AEG C502D-ML/GB- User Manual

Page 2 - S T

2 Printed on recycled paper. AEG – putting words into action. MADE IN GERMANY O K O S Y S T E M

Page 3 - Contents

3 Contents Electrical connections .......................................................... 4 Safety warnings for electricians .............................................. 4 Appliances with 2 wires .......................................................... 5 Safety warnings for kitchen unit insta...

Page 4 - E l e c t r i c a l c o n n e c t i o n s; S a f e t y

4 It must be ensured that the voltage and current indicated on therating plate agree with the voltage of the user to electricity supply. If the appliance has been equipped with a mains lead with amoulded-on type plug, the following regulations must be complywith:The plug moulded on to the lead incor...

Page 5 - IMPORTANT; Electrical connection for the UK

5 The appliance must be connected to fixed wiring with a doublepole switched fused spur outlet with or without pilot lamp. We strongly recommend the appliance to be connected only by aqualified electrician who is a member of the NICEIC who will com-ply with the IEE and any local regulations. NOTE:Th...

Page 7 - G e n e r a l d e t a i l s

7 When used as an extractor unit, the hood must be fitted with a100mm diameter hose. If the fumes must be forced out through the wall, you must obtaina MKZ sizable wall exhaust pipe (with external exhaust and airintake), E-Nr.- 610 899 004 (Ø 120 mm) which is one of ouroptional parts. When installin...

Page 9 - Model; Height; Lengt of the cable: 110 cm

9 Description of the appliance 1) Light switch2) Motor switch3) Work surface lamp4) Grid 4 3 T e c h n i c a l d e t a i l s Model 502 D Net weight: 5 kg Height 145 mm Width 520 mm Depth 285 mm Absorbed power: 160W Motor: 1 x 120 W Lighting: 1 x 40 Watt Lengt of the cable: 110 cm Fan powers (speed),...

Page 12 - H o o d O p e r a t i o n; C o n t r o l s

12 H o o d O p e r a t i o n A B The hood is fitted with a variable speed motor. The most effectiveuse of the hood is obtained by switching it on a few minutes beforeyou start cooking and leaving it on a for approximately 15 minutesafter you have finished, thus ensuring all cooking odours areelimina...

Page 13 - C a r e a n d M a i n t e n a n c e; H a n d - w a s h i n g

13 Before performing any maintenance operation, disconnect thehood from the electricity. The hood has a metal grease filter.To clean the filter, proceed as follows:Open the grill by turning knob A (fig. 2). Pull the two plastic stops B as shown by the arrows (fig. 5) andremove the metal filter. You ...

Page 15 - Always turn off the electricity before replacing lamps!; replace them if necessary.; C l e a n i n g

15 Always turn off the electricity before replacing lamps! 1) Remove the grid (Fig. 2) in order to check the lamps and replace them if necessary. 2) Unscrew the lamps that do not work and replace them with 40W max lamps (E14). If the light does not function, check that the lamps are properlyscrewed ...

Page 16 - S p e c i a l a c c e s s o r i e s; Symptom; The cooker hood is not working

16 See AEG price-list for wallbox and hose accessories. KF-Plus charcoal filter E-Nr. 942 118 620 S p e c i a l a c c e s s o r i e s What to do if If your appliance fails to work properly please carry out thefollowing checks. Symptom Solution The cooker hood will not start... Check that:The hood is...

Page 18 - Guarantee conditions; The guarantee covers all parts or components which fail

18 Guarantee conditions Guarantee ConditionsAEG offer the following guarantee to the first purchaser of thisappliance.1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, whichmust be verified by purchase invoice or similardocumentation....

AEG C502D-ML/GB- User Manual

Table of Contents:

Summary

Other AEG Models