYCLING Remove the door to the washing compartment when removing an old dishwasher from service or discarding it. Ensure that the appliance presents no danger to children while being stored for disposal. Before disposing the dishwasher:• Disconnect the appliance from the mains supply. • Cut off th...
Page 10 - INSTALLATION; performed by a qualified installer. Work by unqualified
2 INSTALLATION WARNING: When installing the dishwasher, follow basic precautions, including the following: Please check the standards and local codes for placement of machine.• Installation, maintenance and repair should be performed by a qualified installer. Work by unqualified persons could be dan...
Page 12 - TECHNICAL SPECIFICATIONS; General Appearance; may change our specifications and
3 TECHNICAL SPECIFICATIONS 5 6 12 1 2 3 4 11 10 89 General Appearance 1. Upper basket with racks 2. Upper spray arm 3. Lower basket 4. Lower spray arm 5. 3rd basket 6. Top nozzle 7. Filters 8. Rating plate 9. Control panel 10. Detergent and rinse-aid dispenser 11. Salt dispenser 12. Upper basket tra...
Page 13 - Preparing your dishwasher for first use; water specifications match the values; Only add water to the salt compartment
4 BEFORE USING THE APPLIANCE Preparing your dishwasher for first use • Make sure the electricity and supply water specifications match the values indicated in the installation instructions for the machine. • Remove all packaging material inside the machine. • Set the water softener level.• Fill the ...
Page 14 - display. The machine will display the last setting,
Test Strip Run water through the tap (1min.) Keep the strip in the water (1sec) Shake the strip. Wait (1min.) Set the hardness level of your machine. 1 2 3 4 5 6 NOTE: The level is set to 1 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter a...
Page 15 - Detergent usage; streaks in; Filling the detergent; Using combined detergents; pressing “Program Selection + Cancel”
Detergent usage Only use detergents specifically designed for domestic dishwashers. Keep your detergents in cool, dry places out of reach of children. Add the proper detergent for the selected program to ensure the best performance. The amount of detergent needed depends on the cycle, load size, and...
Page 17 - LOADING YOUR DISHWASHER
5 LOADING YOUR DISHWASHER If you properly place your dishes into the machine, you will be using it in the best way in terms of energy consumption, washing and drying performance. You can load into the lower basket such round and deep items as pots with long handles, pot lids, plates, salad plates, c...
Page 18 - You can load the cutlery such as knives,
USA-CAN - 1 7 Upper Rack Load the upper rack with dessert plates, cups, glasses etc. Top rack load pattern for 8 place settings. Lower Rack You can load into the lower basket such round and deep items as pots with long handles, pot lids, plates, salad plates, cutlery sets. The lower rack should not ...
Page 19 - Loading cutlery basket; Incorrect Loads
USA-CAN - 1 8 Loading cutlery basket ( Model Depending ) 6 1 2 3 4 5 Cutlery Basket load pattern for 8 place settings . 1: Salad Fork 2: Teaspoon 3: Dinner fork 4: Knife-solid handle 5: Serving spoon 6: Serving fork WARNING: Sharp cutlery may have shifted position during the wash operation and can b...
Page 20 - place glasses of different sizes under the
USA-CAN - 19 Top Basket Rack with height adjustment These racks are designed to increase the capacity of top basket. You can place your cups and glasses on these racks. Thanks to adjustable feature of the racks, you can place glasses of different sizes under the racks. Height adjustment plastics mou...
Page 23 - PROGRAMS AND OPTIONS TABLE; Programs
6 PROGRAMS AND OPTIONS TABLE Programs Duration (min) Descriptions Regular Dirty 14 0 Standard program for daily, regular or typical use to completely wash a load of normally soiled dishes. Clean 1 05 Auto Dirty 155 This program automatically adjusts the temperature and the quantity of water, the ene...
Page 24 - Water Temperature; To check water temperature entering dishwasher:
NOTE: The program duration may change according to the amount of dishes, the water temperature, the ambient temperature in the room, and any selected ad- ditional functions. NOTE: The energy-usage label is based on the “Regular” program. This program is the mos t efficient in terms of its combined e...
