Page 2 - CUSTOMER CARE AND SERVICE
CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION...............................
Page 4 - SAFETY INSTRUCTIONS; Installation
• Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. • Do not keep the appliance door open without supervision to prevent to fall on it. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. •...
Page 6 - PRODUCT DESCRIPTION
3. PRODUCT DESCRIPTION 6 5 9 11 10 7 8 12 13 3 4 2 1 1 Worktop 2 Top spray arm 3 Upper spray arm 4 Lower spray arm 5 Filters 6 Rating plate 7 Salt container 8 Air vent 9 Rinse aid dispenser 10 Detergent dispenser 11 Lower basket 12 Upper basket 13 Cutlery drawer www.aeg.com 6
Page 7 - CONTROL PANEL; Indicators
4. CONTROL PANEL 1 2 4 5 6 8 3 7 1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Option button 7 Indicators 8 Start button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing p...
Page 8 - PROGRAMMES
5. PROGRAMMES Programme Degree of soilType of load Programme phases Options 1) • Normal soil• Crockery and cut- lery • Prewash• Wash 50 °C• Rinses• Dry • ExtraHygiene• TimeSaver• Multitab 2) • All• Crockery, cutlery, pots and pans • Prewash• Wash from 45 °C to 70 °C • Rinses• Dry • ExtraHygiene• Mul...
Page 9 - SETTINGS
5.1 Consumption values Programme 1) Water (l) Energy (kWh) Duration (min) 11 0.961 225 7 - 14 0.6 - 1.4 40 - 150 14 - 16 1.2 - 1.5 139 - 149 12.5 - 14.5 1.4 - 1.6 154 - 164 12 - 14 0.7 - 0.9 75 - 85 10 0.9 30 9 - 10 1.0 - 1.2 219 - 229 1) The pressure and the temperature of the water, the variations...
Page 10 - How to set the water softener
The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales.The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. It is im...
Page 11 - OPTIONS
and start to flash and the display is blank. 2. Press Delay . • The indicators and go off. • The indicator continues to flash. • The display shows the current setting: e.g. = level 4. – The levels of rinse aid are from 0A to 6A. – Level 0 = no rinse aid is released. 3. Press Delay again and again to...
Page 12 - BEFORE FIRST USE
7.1 Multitab Activate this option when you use multi- tablets that integrate the salt, rinse aid and detergent functions. They can also contain other cleaning or rinsing agents.This option deactivates the release of salt. The salt indicator does not come on.This option also deactivates the release o...
Page 13 - DAILY USE
How to fill the salt container 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (Only for the first time). 3. Fill the salt container with dishwasher salt. 4. Remove the salt around the opening of the salt container. 5. Turn the cap ...
Page 15 - HINTS AND TIPS
Make sure that there is detergent in the detergent dispenser before you start a new programme. End of the programme When the programme is completed the display shows 0:00 and the end indicator is onAll buttons are inactive except for the on/off button. 1. Press the on/off button or wait for the Auto...
Page 16 - CARE AND CLEANING; Cleaning the filters
10.4 Loading the baskets • Only use the appliance to wash items that are dishwasher-safe. • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the item...
Page 18 - TROUBLESHOOTING
• If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month. • To maintain the performance of your appliance at its best, we recommend to use monthly ...
Page 19 - The washing and drying results are not satisfactory; TECHNICAL INFORMATION; ENVIRONMENT CONCERNS
12.1 The washing and drying results are not satisfactory Problem Possible solution There are whitish streaks orbluish layers on glasses anddishes. • The release quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position. • The quantity of detergent is too much. There are st...