AEG F45700VI0P- User Manual

11 Upper basket 12 Cutlery drawer 4. CONTROL PANEL 1 3 5 2 4 1 On/off button 2 Programme buttons 3 Delay button 4 Indicators 4.1 Indicators Indicator Description End indicator. XtraDry indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off whi...

Programme Degree of soilType of load Programme phases Options • Normal or light soil • Delicate crockery and glassware • Wash 45 °C• Rinses• Dry • XtraDry 4) • Fresh soil• Crockery and cut- lery • Wash 60 °C• Rinses • XtraDry 1) With this programme you have the most efficient use of water and energy...

• The activation or deactivation of the rinse aid empty notification. • The level of rinse aid according to the required dosage. These settings will be saved until you change them again. How to set the programme selection mode The appliance is in programme selection mode when only the indicator of t...

inside the appliance. Do not use detergent and do not load the baskets. When you start a programme, the appliance can take up to 5 minutes to recharge the resin in the water softener. It seems that the appliance is not working. The washing phase starts only after this procedure is completed. The pro...

Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the programme and options again. Press and hold simultaneously and until the appliance is in programme selection mode. Cancelling the programme Press and hold simultaneously and until the applianc...

2. Make sure that the salt and rinse aid containers are full. 3. Start the shortest programme with a rinsing phase. Do not add detergent and do not load the baskets. 4. When the programme is completed, adjust the water softener according to the water hardness in your area. 5. Adjust the released qua...

3. Wash the spray arm under running water. Use a thin pointed tool, e.g. toothpick, to remove particles of soil from the holes. 4. To engage again the spray arm to the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn it counterclockwise until ...

Problem and alarm code Possible cause and solution The program lasts too long. • If the delayed start option is set, cancel the de- lay setting or wait for the end of the count-down. Small leak from the appliance door. • The appliance is not levelled. Loosen or tight- en the adjustable feet (if appl...

Problem Possible cause and solution Limescale deposits on the ta-bleware, on the tub and onthe inside of the door. • The level of salt is low, check the refill indicator.• The cap of the salt container is loose.• Your tap water is hard. Refer to "The water softener" . • Even using multi-func...