Page 25 - THE CONTROL PANEL; Program Selection/Cancel Key
7 THE CONTROL PANEL 1. Display 2. On/Off + Start/Pause Key 3. Program Selection + Cancel Key 4. Delay Timer Key 5. Sanitize Key 6. Extra Fast Key 7. Upper Basket Half Load Key 8. Lower Basket Half Load Key 9. Extra Dry Key 10. Hi-Temp Key 11. Sanitized Indicator 12. Salt Indicator (model depending) ...
Page 26 - audible; Extra Fast Key; selected program and close the door of the
program will not be active. Besides, the machine gives audible warning via buzzer. Sanitize Key Sanitize function raises the water temperature in the final rinse. i.Sanitized Indicator If the program selected with the Sanitize option is successfully sanitized, Sanitized Indicator lights up at the en...
Page 27 - Starting The Program; based on; Cancelling The Program; for 3 seconds to cancel the program.; Rinse Aid Indicator; control panel to see whether there; End of Program; cleared; Overflowing Warning
ii. Delay Timer function can not be set after the program starts. Starting The Program Open the door of your machine. Select the program and auxiliary functions. The program duration and program number will appear on the display alternately. Press “Start/Pause + On/Off” key. Close the door within 4 ...
Page 29 - Filter
USA-CAN - 2 8 8 MAINTENANCE AND CLEANING WARNING : Before cleaning or carrying out maintenance, switch off the appliance, disconnect the mains plug and turn off the water tap. Your dishwasher can only be repaired by an authorized service agent. (EURO-PARTS, 1-800-561-4614). Do not try to repair your...
Page 30 - Spray Arms; when refitting the upper spray arm.; Cleaning The Impellers; for the machine; Lower Impeller; Check if the holes on the lower spray arm; Lower spray arm is metal after removing the lower spray arm for
USA-CAN - 29 Spray Arms Check whether or not the holes for the upper and lower spray arms are clogged. If there is any clogging, remove the spray arms and clean them under water. You can remove the lower spray arm by pulling it upwards, while the upper spray arm nut can be removed by turning the nut...
Page 31 - Remove blue film before use.; Upper Impeller; Check if the holes on the upper impeller 1
USA-CAN - 3 0 Remove blue film before use. Upper Impeller Check if the holes on the upper impeller 1 are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller (A, B) Make sure that the nut is tightened well when installing the upper impeller.
Page 32 - WHAT SHOULD NOT BE WASHED IN YOUR DISHWASHER?
USA-CAN - 3 1 WHAT SHOULD NOT BE WASHED IN YOUR DISHWASHER? • All items to be placed in the dishwasher should be dishwasher safe. • Plastics with “dishwasher safe” or equivalent label can only be used in dishwashers. Plastics may lose their shape or color. Check with manufacturer for recommendations...
Page 33 - TROUBLESHOOTING
9 TROUBLESHOOTING USA-CAN - 3 2 FAULT POSSIBLE CAUSE TROUBLESHOOTING The programme does not start. Your Dishwasher is not plugged in. Plug your Dishwasher in. Your Dishwasher is not switched on. Switch your Dishwasher on by pressing the On/Off button. Fuse blown. Check your indoor fuses. Water inlet...
Page 35 - AUTOMATIC FAULT WARNINGS AND WHAT TO DO
USA-CAN - 3 4 AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE CODE POSSIBLE FAULT WHAT TO DO FF Water inlet system failure Make sure the water inlet tap is open and water is flowing. Separate the inlet hose from the tap and clean the filter of the hose. Contact for service if the error continues. F5...
Page 36 - PRACTICAL INFORMATION; disconnect
PRACTICAL INFORMATION 1.. When the machine isn’t in operati • Disconnect the plug and close the ta • Leave the door slightly open to prevent odour formatio 2. Select the dry option to remove water droplet 3. Place dishes in the machine properly to achieve the best energy consumption, washi and dryin...
Page 37 - XXXXXX
